French round-robin test of X-ray stress determination on a shot-peened steel

被引：0
|
作者：
M. François
F. Convert
S. Branchu
机构：
[1] LAMM/CRTT,LAMM/CRTT
[2] Bd de l'Université,undefined
[3] CETIM,undefined
[4] Bd de l'Université,undefined
来源：
Experimental Mechanics | 2000年 / 40卷
关键词：
Residual stresses; X-ray analysis; uncertainty analysis; interlaboratory measurements;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A round-robin test of X-ray residual stress determination was performed by the Groupement Français d'Analyse des Contraintes and involved 16 laboratories. The standard deviation of the measurements was about 36 MPa, but a posttreatment of the raw data with the same soft-ware reduced the dispersion to 19 MPa. Analysis of the uncertainty sources (goniometer alignment, operator, counting statistics, nonlinearity of the material, etc.) revealed that the main sources come from the data treatment and the operator.
引用
收藏
页码：361 / 368
页数：7
相关论文
共 50 条
  • [1] French round-robin test of X-ray stress determination on a shot-peened steel
    Francois, M
    Convert, F
    Branchu, S
    EXPERIMENTAL MECHANICS, 2000, 40 (04) : 361 - 368
  • [2] Round Robin Study on Residual Stresses Using X-Ray Diffraction for Shot-Peened Tool Steel Specimens
    Holmberg, Jonas
    Palosaari, Mikko
    Hosseini, Seyed
    Larjosuo, Henri
    Andersson, Par
    RESIDUAL STRESSES 2018, ECRS-10, 2018, 6 : 51 - 56
  • [3] Round-robin test for X-ray stress analysis standards:: optimization for discrepancy reduction
    Ferreira, C.
    Francois, M.
    Guillen, R.
    JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN, 2008, 43 (01): : 67 - 74
  • [4] X-RAY DIFFRACTION STUDY OF RESIDUAL MACROSTRESSES IN SHOT-PEENED AND FATIGUED 4130 STEEL
    ESQUIVEL, AL
    EVANS, KR
    EXPERIMENTAL MECHANICS, 1968, 8 (11) : 496 - &
  • [5] Surface Layer Investigation of a Shot-Peened Duplex Stainless Steel Utilizing X-ray Diffraction
    Feng, Qiang
    Wu, Xueyan
    Jiang, Chuanhai
    Xu, Zhou
    Wu, Lihong
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2013, 22 (07) : 2005 - 2011
  • [6] Surface Layer Investigation of a Shot-Peened Duplex Stainless Steel Utilizing X-ray Diffraction
    Qiang Feng
    Xueyan Wu
    Chuanhai Jiang
    Zhou Xu
    Lihong Wu
    Journal of Materials Engineering and Performance, 2013, 22 : 2005 - 2011
  • [7] High-energy X-ray synchrotron radiation analysis of residual-stress distribution of shot-peened steel
    Tanaka, K
    Akiniwa, Y
    Suzuki, K
    Yanase, E
    Nishio, K
    Kusumi, Y
    Arai, K
    ECRS 6: PROCEEDINGS OF THE 6TH EUROPEAN CONFERENCE ON RESIDUAL STRESSES, 2002, 404-7 : 341 - 346
  • [8] Round robin test on the determination of residual stress depth distributions by X-ray diffraction
    Gibmeier, J
    Lu, J
    Scholtes, B
    ECRS 6: PROCEEDINGS OF THE 6TH EUROPEAN CONFERENCE ON RESIDUAL STRESSES, 2002, 404-7 : 659 - 664
  • [9] Residual Stress Measurement of Shot-Peened Steel Rings by Barkhausen Noise, ESPI Hole-Drilling and X-Ray Diffraction
    Rickert, Theo J.
    Thomas, James J.
    Suominen, Lasse
    RESIDUAL STRESSES IX, 2014, 996 : 380 - +
  • [10] Stress releasing procedure approach for an X-ray mirror holder for round-robin measurements
    Schmidtchen, S.
    Vannoni, M.
    Martin, I. Freijo
    La Civita, D.
    Sinn, H.
    ADVANCES IN METROLOGY FOR X-RAY AND EUV OPTICS VIII, 2019, 11109
12345