Calculated phase diagrams, iron tolerance limits, and corrosion of Mg-Al alloys

被引：0
|
作者：
Ming Liu
Peter J. Uggowitzer
Patrik Schmutz
Andrej Atrens
机构：
[1] The University of Queensland,Division of Materials, ARC CoE for Design in Light Metals
[2] Swiss Federal Laboratories for Materials Science and Technology,Department of Materials
[3] Swiss Federal Laboratories for Materials Science and Technology in Dubendorf,undefined
[4] ETH Zurich,undefined
来源：
JOM | 2008年 / 60卷
关键词：
Corrosion Rate; Magnesium Alloy; Stress Corrosion Crack; Tolerance Limit; Salt Spray;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The factors determining corrosion are reviewed in this paper, with an emphasis on iron tolerance limit and the production of high-purity castings. To understand the iron impurity tolerance limit, magnesium phase diagrams were calculated using the Pandat software package. Calculated phase diagrams can explain the iron tolerance limit and the production of high-purity castings by means of control of melt conditions; this is significant for the production of quality castings from recycled magnesium. Based on the new insight, the influence of the microstructure on corrosion of magnesium alloys is reviewed.
引用
收藏
页码：39 / 44
页数：5
相关论文
共 50 条
  • [31] Electrochemical corrosion behaviour of Mg-Al alloys with thermal spray Al/SiCp composite coatings
    Pardo, A.
    Feliu, S., Jr.
    Merino, M. C.
    Mohedano, M.
    Casajus, P.
    Arrabal, R.
    REVISTA DE METALURGIA, 2010, 46 (02) : 129 - 142
  • [32] Corrosion behaviour of Mg-Al alloys with Al-11Si thermal spray coatings
    Pardo, A.
    Merino, M. C.
    Casajus, P.
    Mohedano, M.
    Arrabal, R.
    Matykina, E.
    MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2009, 60 (12): : 939 - 948
  • [33] Effect of Al content on the corrosion behavior of Mg-Al alloys in aqueous solutions of different pH
    Abady, Ghada M.
    Hilal, Nadia H.
    El-Rabiee, Mohmmed
    Badawy, Waheed A.
    ELECTROCHIMICA ACTA, 2010, 55 (22) : 6651 - 6658
  • [34] Commensurately modulated stable states related to the γ phase in Mg-Al alloys
    Donnadieu, P
    Harmelin, MG
    Seifert, HJ
    Aldinger, F
    PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 1998, 78 (04): : 893 - 905
  • [35] Effect of iron on grain refinement of high-purity Mg-Al alloys
    Cao, P
    Qian, M
    StJohn, DH
    SCRIPTA MATERIALIA, 2004, 51 (02) : 125 - 129
  • [36] Mg fragments and Al bonded networks in liquid Mg-Al alloys
    Wang, Jin
    Li, Xinxin
    Pan, Shaopeng
    Qin, Jingyu
    COMPUTATIONAL MATERIALS SCIENCE, 2017, 129 : 115 - 122
  • [37] Corrosion behavior of sand-casted Mg-Al and Mg-Al-Zn alloys in salt spraying environment
    Asakawa, Yoshihiko
    Sato, Fumihiro
    Nakayama, Takenori
    Satoh, Hiroshi
    Keikinzoku/Journal of Japan Institute of Light Metals, 1992, 42 (12): : 759 - 764
  • [38] Stress Corrosion Cracking (SCC) in Mg-Al alloys studied using compact specimens
    Winzer, Nick
    Atrens, Andrej
    Dietzel, Wolfgang
    Song, Guangling
    Kainer, Karl U.
    ADVANCED ENGINEERING MATERIALS, 2008, 10 (05) : 453 - 458
  • [39] INFLUENCE OF ALUMINUM CONTENT ON CORROSION RESISTANCE OF Mg-Al ALLOYS CONTAINING COPPER AND ZINC
    Kawabata, Hiroyuki
    Nishino, Naohisa
    Seguchi, Tsuyoshi
    Genma, Yoshikazu
    MAGNESIUM TECHNOLOGY 2012, 2012, : 277 - 280
  • [40] Corrosion Resistance of Superhydrophobic Mg-Al Layered Double Hydroxide Coatings on Aluminum Alloys
    Zhang, Fen
    Zhang, Chang-Lei
    Song, Liang
    Zeng, Rong-Chang
    Cui, Lan-Yue
    Cui, Hong-Zhi
    ACTA METALLURGICA SINICA-ENGLISH LETTERS, 2015, 28 (11) : 1373 - 1381
12345