Disintegrative Action of Grinding Bodies in a Horizontal Planetary Mill with External and Internal Drum Rolling

被引：0
|
作者：
P. E. Vaitekhovich
D. N. Borovskii
机构：
[1] Belarusian State Technological University (Belorusskii Gosudarstvennyi Tekhnologicheskii Universitet),
来源：
Chemical and Petroleum Engineering | 2019年 / 55卷
关键词：
planetary mill; grinding body; disintegration; grinding zone; force; angular speed; collision; abrasion; crushing; ultimate strength;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
Methods for calculating the disintegrating capacity of grinding bodies in a horizontal planetary mill with external and internal rolling of drums for the main types of stress, such as compression, collision, and abrasion are described. A quantitative assessment is made of the disintegrative action of grinding bodies on the material being ground. For the disintegrating stresses generated in the planetary mill, the maximum values at the typical points of the load segment are calculated. The calculation results for various angular speeds of the grinding drum are given. It is established that in all types of loading the disintegrating stresses do not exceed the ultimate strength of the material.
引用
收藏
页码：87 / 93
页数：6
相关论文
共 8 条
  • [1] Disintegrative Action of Grinding Bodies in a Horizontal Planetary Mill with External and Internal Drum Rolling
    Vaitekhovich, P. E.
    Borovskii, D. N.
    [J]. CHEMICAL AND PETROLEUM ENGINEERING, 2019, 55 (1-2) : 87 - 93
  • [2] Motion of Grinding Bodies after Their Separation from the Surface of a Drum of a Planetary Mill
    P. E. Vaitekhovich
    G. M. Khves’ko
    D. V. Semenenko
    [J]. Theoretical Foundations of Chemical Engineering, 2005, 39 : 313 - 315
  • [3] Motion of grinding bodies after their separation from the surface of a drum of a planetary mill
    Vaitekhovich, PE
    Khves'ko, GM
    Semenenko, DV
    [J]. THEORETICAL FOUNDATIONS OF CHEMICAL ENGINEERING, 2005, 39 (03) : 313 - 315
  • [4] CHARACTERISTIC FEATURES OF THE MOVEMENT OF GRINDING CHARGES IN PLANETARY MILLS WITH EXTERNAL ROLLING
    Vaitekhovich, P. E.
    Semenenko, D. V.
    [J]. CHEMICAL AND PETROLEUM ENGINEERING, 2005, 41 (7-8) : 360 - 362
  • [5] Influence of ball size distribution on grinding effect in horizontal planetary ball mill
    Zhang, Jiaguan
    Bai, Yang
    Dong, Hai
    Wu, Qiong
    Ye, Xuchu
    [J]. ADVANCED POWDER TECHNOLOGY, 2014, 25 (03) : 983 - 990
  • [6] Effect of rotation method of internal blade and external cylinder on media particles and grinding characteristics in horizontal type sand mill
    Teshiba, T
    Takao, M
    Komori, S
    Murakami, Y
    Yoshida, H
    [J]. KAGAKU KOGAKU RONBUNSHU, 1996, 22 (03) : 597 - 602
  • [7] Analysis of dynamic similarity and energy-saving mechanism of the grinding process in a horizontal planetary ball mill
    Ye, Xuchu
    Bai, Yang
    Chen, Chuanhui
    Cai, Xuelin
    Fang, Jianqiang
    [J]. ADVANCED POWDER TECHNOLOGY, 2015, 26 (02) : 409 - 414
  • [8] The Effects of Rotation and Revolution Speed Ratio on the Grinding Kinetics of Cement Clinker in Horizontal Planetary Ball Mill
    Qian, Haiyan
    Kong, Qinggang
    Chen, Jinshi
    [J]. ADVANCES IN TEXTILE ENGINEERING AND MATERIALS III, PTS 1 AND 2, 2013, 821-822 : 1394 - +
1