Improving the Electron-Beam Additive Manufacturing Growth of Components

被引：2

作者：

Trushnikov D.N. ^{[1
]}

Permyakov G.L. ^{[1
]}

Varushkin S.V. ^{[1
]}

Davlyatshin R.V. ^{[1
]}

Bayandin Y.V. ^{[2
]}

Pang S. ^{[3
]}

机构：

[1] Perm National Research Polytechnic University, Perm

[2] Institute of Continuous Media Mechanics, Ural Branch, Russian Academy of Sciences, Perm

[3] Huazhong University of Science and Technology, Wuhan

来源：

Russian Engineering Research | 2021年 / 41卷 / 09期

基金：

俄罗斯基础研究基金会;

关键词：

additive technology; electron-beam surfacing; heat and mass transfer; numerical modeling; smoothed particle hydrodynamics (SPH);

D O I：

10.3103/S1068798X21090276

中图分类号：

学科分类号：

摘要：

Abstract: Vertical supply of a wire in surfacing by two electron beams is proposed as a process for three-dimensional product growth. The numerical modeling of this process is outlined. In this approach, the product’s properties do not depend on the direction of growth; heating is uniform, with no shadowed areas; the process is flexible; and the heat supply to the metal may be regulated. © 2021, Allerton Press, Inc.

引用

页码：874 / 876

页数：2

共 50 条

[31] Controlling the Wire Position in Additive Electron-Beam Surfacing
D. N. Trushnikov
S. V. Varushkin
V. Ya. Belenkiy
I. A. Zubko
S. Pang
[J]. Russian Engineering Research, 2022, 42 : 1054 - 1057
[32] Three-dimensional additive electron-beam lithography
Koops, HWP
Weber, M
Schossler, C
Kaja, A
[J]. METAL/NONMETAL MICROSYSTEMS: PHYSICS, TECHNOLOGY, AND APPLICATIONS, 1996, 2780 : 388 - 395
[33] Controlling the Wire Position in Additive Electron-Beam Surfacing
Trushnikov D.N.
Varushkin S.V.
Belenkiy V.Y.
Zubko I.A.
Pang S.
[J]. Russian Engineering Research, 2022, 42 (10) : 1054 - 1057
[34] The Peculiarities of Hydrogen Embrittlement of Nb-Alloyed Stainless Steel Fabricated by Electron-Beam Additive Manufacturing
Panchenko, Marina Yu
Maier, Galina G.
Melnikov, Evgenii, V
Moskvina, Valentina A.
Reunova, Kseniya A.
Astafurov, Sergey, V
Rubtsov, Valery E.
Kolubaev, Evgenii A.
Astafurova, Elena G.
[J]. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY, 2020, 2310
[35] Thermal Imaging for Assessment of Electron-Beam Freeform Fabrication (EBF3) Additive Manufacturing Deposits
Zalameda, Joseph N.
Burke, Eric R.
Hafley, Robert A.
Taminger, Karen M. B.
Domack, Christopher S.
Brewer, Amy
Martin, Richard E.
[J]. THERMOSENSE: THERMAL INFRARED APPLICATIONS XXXV, 2013, 8705
[36] Elastic modulus and hardness of Ti alloy obtained by wire-feed electron-beam additive manufacturing
Klimenov, Vasiliy
Kolubaev, Evgeny
Han, Zeli
Chumaevskii, Andrey
Dvilis, Edgar
Strelkova, Irina
Drobyaz, Ekaterina
Yaremenko, Oleg
Kuranov, Aleksandr
[J]. OBRABOTKA METALLOV-METAL WORKING AND MATERIAL SCIENCE, 2023, 25 (04): : 180 - 196
[37] To the Method of Manufacturing Filaments for Electron-Beam Additive Technology from Casting and Hardly Deformable Metallic Materials
Fortuna, S., V
Gurianov, D. A.
Sokolov, P. S.
Fortuna, A. S.
[J]. PROCEEDINGS OF THE INTERNATIONAL CONFERENCE ON PHYSICAL MESOMECHANICS. MATERIALS WITH MULTILEVEL HIERARCHICAL STRUCTURE AND INTELLIGENT MANUFACTURING TECHNOLOGY, 2020, 2310
[38] Characterization of titanium aluminide alloy components fabricated by additive manufacturing using electron beam melting
Murr, L. E.
Gaytan, S. M.
Ceylan, A.
Martinez, E.
Martinez, J. L.
Hernandez, D. H.
Machado, B. I.
Ramirez, D. A.
Medina, F.
Collins, S.
Wicker, R. B.
[J]. ACTA MATERIALIA, 2010, 58 (05) : 1887 - 1894
[39] Application of electron-beam lithography in manufacturing of magnetic heads
Kurokawa, M
Yamada, A
[J]. JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2003, 21 (01): : 6 - 10
[40] APPLICATION OF ELECTRON-BEAM RADIATION TECHNOLOGY IN TIRE MANUFACTURING
MOHAMMED, SAH
WALKER, J
[J]. RUBBER CHEMISTRY AND TECHNOLOGY, 1986, 59 (03): : 482 - 496

← 1 2 3 4 5 →