Near Optimal PID Controllers for the Biped Robot While Walking on Uneven Terrains

被引:15
|
作者
Mandava R.K. [1 ]
Vundavilli P.R. [1 ]
机构
[1] School of Mechanical Sciences, Indian Institute of Technology (IIT) Bhubaneswar, Bhubaneswar
关键词
Biped robot; modified chaotic invasive weed optimization (MCIWO) & particle swarm optimization (PSO) algorithm; proportion integration differentiation (PID) controller; sloping surface; staircase;
D O I
10.1007/s11633-018-1121-3
中图分类号
学科分类号
摘要
The execution of the gaits generated with the help of a gait planner is a crucial task in biped locomotion. This task is to be achieved with the help of a suitable torque based controller to ensure smooth walk of the biped robot. It is important to note that the success of the developed proportion integration differentiation (PID) controller depends on the selected gains of the controller. In the present study, an attempt is made to tune the gains of the PID controller for the biped robot ascending and descending the stair case and sloping surface with the help of two non-traditional optimization algorithms, namely modified chaotic invasive weed optimization (MCIWO) and particle swarm optimization (PSO) algorithms. Once the optimal PID controllers are developed, a simulation study has been conducted in computer for obtaining the optimal tuning parameters of the controller of the biped robot. Finally, the optimal gait angles obtained by using the best controller are fed to the real biped robot and found that the biped robot has successfully negotiated the said terrains. © 2018, Institute of Automation, Chinese Academy of Sciences and Springer-Verlag GmbH Germany, part of Springer Nature.
引用
收藏
页码:689 / 706
页数:17
相关论文
共 50 条
  • [41] Optimal Walking Gait Generator for Biped Robot Using Modified Jaya Optimization Technique
    Ho Pham Huy Anh
    Tran Thien Huan
    [J]. International Journal of Computational Intelligence Systems, 2020, 13 : 382 - 399
  • [42] Using bilateral symmetry of the biped robot mechanism for efficient and faster optimal gait learning on uneven terrain
    Jitendra Kumar
    Ashish Dutta
    [J]. International Journal of Intelligent Robotics and Applications, 2021, 5 : 429 - 464
  • [43] Using bilateral symmetry of the biped robot mechanism for efficient and faster optimal gait learning on uneven terrain
    Kumar, Jitendra
    Dutta, Ashish
    [J]. INTERNATIONAL JOURNAL OF INTELLIGENT ROBOTICS AND APPLICATIONS, 2021, 5 (04) : 429 - 464
  • [44] Design of Near-Optimal Trajectories for the Biped Robot Using MCIWO Algorithm
    Mandava, Ravi Kumar
    Vundavilli, Pandu R.
    [J]. SOFT COMPUTING FOR PROBLEM SOLVING, SOCPROS 2017, VOL 1, 2019, 816 : 355 - 364
  • [45] Compliant gait control method based on CVSLIP-FF model for biped robot walking over uneven terrain
    Xie, Sicheng
    Li, Xinyu
    Lu, Shengyu
    Li, Jingyuan
    Hu, Chenghao
    Gao, Liang
    [J]. ISA TRANSACTIONS, 2024, 146 : 1 - 15
  • [46] Performance Analysis of Biped Walking Robot with Circular Feet using Optimal Trajectory Planning Method
    Hase, Takamasa
    Huang, Qingjiu
    Chen, Xuedong
    [J]. 2008 IEEE INTERNATIONAL CONFERENCE ON ROBOTICS AND BIOMIMETICS, VOLS 1-4, 2009, : 143 - +
  • [47] A new method of optimal off-line trajectory planning with biped-walking robot
    Ji, J
    Ma, L
    Dai, S
    Zhang, Y
    [J]. PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON CLIMBING AND WALKING ROBOTS, CLAWAR 99, 1999, : 571 - 576
  • [48] Optimal Trajectory Generation for Walking Up and Down a Staircase with a Biped Robot Using Genetic Algorithm (GA)
    Kim, Eunsu
    Kim, Manseok
    Kim, Jong-Wook
    [J]. ADVANCES IN ROBOTICS, 2009, 5744 : 103 - 111
  • [49] Walking Stability Control Of Biped Robot Based on Three Mass With Angular Momentum Model Using Predictive PID Control
    Shamna, P.
    Priya, N.
    Ahamed, Sarfaraz K.
    [J]. 2017 INTERNATIONAL CONFERENCE OF ELECTRONICS, COMMUNICATION AND AEROSPACE TECHNOLOGY (ICECA), VOL 2, 2017, : 584 - 588
  • [50] Near-optimal gait generations of a two-legged robot on rough terrains using soft computing
    Vundavilli, Pandu Ranga
    Pratihar, Dilip Kumar
    [J]. ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2011, 27 (03) : 521 - 530