Flame-Sprayed Glaze Coatings: Effects of Operating Parameters and Feedstock Characteristics Onto Coating Structures

被引：0

作者：

A. Arcondéguy

A. Grimaud

A. Denoirjean

G. Gasgnier

C. Huguet

B. Pateyron

G. Montavon

机构：

[1] University of Limoges,SPCTS

[2] Imerys Tableware France,UMR CNRS 6638, Faculty of Sciences

来源：

Journal of Thermal Spray Technology | 2007年 / 16卷

关键词：

feedstock architecture; feedstock composition; flame spraying; glaze; operating parameters; thermally sensitive substrate; thick layer;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Many substrates do not sustain the conventional glazing process (i.e., vitreous glazing) due to the relatively high temperature required by this treatment (i.e., up to 1400 °C in some cases) to fuse glazes after their application on the surface to be covered. Flame spraying could appear as a solution to circumvent this limitation and to avoid thermal decomposition of substrates. This contribution describes some structural attributes of glaze coatings manufactured by flame spraying. It also discusses the influence of the feedstock powder morphology and some of its physical properties on coating characteristics.

引用

页码：978 / 990

页数：12

共 23 条

[21] Manufacturing of Al2O3 coatings by High Velocity Suspension Flame Spraying (HVSFS): coating properties and effect of operating parameters
Bolelli, G.
Bonferroni, B.
Cannillo, V.
Gadow, R.
Killinger, A.
Lusvarghi, L.
Rauch, J.
Stiegler, N.
METALLURGIA ITALIANA, 2011, (06): : 5 - 15
[22] The effects of fuel chemistry and feedstock powder structure on the mechanical and tribological properties of HVOF thermal-sprayed WC-Co coatings with very fine structures
Qiao, YF
Fischer, TE
Dent, A
SURFACE & COATINGS TECHNOLOGY, 2003, 172 (01): : 24 - 41
[23] Friction surfaced tool steel (H13) coatings on low carbon steel: A study on the effects of process parameters on coating characteristics and integrity
Rafi, H. Khalid
Ram, G. D. Janaki
Phanikumar, G.
Rao, K. Prasad
SURFACE & COATINGS TECHNOLOGY, 2010, 205 (01): : 232 - 242

← 1 2 3 →