Prediction of Martensite Start Temperature in Alloy Steels with Different Grain Sizes

被引：0
|
作者：
Seok-Jae Lee
Kyong-Su Park
机构：
[1] Chonbuk National University,Division of Advanced Materials Engineering
[2] POSCO,Next Generation Products Research Group, Technical Research Laboratories
来源：
Metallurgical and Materials Transactions A | 2013年 / 44卷
关键词：
Austenite; Martensite; Martensite Transformation; Alloy Steel; Thermodynamic Calculation;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
A new equation to predict the martensite start (Ms) temperature was proposed considering the effects of the chemical composition and grain size of austenite in alloy steels. The calculation results demonstrated that the addition of an alloying element decreased the Ms temperature, and austenite with smaller grain sizes resulted in a remarkable reduction of the Ms temperature. The variation of the Ms temperature calculated by the proposed equation was in good agreement with experimental data of alloy steels with various grain sizes.
引用
收藏
页码：3423 / 3427
页数：4
相关论文
共 50 条
  • [41] Quantum-mechanical analysis of effect of alloying elements on ε-martensite start temperature of steels
    Jang, J. H.
    Moon, J.
    Ha, H. -Y.
    Lee, T. -H.
    Suh, D. -W.
    SCIENTIFIC REPORTS, 2017, 7
  • [42] AN EXPLANATION OF THE MARTENSITE START MARTENSITE FINISH TEMPERATURE INTERVAL
    OKAZAKI, A
    LOWDE, RD
    SOLID STATE COMMUNICATIONS, 1982, 43 (07) : 503 - 506
  • [43] New Equation for Prediction of Martensite Start Temperature in High Carbon Ferrous Alloys
    Park, Jihye
    Shim, Jae-Hyeok
    Lee, Seok-Jae
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2018, 49A (02): : 450 - 454
  • [44] New Equation for Prediction of Martensite Start Temperature in High Carbon Ferrous Alloys
    Jihye Park
    Jae-Hyeok Shim
    Seok-Jae Lee
    Metallurgical and Materials Transactions A, 2018, 49 : 450 - 454
  • [45] Prediction of martensite start temperature of steel combined with expert experience and machine learning
    Liu, Chengcheng
    Su, Hang
    SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, 2024, 25 (01)
  • [46] A measurement of ultrasonic attenuation coefficient by frequency response in steels with different grain sizes
    Kim, KC
    TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2003, 26 (04) : 389 - 402
  • [47] ON THE MARTENSITE START TEMPERATURE-MS
    HORNBOGEN, E
    ZEITSCHRIFT FUR METALLKUNDE, 1984, 75 (10): : 741 - 746
  • [48] Martensite start temperature as a weldability index
    Olson, DL
    Liu, S
    Wang, W
    Pieters, RRGM
    Ibarra, S
    TRENDS IN WELDING RESEARCH, 1996, : 615 - 620
  • [49] THE INFLUENCE OF NITROGEN ON MARTENSITE START TEMPERATURE
    LESAGE, J
    HEAT TREATMENT OF METALS, 1990, 17 (03): : 73 - 76
  • [50] Enhanced strength and toughness in 40CrNiMo steels by austempering below martensite start temperature
    Xiao-xiao Liu
    Zheng Zhang
    Jie Zhang
    Ran Yang
    Cheng-shuang Yu
    Jun-wei Qiao
    Li-na Han
    Journal of Iron and Steel Research International, 2022, 29 : 810 - 818
12345