Fatigue strength and fracture behaviour of CHS-to-RHS T-joints subjected to out-of-plane bending

被引：0
|
作者：
Li-Chun Bian
Jae-Kyoo Lim
Yon Jig Kim
机构：
[1] Nanjing University of Technology Nanjing,College of Mechanical and Power Engineering
[2] Chonbuk National University,Department of Mechanical Design, Automobile Hi
来源：
KSME International Journal | 2003年 / 17卷
关键词：
Hollow Section; Welded Joint; Fatigue; Hot Spot Stress; Stress Concentration Factor;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The fatigue behaviour of six different hollow section T-joints subjected to out-of-plane bending moment was investigated experimentally using scaled steel models. The joints had circular brace members and rectangular chord members. Hot spot stresses and the stress concentration factors (SCFs) were determined experimentally. Fatigue testing was carried out under constant amplitude loading in air. The test results have been statistically evaluated, and show that the experimental SCF values for circular-to-rectangular (CHS-to-RHS) hollow section joints were found to be below those of circular-to-circular (CHS-to-CHS) hollow section joints. The fatigue strength, referred to experimental hot spot stress, was in reasonably good agreement with referred fatigue design codes for tubular joints.
引用
下载
收藏
页码：207 / 214
页数：7
相关论文
共 50 条
  • [1] Fatigue strength and fracture behaviour of CHS-to-RHS T-Joints subjected to out-of-plane bending
    Bian, LC
    Lim, JK
    Kim, YJ
    KSME INTERNATIONAL JOURNAL, 2003, 17 (02): : 207 - 214
  • [2] Fatigue strength and stress concentration factors of CHS-to-RHS T-joints
    Bian, LC
    Lim, JK
    JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2003, 59 (05) : 627 - 640
  • [3] Fatigue behaviour of welded thin CHS-plate T-joints under in-plane bending
    Mashiri, FR
    Zhao, XL
    Grundy, P
    TUBULAR STRUCTURES X, 2003, : 321 - 328
  • [4] Experimental and numerical studies on SCFs of SHS T-Joints subjected to static out-of-plane bending
    Matti, Feleb N.
    Mashiri, Fidelis R.
    THIN-WALLED STRUCTURES, 2020, 146
  • [5] Fatigue behaviour of welded thin cold-formed CHS-CHS T-joints under in-plane bending
    Mashiri, FR
    Zhao, XL
    Grundy, P
    TUBULAR STRUCTURES X, 2003, : 311 - 319
  • [6] Experimental study of fire effects on out-of-plane bending strength/flexibility of steel tubular T-joints
    Ahmadpour, F.
    Zeinoddini, M.
    Mo'tamedi, M.
    Rashnooie, R.
    STRUCTURES, 2021, 34 : 2174 - 2188
  • [7] Structural behavior of CHS T-joints subjected to brace in-plane bending at elevated temperatures
    Nguyen, M. P.
    Fung, T. C.
    Tan, K. H.
    TUBULAR STRUCTURES XIV, 2012, : 607 - 614
  • [8] Structural Behavior of CHS T-Joints Subjected to Static In-Plane Bending in Fire Conditions
    Fung, T. C.
    Tan, K. H.
    Nguyen, M. P.
    JOURNAL OF STRUCTURAL ENGINEERING, 2016, 142 (03)
  • [9] Experimental study on SCFs of empty SHS-SHS T-joints subjected to static out-of-plane bending
    Matti, F. N.
    Mashiri, F. R.
    STABILITY AND DUCTILITY OF STEEL STRUCTURES 2019, 2019, : 770 - 777
  • [10] Static Strength of RHS T-joints with Reinforced Chord under In-plane bending Load
    Yang Dong-Ping
    Shao Yong-bo
    Long Feng-Le
    Niu Geng-Qi
    Zhang Lu
    Zhi Jing-Bo
    MATERIALS SCIENCE, CIVIL ENGINEERING AND ARCHITECTURE SCIENCE, MECHANICAL ENGINEERING AND MANUFACTURING TECHNOLOGY, PTS 1 AND 2, 2014, 488-489 : 790 - +
12345