Reaction mechanism on the smelting reduction of iron ore by solid carbon

被引:0
|
作者
Jae-Cheol Lee
Dong-Joon Min
Sung-Soo Kim
机构
[1] Research Institute of Industrial Science and Technology,the Process Metallurgy Research Team
[2] Yonsei University,the Department of Metallurgical Engineering
[3] Yeungnam University,the Department of Metallurgical Engineering
关键词
Foam; Material Transaction; Wustite; Graphite Crucible; Reduction Degree;
D O I
暂无
中图分类号
学科分类号
摘要
The kinetics of the smelting reduction of iron ore by a graphite crucible and carbon-saturated molten iron was investigated between 1400 °C and 1550 °C, and its reaction phenomena were continuously observed in situ by X-ray fluoroscopy. In the smelting reduction by graphite, it was shown from the observation results that the smelting reduction reaction proceeded by the following two stages: an initial quiet reduction without foaming (stage I) and a following highly active reduction with severe foaming (stage II). At 1500 °C, by the graphite crucible, the reduction rate of iron ore was found to be 8.88×10−5 mol/cm2 · s, and by the molten iron, 8.25×10−5 mol/cm2·s. The activation energies for the reduction by the graphite crucible and the molten iron were 24.1 and 22.9 kcal/mol, respectively. Based on the results of kinetic research and X-ray fluoroscopic observations, it can be concluded that these two types of smelting reduction reactions of iron ore by the graphite crucible and by the molten iron are essentially the same.
引用
收藏
页码:1019 / 1028
页数:9
相关论文
共 50 条
  • [31] Kinetic model for direct smelting reduction process of Huimin iron ore
    Fan, G. -F.
    Qing, S.
    Wang, H.
    Hong, W. -C.
    TRANSACTIONS OF THE INSTITUTIONS OF MINING AND METALLURGY SECTION C-MINERAL PROCESSING AND EXTRACTIVE METALLURGY, 2013, 122 (02): : 105 - 112
  • [32] Smelting reduction mechanism of Fe-O-S melts using solid carbon
    Kim, DH
    Choi, JK
    Lee, HG
    Kim, JS
    ISIJ INTERNATIONAL, 2001, 41 (09) : 955 - 964
  • [33] MECHANISM OF SMELTING REDUCTION OF CR2O3 PARTICLES BY SOLID CARBON
    SHIMOO, T
    SAKAI, Y
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1989, 53 (09) : 898 - 905
  • [34] Reaction Model and Reduction Behavior of Carbon Iron Ore Composite in Blast Furnace
    Ueda, Shigeru
    Yanagiya, Kazunari
    Watanabe, Kentaro
    Murakami, Taichi
    Inoue, Ryo
    Ariyama, Tatsuro
    ISIJ INTERNATIONAL, 2009, 49 (06) : 827 - 836
  • [35] Comparison of iron and chromium reduction from chrome ore concentrates by solid carbon and carbon monoxide
    Mukashev N.Z.
    Kosdauletov N.Y.
    Suleimen B.T.
    1600, Trans Tech Publications Ltd (299): : 1152 - 1157
  • [36] Smelting reduction of ilmenite by carbon in molten pig iron
    Ma, NY
    Warner, NA
    CANADIAN METALLURGICAL QUARTERLY, 1999, 38 (03) : 165 - 173
  • [37] Influence of Temperature on Reaction Mechanism of Ilmenite Ore Smelting for Titanium Production
    Dong Hyeon Kim
    Tae Sung Kim
    Jung Ho Heo
    Hyun Sik Park
    Joo Hyun Park
    Metallurgical and Materials Transactions B, 2019, 50 : 1830 - 1840
  • [38] SMELTING OF IRON OXYSULFIDE MELTS USING SOLID CARBON
    MURTHY, GGK
    ELLIOTT, JF
    ISIJ INTERNATIONAL, 1994, 34 (07) : 548 - 554
  • [39] Influence of Temperature on Reaction Mechanism of Ilmenite Ore Smelting for Titanium Production
    Kim, Dong Hyeon
    Kim, Tae Sung
    Heo, Jung Ho
    Park, Hyun Sik
    Park, Joo Hyun
    METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2019, 50 (04): : 1830 - 1840
  • [40] Kinetics of reduction of lead smelting slags with solid carbon
    Kinaev, NN
    Jak, E
    Hayes, PC
    SCANDINAVIAN JOURNAL OF METALLURGY, 2005, 34 (02) : 150 - 157