Study on formability of vertical parts formed by multi-stage incremental forming

被引：0
|
作者：
Xiaofan Shi
G. Hussain
Guangcheng Zha
Mengling Wu
Fanxin Kong
机构：
[1] Nanjing Institute of Technology,College of Material Engineering
[2] Nanjing University of Aeronautics and Astronautics,College of Mechanical and Electrical engineering
[3] Eastern Mediterranean University,Department of Mechanical Engineering
[4] TRNC,undefined
来源：
The International Journal of Advanced Manufacturing Technology | 2014年 / 75卷
关键词：
Multi-stage incremental forming; Formability test; Forming strategy; Loading path;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Multi-stage incremental sheet metal forming (MS-ISF) is a good solution to overcome the maximum forming angle of single-stage incremental sheet metal forming. In order to test the formability of MS-ISF, a novel method to get forming limit diagram (FLD) of MS-ISF was proposed based on changing forming strategies. Aluminum alloy AA1060-O sheet was employed to prove the feasibility of the method. Test results show that the method can provide FLD of MS-ISF which is affected by loading path.
引用
收藏
页码：1049 / 1053
页数：4
相关论文
共 50 条
  • [21] FEA of vertical parts formed with multistage incremental sheet metal forming based on the forming limit stress diagram
    Wu, Mengling
    Zha, Guangcheng
    Gan Zirui
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2017, 93 (5-8): : 2155 - 2160
  • [22] FEA of vertical parts formed with multistage incremental sheet metal forming based on the forming limit stress diagram
    Mengling Wu
    Guangcheng Zha
    Gan Zirui
    [J]. The International Journal of Advanced Manufacturing Technology, 2017, 93 : 2155 - 2160
  • [23] Thickness distribution and design of a multi-stage process for sheet metal incremental forming
    Li, Junchao
    Hu, Jianbiao
    Pan, Junjie
    Geng, Pei
    [J]. INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2012, 62 (9-12): : 981 - 988
  • [24] Toolpath Planning and Generation for Multi-Stage Incremental Forming Based on Stretching Angle
    Zhu, Hu
    Cheng, Guixi
    Jung, Dongwon
    [J]. MATERIALS, 2021, 14 (17)
  • [25] Thickness distribution and design of a multi-stage process for sheet metal incremental forming
    Junchao Li
    Jianbiao Hu
    Junjie Pan
    Pei Geng
    [J]. The International Journal of Advanced Manufacturing Technology, 2012, 62 : 981 - 988
  • [26] Enhancement of formability of aluminum alloys in multi-stage forming operations by a local intermediate heat treatment
    Merklein, Marion
    Lechner, Michael
    Kuppert, Andreas
    [J]. PRODUCTION ENGINEERING-RESEARCH AND DEVELOPMENT, 2012, 6 (06): : 541 - 549
  • [27] Multi-stage single-point incremental forming: an experimental investigation of thinning and peak forming force
    Nikhil Bari
    Shailendra Kumar
    [J]. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2023, 45
  • [28] Multi-stage Single-Point Incremental Forming: An Experimental Investigation of Surface Roughness and Forming Time
    Bari, Nikhil
    Kumar, Shailendra
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2023, 32 (03) : 1369 - 1381
  • [29] Multi-stage Single-Point Incremental Forming: An Experimental Investigation of Surface Roughness and Forming Time
    Nikhil Bari
    Shailendra Kumar
    [J]. Journal of Materials Engineering and Performance, 2023, 32 : 1369 - 1381
  • [30] Multi-stage single-point incremental forming: an experimental investigation of thinning and peak forming force
    Bari, Nikhil
    Kumar, Shailendra
    [J]. JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2023, 45 (03)
12345