An analysis of the conditions during the autonomous start-up of a water ram

被引：0
|
作者：
WOJCIECH SOBIESKI
SEWERYN LIPIŃSKI
DARIUSZ GRYGO
机构：
[1] University of Warmia and Mazury in Olsztyn,Department of Mechanics and Basics of Machine Construction, Faculty of Technical Sciences
[2] University of Warmia and Mazury in Olsztyn,Department of Electric and Power Engineering, Electronics and Automation, Faculty of Technical Sciences
来源：
Sādhanā | 2020年 / 45卷
关键词：
Water ram start-up; hydraulic ram; water ram pump;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The article presents the results of experimental studies investigating the conditions during the filling and start-up of a water ram based on changes in pressure in the working zone and the pressure zone. The test stand is described, and measurements are conducted in three configurations: (a) when the system is filled with water (with the delivery pipe empty); (b) when the water ram is manually activated (with the delivery pipe empty) and (c) when the water ram is activated after a manually induced break in water supply (with the delivery pipe filled with water). The results of the study indicate that the operation of the ram pump will be automatically resumed in every configuration, provided that the delivery pipe is filled with water to the appropriate height. The aim of this study was to describe new applications for a water ram, in particular under varied supply conditions.
引用
收藏
相关论文
共 50 条
  • [31] Factors Affecting Start-up Behavior and Start-up Performance During the COVID-19 Pandemic in Indonesia
    Pramono, Cristoper Allen
    Manurung, Adler Haymans
    Heriyati, Pantri
    Kosasih, Wibowo
    JOURNAL OF ASIAN FINANCE ECONOMICS AND BUSINESS, 2021, 8 (04): : 809 - 817
  • [32] Influence of start-up modes on the noise characteristics of mixed-flow pump during start-up process
    Zhu, Guojun
    Xuan, Yifan
    Feng, Jianjun
    Tang, Zhenbo
    Li, Yunzhe
    Wang, Like
    MECHANICAL SYSTEMS AND SIGNAL PROCESSING, 2024, 214
  • [33] Analysis on HVDC Start-up in System Black-start
    Xu, Guanghu
    Tu, Liang
    Lan, Haiwen
    Xia, Chengjun
    2015 5TH INTERNATIONAL CONFERENCE ON ELECTRIC UTILITY DEREGULATION AND RESTRUCTURING AND POWER TECHNOLOGIES (DRPT 2015), 2015, : 1705 - 1709
  • [34] Transient thermoelastohydrodynamic analysis for safe operating conditions of a tilting-pad journal bearing during start-up
    Monmousseau, P
    Fillon, M
    TRIBOLOGY INTERNATIONAL, 2000, 33 (3-4) : 225 - 231
  • [35] Pressure-heat release measurements during start-up conditions in a pulse combustor
    Dawson, JR
    Rodriguez-Martinez, VM
    Beale, AJ
    O'Doherty, T
    PROCEEDINGS OF THE COMBUSTION INSTITUTE, 2005, 30 : 1815 - 1822
  • [36] Effects of Surface Roughness on Transient Performance of Water Lubricated Bearings During Start-Up under Different Working Conditions
    Cao Y.-Z.
    Liang P.
    Guo F.
    Zhang X.-H.
    Wang C.
    Jiang F.-L.
    Tuijin Jishu/Journal of Propulsion Technology, 2022, 43 (07):
  • [37] START-UP OF DISTILLATION COLUMN BASED ON A SIMPLE START-UP ALGORITHM
    YASUOKA, H
    HIRATA, K
    NAKANISHI, E
    KUNUGITA, E
    KAGAKU KOGAKU RONBUNSHU, 1988, 14 (02) : 249 - 252
  • [38] Transient analysis of the start-up of a water heat pipe from a frozen state
    Tournier, Jean-Michel
    El-Genk, Mohamed S.
    Numerical Heat Transfer; Part A: Applications, 1995, 28 (04): : 461 - 486
  • [39] APPROXIMATE ANALYSIS OF REACTOR START-UP INCIDENTS
    HURWITZ, H
    NUCLEAR SCIENCE AND ENGINEERING, 1959, 6 (01) : 11 - 17
  • [40] ANALYSIS OF FINANCING SOURCES FOR START-UP COMPANIES
    Calopa, Marina Klacmer
    Horvat, Jelena
    Lalic, Maja
    MANAGEMENT-JOURNAL OF CONTEMPORARY MANAGEMENT ISSUES, 2014, 19 (02) : 19 - 43
12345