The effect of incorporation of steatite wastes on the mechanical properties of cementitious composites

被引:0
|
作者
K. Strecker
T. H. Panzera
A. L. R. Sabariz
J. S. Miranda
机构
[1] University of São João del-Rei (UFSJ),Mechanical Engineering Department (DEMEC)
来源
Materials and Structures | 2010年 / 43卷
关键词
Waste recycling; Cementitious composites; Mechanical properties; Full design of experiment;
D O I
暂无
中图分类号
学科分类号
摘要
The recycling of mineral wastes is considered today an activity of utmost importance, contributing in the diversification of products, reduction of final costs, besides promoting alternative raw materials for some industrial sectors. This work focuses on the incorporation of steatite wastes in cementitious composites. A full design of experiment was carried out in order to investigate the effect of the experimental factors: fraction and particle size of steatite and compaction pressures (10 and 30 MPa) on the mechanical properties of the ceramic composites. The increase of the steatite fraction provided an increase of the bulk density and apparent porosity of the composites. Large particles of steatite provided an increase of the apparent porosity decreasing the mechanical strength. The increase of the pressing compaction decreased the apparent porosity, increasing the bulk density and the mechanical strength of the composites.
引用
收藏
页码:923 / 932
页数:9
相关论文
共 50 条
  • [31] Effect of PVA Fiber on the Mechanical Properties of Seawater Coral Sand Engineered Cementitious Composites
    Han, Hongwei
    Gao, Gongwen
    Li, Yu
    Hou, Dongxu
    Han, Yudong
    MATERIALS, 2024, 17 (06)
  • [32] Effect of incorporation of microstructured carbonized cellulose on surface and mechanical properties of epoxy composites
    Bartoli, Mattia
    Rosso, Carlo
    Giorcelli, Mauro
    Rovere, Massimo
    Jagdale, Pravin
    Tagliaferro, Alberto
    Chae, Michael
    Bressler, David C.
    JOURNAL OF APPLIED POLYMER SCIENCE, 2020, 137 (27)
  • [33] Effect of incorporation of carbon nanotubes on the mechanical properties of epoxy-amine composites
    Raimondo, Marialuigia
    Guadagno, Liberata
    6TH INTERNATIONAL CONFERENCE ON TIMES OF POLYMERS (TOP) AND COMPOSITES, 2012, 1459 : 226 - 228
  • [34] Study of mechanical strength and strength to acid attack on cementitious composites with incorporation of silica nanoparticle
    Longo, Thainara
    de Camargo, Geovana Ferreira Nogueira
    Albertim, Michel Fernando
    Oliveira, Dayana Ruth Bola
    MATERIA-RIO DE JANEIRO, 2022, 27 (04):
  • [35] Dynamic mechanical properties of basalt fiber engineered cementitious composites
    Zhang N.
    Zhou J.
    Xu M.
    Li H.
    Ma G.
    Baozha Yu Chongji/Explosion and Shock Waves, 2020, 40 (05):
  • [36] Mechanical and thermal properties of green lightweight engineered cementitious composites
    Huang, Xiaoyan
    Ranade, Ravi
    Zhang, Qian
    Ni, Wen
    Li, Victor C.
    CONSTRUCTION AND BUILDING MATERIALS, 2013, 48 : 954 - 960
  • [37] Mechanical properties of high performance fiber reinforced cementitious composites
    Fakharifar, Mostafa
    Dalvand, Ahmad
    Arezoumandi, Mahdi
    Sharbatdar, Mohammad K.
    Chen, Genda
    Kheyroddin, Ali
    CONSTRUCTION AND BUILDING MATERIALS, 2014, 71 : 510 - 520
  • [38] Incorporation mode effect of Nano-silica on the rheological and mechanical properties of cementitious pastes and cement mortars
    Safi, B.
    Aknouche, H.
    Mechakra, H.
    Aboutaleb, D.
    Bouali, K.
    2ND INTERNATIONAL CONFERENCE ON SUSTAINABLE DEVELOPMENT IN CIVIL, URBAN AND TRANSPORTATION ENGINEERING (CUTE 2018), 2018, 143
  • [39] The influences of soft and stiff inclusions on the mechanical properties of cementitious composites
    Falzone, Gabriel
    Falla, Guillermo Puerta
    Wei, Zhenhua
    Zhao, Mingjie
    Kumar, Aditya
    Bauchy, Mathieu
    Neithalath, Narayanan
    Pilon, Laurent
    Sant, Gaurav
    CEMENT & CONCRETE COMPOSITES, 2016, 71 : 153 - 165
  • [40] Mechanical properties of engineered cementitious composites developed with silica fume
    Arivusudar, N.
    Babu, S. Suresh
    CEMENT WAPNO BETON, 2020, 25 (04): : 282 - 291