Experimental study of convective heat transfer under arrays of impinging air jets from slots and circular holes

被引：0
|
作者：
M. Can
A. B. Etemog✓lu
A. Avci
机构：
[1] University of Uludag✓ Faculty of Engineering and Architecture Department of Mechanical Engineering,
[2] Görükle Campus TR-16059,undefined
[3] Bursa,undefined
[4] Turkey,undefined
来源：
Heat and Mass Transfer | 2002年 / 38卷
关键词：
Heat Transfer; Mass Flow; Heat Transfer Coefficient; Convective Heat; Convective Heat Transfer;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
 Impinging air jets are widely used in industry, for heating, cooling, drying, etc, because of the high heat transfer rates which is developed in the impingement region. To provide data for designers of industrial equipment, a large multi-nozzle rig was used to measure average heat transfer coefficients under arrays of both slot nozzles and circular holes. The aim of the present paper is to develop the relationship between heat transfer coefficient, air mass flow and fan power which is required for the optimum design of nozzle systems. The optimum free area was obtained directly from experimental results. The theory of optimum free area was analysed and good agreement was found between theoretical and experimental results. It was also possible to optimise the variables, to achieve minimum capital and running costs.
引用
收藏
页码：251 / 259
页数：8
相关论文
共 50 条
  • [21] Convective heat transfer from a spherical concave surface due to swirling impinging jets issuing from a circular pipe
    Ahmed, Zahir U.
    Sharif, Muhammad A. . R.
    Al Nahian, Nahid
    [J]. APPLIED THERMAL ENGINEERING, 2024, 236
  • [22] EFFECT OF JET-JET SPACING ON CONVECTIVE HEAT-TRANSFER TO CONFINED, IMPINGING ARRAYS OF AXISYMMETRICAL AIR-JETS
    HUBER, AM
    VISKANTA, R
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1994, 37 (18) : 2859 - 2869
  • [23] On the numerical-experimental analysis and scaling of convective heat transfer to pulsating impinging jets
    Alimohammadi, Sajad
    Murray, Darina B.
    Persoons, Tim
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2015, 98 : 296 - 311
  • [24] CONVECTIVE HEAT-TRANSFER TO A CONFINED IMPINGING ARRAY OF AIR-JETS WITH SPENT AIR EXITS
    HUBER, AM
    VISKANTA, R
    [J]. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 1994, 116 (03): : 570 - 576
  • [25] Measurements of local heat transfer coefficients from a flat plate to a pair of circular air impinging jets
    Yan, XJ
    Saniei, N
    [J]. EXPERIMENTAL HEAT TRANSFER, 1996, 9 (01) : 29 - 47
  • [26] Convective heat transfer by a row of jets impinging on a concave surface
    Imbriale, Michele
    Ianiro, Andrea
    Meola, Carosena
    Cardone, Gennaro
    [J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2014, 75 : 153 - 163
  • [27] Effect of the grid geometry on the convective heat transfer of impinging jets
    Cafiero, Gioacchino
    Castrillo, Giusy
    Greco, Carlo Salvatore
    Astarita, Tommaso
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2017, 104 : 39 - 50
  • [28] Heat transfer distribution of impinging flame and air jets - A comparative study
    Madam, Anil R.
    Tajik, Abdul Raouf
    Hindasageri, Vijaykumar
    [J]. APPLIED THERMAL ENGINEERING, 2016, 92 : 42 - 49
  • [29] Convective heat transfer by a row of confined air jets from round holes equipped with triangular tabs
    Yu, Ye-zheng
    Zhang, Jing-zhou
    Xu, Hua-sheng
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2014, 72 : 222 - 233
  • [30] Experimental and Numerical Investigation of Heat Transfer Characteristics of Inline and Staggered Arrays of Impinging Jets
    Xing, Yunfei
    Spring, Sebastian
    Weigand, Bernhard
    [J]. JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2010, 132 (09): : 1 - 11
12345