Fracture Mechanics Assessment of Beam-to-Column Joints Subjected to Cyclic and Dynamic Loading

被引:0
|
作者
F. Minami
M. Ohata
机构
[1] Osaka University,Division of Materials and Manufacturing Science
关键词
COD; Dynamic loading; Earthquakes; Evaluation; Fatigue loading; Fracture mechanics; Fracture toughness; Girders; Loading; Mechanical properties; Reference lists; Strain; Structural members; Toughness;
D O I
10.1007/BF03266570
中图分类号
学科分类号
摘要
With a lesson learned from the Kobe Great Earthquake, an engineering method, WES 2808, has been developed in Japan for evaluating the structural integrity under the seismic condition. This paper presents a method for fracture mechanics assessment of beam-to-column joints subjected to cyclic and dynamic loading on the basis of WES 2808. WES 2808 includes two key ideas. One is a reference temperature concept for fracture toughness evaluation. The material fracture toughness under the seismic condition is replaced by the static fracture toughness without pre-strain at a reference temperature of T−ΔTpd, where T and ΔTpd are the service temperature and the temperature shift of the fracture toughness by pre-strain and dynamic loading, respectively. ΔTpd is given as a function of the flow stress elevation in the seismic condition. Another idea is a correction of constraint loss in structural components. A large amount of plastic deformation causes a loss of plastic constraint in structural components. In order to account for the constraint loss in the fracture assessment of components, the equivalent CTOD ratio β = δ3p / δStruc. is implemented, where δ3p and δStruc. are CTODs of the fracture toughness specimen and the structural component, respectively, at the same level of the Weibull stress.
引用
收藏
页码:22 / 33
页数:11
相关论文
共 50 条
  • [21] Retrofitting heat-damaged non-ductile RC beam-to-column joints subjected to cyclic and axial loading with FRCM composites
    Murad, Yasmin Zuhair
    JOURNAL OF BUILDING ENGINEERING, 2022, 48
  • [22] Cyclic behaviour of steel beam-to-column joints with a concrete slab
    Castiglioni, CA
    Bernuzzi, C
    Calado, L
    BEHAVIOUR OF STEEL STRUCTURES IN SEISMIC AREAS, 2000, : 147 - +
  • [23] Cyclic tests of double-sided beam-to-column joints
    Dubina, D
    Ciutina, A
    Stratan, A
    JOURNAL OF STRUCTURAL ENGINEERING, 2001, 127 (02) : 129 - 136
  • [24] Experimental behaviour of extended end-plate composite beam-to-column joints subjected to reversal of loading
    Hu, Xiamin
    Zheng, Desheng
    Yang, Li
    STRUCTURAL ENGINEERING AND MECHANICS, 2006, 24 (03) : 307 - 321
  • [25] Modeling reinforced-concrete beam-column joints subjected to cyclic loading
    Lowes, LN
    Altoontash, A
    JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 2003, 129 (12): : 1686 - 1697
  • [26] Cyclic behaviour of beam-to-column joints with cast steel connectors
    Tong, Lewei
    Chen, Yingzhi
    Chen, Yiyi
    Fang, Cheng
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2016, 116 : 114 - 130
  • [27] Strength deterioration of reinforced concrete beam-column joints subjected to cyclic loading
    Lee, Jung-Yoon
    Kim, Jin-Young
    Oh, Gi-Jong
    ENGINEERING STRUCTURES, 2009, 31 (09) : 2070 - 2085
  • [28] Modelling of beam-to-column joints
    Huber, G
    Tschemmernegg, F
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 1998, 45 (02) : 199 - 216
  • [29] Experimental investigation of prefabricated beam-to-column steel joints for precast concrete structures under cyclic loading
    Li, Zuohua
    Qi, Yihe
    Teng, Jun
    ENGINEERING STRUCTURES, 2020, 209
  • [30] DEVELOPMENT OF FRACTURE MECHANICS MODEL OF BEAM RETROFITTED WITH CFRP PLATE SUBJECTED TO CYCLIC LOADING
    Shahbazpanahi, Shahriar
    Ali, Hunar Farid Hama
    JOURNAL OF MECHANICS OF MATERIALS AND STRUCTURES, 2019, 14 (03) : 413 - 427