Flame-Sprayed Glaze Coatings: Effects of Operating Parameters and Feedstock Characteristics Onto Coating Structures

被引：0
|
作者：
A. Arcondéguy
A. Grimaud
A. Denoirjean
G. Gasgnier
C. Huguet
B. Pateyron
G. Montavon
机构：
[1] University of Limoges,SPCTS
[2] Imerys Tableware France,UMR CNRS 6638, Faculty of Sciences
来源：
Journal of Thermal Spray Technology | 2007年 / 16卷
关键词：
feedstock architecture; feedstock composition; flame spraying; glaze; operating parameters; thermally sensitive substrate; thick layer;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Many substrates do not sustain the conventional glazing process (i.e., vitreous glazing) due to the relatively high temperature required by this treatment (i.e., up to 1400 °C in some cases) to fuse glazes after their application on the surface to be covered. Flame spraying could appear as a solution to circumvent this limitation and to avoid thermal decomposition of substrates. This contribution describes some structural attributes of glaze coatings manufactured by flame spraying. It also discusses the influence of the feedstock powder morphology and some of its physical properties on coating characteristics.
引用
收藏
页码：978 / 990
页数：12
相关论文
共 23 条
  • [1] Flame-sprayed glaze coatings:: Effects of operating parameters and feedstock characteristics onto coating structures
    Arcondeguy, A.
    Grimaud, A.
    Denoirjean, A.
    Gasgnier, G.
    Huguet, C.
    Pateyron, B.
    Montavon, G.
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2007, 16 (5-6) : 978 - 990
  • [2] Effects of spraying parameters onto flame-sprayed glaze coating structures
    Arcondeguy, A.
    Gasgnier, G.
    Montavon, G.
    Pateyron, B.
    Denoirjean, A.
    Grimaud, A.
    Huguet, C.
    SURFACE & COATINGS TECHNOLOGY, 2008, 202 (18): : 4444 - 4448
  • [3] STUDY ON ADHESION OF A POLYAMIDE COATING FLAME-SPRAYED ONTO A STEEL SUBSTRATE
    ASLOUN, EM
    CODDET, C
    VIDE-SCIENCE TECHNIQUE ET APPLICATIONS, 1993, (268): : 156 - 159
  • [4] Effect of Feedstock Powder Intrinsic Characteristics on the Tribological Behavior of Inductively Remelted NiCrBSi Flame-Sprayed Coatings
    Muntean, Roxana
    Valean, Petru-Cristian
    Kazamer, Norbert
    Utu, Ion-Dragos
    Marginean, Gabriela
    Serban, Viorel Aurel
    LUBRICANTS, 2023, 11 (09)
  • [5] Effects of Laser Remelting on Frictional Properties of Supersonic Flame-Sprayed Coatings
    Li, Fengbo
    Zhang, Conghui
    Li, Yan
    Pang, Qingtao
    COATINGS, 2024, 14 (03)
  • [6] STRUCTURAL CHARACTERISTICS OF FLAME-SPRAYED FE-NI-B ALLOY COATINGS
    BORISOV, YS
    OLIKER, VE
    KORZHIK, VN
    KUNITSKII, YA
    KRASYUK, AD
    REVO, SL
    SOVIET POWDER METALLURGY AND METAL CERAMICS, 1987, 26 (11): : 885 - 888
  • [7] Structural characteristics of flame-sprayed Fe-Ni-B alloy coatings
    Borisov, Yu.S.
    Oliker, V.E.
    Korzhik, V.N.
    Kunitskii, Yu.A.
    Krasyuk, A.D.
    Revo, S.L.
    Soviet powder metallurgy and metal ceramics, 1988, 26 (11): : 885 - 888
  • [8] Icephobic Behaviour and Thermal Stability of Flame-Sprayed Polyethylene Coating: The Effect of Process Parameters
    Donadei, Valentina
    Koivuluoto, Heli
    Sarlin, Essi
    Vuoristo, Petri
    JOURNAL OF THERMAL SPRAY TECHNOLOGY, 2020, 29 (1-2) : 241 - 254
  • [9] Icephobic Behaviour and Thermal Stability of Flame-Sprayed Polyethylene Coating: The Effect of Process Parameters
    Valentina Donadei
    Heli Koivuluoto
    Essi Sarlin
    Petri Vuoristo
    Journal of Thermal Spray Technology, 2020, 29 : 241 - 254
  • [10] Application of Flame-Sprayed Coatings as Heating Elements for Polymer-Based Composite Structures
    Adrián Lopera-Valle
    André McDonald
    Journal of Thermal Spray Technology, 2015, 24 : 1289 - 1301
123