Changes in the heat of melting of a superelastic eutectic Sn–38 wt % Pb alloy due to preliminary plastic deformation

被引:0
|
作者
V. F. Korshak
I. V. Postavnichii
N. V. Tkachenko
机构
[1] Karazin Khar’kov National University,
来源
The Physics of Metals and Metallography | 2015年 / 116卷
关键词
specific heat of melting; superplasticity; eutectic alloy; metastability of phase state; heating; plastic deformation; differential thermal analysis;
D O I
暂无
中图分类号
学科分类号
摘要
The effect of an external compressing stress applied in the process of heating from room temperature to the preeutectic temperature on the specific heat of melting of an alloy Sn–38 wt % Pb has been investigated. The chosen stress range of 0–7.5 MPa includes stresses at which the alloy manifests superplastic properties. The experiments were conducted using the differential thermal analysis method. For the first time, a nonmonotonic dependence of the specific heat of melting of superplastic eutectic alloys on the magnitude of applied stress has been detected. These results have been explained by the metastability of the initial phase state of the alloy and by the stimulating influence of the plastic deformation depending on the level of external stresses on the processes providing a transition of the alloy to the equilibrium state.
引用
收藏
页码:1029 / 1034
页数:5
相关论文
共 49 条
  • [41] FATIGUE FAILURE IN PB-SN-AG ALLOY DURING PLASTIC-DEFORMATION - A 3D-SIMS IMAGING STUDY
    SCANDURRA, A
    LICCIARDELLO, A
    TORRISI, A
    LAMANTIA, A
    PUGLISI, O
    JOURNAL OF MATERIALS RESEARCH, 1992, 7 (09) : 2395 - 2402
  • [42] Maximum shear stress-controlled uniaxial tensile deformation and fracture mechanisms and constitutive relations of Sn-Pb eutectic alloy at cryogenic temperatures
    Ji, Xiaoliang
    An, Qi
    Xia, Yiping
    An, Rong
    Zheng, Rui
    Wang, Chunqing
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 819
  • [43] Estimation of Interfacial Heat Transfer Coefficient for Horizontal Directional Solidification of Sn-5 wt%Pb Alloy Using Genetic Algorithm as Inverse Method
    Vishweshwara, P. S.
    Gnanasekaran, N.
    Arun, M.
    SOFT COMPUTING FOR PROBLEM SOLVING, SOCPROS 2017, VOL 1, 2019, 816 : 447 - 459
  • [44] X-ray diffraction study of structural and phase states of a superplastic Sn-38 wt % Pb alloy and their variations under the effect of external mechanical stresses and aging
    V. F. Korshak
    Yu. A. Shapovalov
    A. L. Samsonik
    P. V. Mateichenko
    The Physics of Metals and Metallography, 2012, 113 : 190 - 199
  • [45] X-ray diffraction study of structural and phase states of a superplastic Sn-38 wt % Pb alloy and their variations under the effect of external mechanical stresses and aging
    Korshak, V. F.
    Shapovalov, Yu. A.
    Samsonik, A. L.
    Mateichenko, P. V.
    PHYSICS OF METALS AND METALLOGRAPHY, 2012, 113 (02): : 190 - 199
  • [46] Changes of Superconducting Properties Due to the Unidirectional Tensile Deformation on Bronze-Processed Nb3Sn Multifilamentary Wires Using Various Cu-Sn-Zn Ternary Alloy Matrices
    Hishinuma, Yoshimitsu
    Oguro, Hidetoshi
    Taniguchi, Hiroyasu
    Kikuchi, Akihiro
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2018, 28 (03)
  • [47] Simultaneous estimation of unknown parameters using a-priori knowledge for the estimation of interfacial heat transfer coefficient during solidification of Sn–5wt%Pb alloy—an ANN-driven Bayesian approach
    P S Vishweshwara
    N Gnanasekaran
    M Arun
    Sādhanā, 2019, 44
  • [48] Microstructural Changes During Plastic Deformation and Corrosion Properties of Biomedical Co-20Cr-15W-10Ni Alloy Heat-Treated at 873 K
    Kosuke Ueki
    Kyosuke Ueda
    Masaaki Nakai
    Takayoshi Nakano
    Takayuki Narushima
    Metallurgical and Materials Transactions A, 2018, 49 : 2393 - 2404
  • [49] Microstructural Changes During Plastic Deformation and Corrosion Properties of Biomedical Co-20Cr-15W-10Ni Alloy Heat-Treated at 873 K
    Ueki, Kosuke
    Ueda, Kyosuke
    Nakai, Masaaki
    Nakano, Takayoshi
    Narushima, Takayuki
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (06): : 2393 - 2404