Iron-bearing silicon nitride composite materials made from powders milled in a planetary mill

被引：0
|
作者：
V. N. Antsiferov
V. G. Gilev
V. I. Karmanov
机构：
[1] Research Institute for Problems of Powder Technology and Coatings,Research Center of Powder Materials
[2] Institute of Engineering Chemistry of the Russian Academy of Sciences,undefined
来源：
Refractories and Industrial Ceramics | 1997年 / 38卷
关键词：
Milling; Silicon Nitride; Powder Mill; Sialon; Sintered Material;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The effect of milling in an AGO-3 centrifugal planetary activator with steel milling balls on the properties of Si3N4 powders, the conditions of sintering, and the phase composition, structure, and properties of composite materials based on them is described. The possibility of and the process conditions for obtaining dense shock-resistant composite materials based on preliminarily milled β-Si3N4 (SHS) powder and additives that activate the sintering and consist of AlN, Al2O3, and ZrO2 powders are studied. It is established that in the sintered materials the presence of FeSi formed due to the interaction of Si3N4 and Fe that appears in the milling process does not worsen appreciably the thermomechanical properties of the composite materials.
引用
收藏
页码：354 / 357
页数：3
相关论文
共 31 条
  • [21] Sorption of toluene from aqueous solutions with polyethylene and cellulose powders and composite materials made from them
    Voronova, M. I.
    Golovanov, R. Yu.
    Zakharov, A. G.
    FIBRE CHEMISTRY, 2007, 39 (05) : 388 - 391
  • [22] Iron-bearing minerals from soils developing on volcanic materials from southern Chile. Mineralogical characterization supported by Mossbauer spectroscopy
    Pizarro, Carmen
    Escudey, Mauricio
    Gacitua, Manuel
    Fabris, Jose Domingos
    JOURNAL OF SOIL SCIENCE AND PLANT NUTRITION, 2017, 17 (02) : 341 - 365
  • [23] THERMAL-STABILITY OF POROUS SILICON-NITRIDE MATERIALS MADE FROM THIN-WALLED ELEMENTS
    ANTSIFEROV, VN
    GILEV, VG
    LANIN, AG
    POPOV, VP
    TKACHEV, AL
    SOVIET POWDER METALLURGY AND METAL CERAMICS, 1992, 31 (11): : 959 - 963
  • [24] Study of the Structure and Properties of Functional Coatings from Composite Powders of the Aluminum–Silicon Nitride System Additionally Reinforced with a Sialon Type Phase
    T. I. Bobkova
    A. I. Dmitryuk
    E. A. Nezhensky
    N. A. Lukyanova
    Inorganic Materials: Applied Research, 2022, 13 : 1562 - 1568
  • [25] Study of the Structure and Properties of Functional Coatings from Composite Powders of the Aluminum-Silicon Nitride System Additionally Reinforced with a Sialon Type Phase
    Bobkova, T. I.
    Dmitryuk, A. I.
    Nezhensky, E. A.
    Lukyanova, N. A.
    INORGANIC MATERIALS-APPLIED RESEARCH, 2022, 13 (06) : 1562 - 1568
  • [26] Effect of surface treatment with concentrated energy fluxes on the properties of composite materials based on silicon carbide and coatings made from such composites
    Grigor'ev, ON
    Podchernyaeva, IA
    Neshpor, IP
    Panasyuk, AD
    Umanskii, AP
    Lyudvinskaya, TA
    Shcherbina, OD
    POWDER METALLURGY AND METAL CERAMICS, 2005, 44 (7-8) : 382 - 388
  • [27] Effect of Surface Treatment with Concentrated Energy Fluxes on the Properties of Composite Materials Based on Silicon Carbide and Coatings Made from Such Composites
    O. N. Grigor'ev
    I. A. Podchernyaeva
    I. P. Neshpor
    A. D. Panasyuk
    A. P. Umanskii
    T. A. Lyudvinskaya
    O. D. Shcherbina
    Powder Metallurgy and Metal Ceramics, 2005, 44 : 382 - 388
  • [28] Innovative design of a dynamic prosthetic foot made from polypropylene/cow bones/silicon composite materials. Simulation and performance evaluation
    Al-Arakaki, Rasool R. K.
    Ameen, Sameer Hashim
    Saeed, Raad Abdul Ameer
    Al-Obaidi, Mudhar A.
    AUSTRALIAN JOURNAL OF MECHANICAL ENGINEERING, 2024,
  • [29] COMPOSITE-MATERIALS MADE FROM A POROUS 2D-CARBON-CARBON PREFORM DENSIFIED WITH BORON-NITRIDE BY CHEMICAL VAPOR INFILTRATION
    HANNACHE, H
    QUENISSET, JM
    NASLAIN, R
    HERAUD, L
    JOURNAL OF MATERIALS SCIENCE, 1984, 19 (01) : 202 - 212
  • [30] Structure and properties of the superelastic and hard carbon particles reinforcing wear-resistant composite materials obtained from mixtures of iron and fullerene powders under pressure
    O. P. Chernogorova
    E. I. Drozdova
    V. M. Blinov
    N. A. Bul’enkov
    Nanotechnologies in Russia, 2008, 3 (5-6): : 344 - 351
1234