Investigation on contact parameters in cold rotary forging using a 3D FE method

被引：2

作者：

Xinghui Han

Lin Hua

机构：

[1] Wuhan University of Technology,School of Automotive Engineering, Hubei Key Laboratory of Advanced Technology of Automotive Parts

来源：

The International Journal of Advanced Manufacturing Technology | 2012年 / 62卷

关键词：

Cold rotary forging; Contact; FE simulation;

D O I：

暂无

中图分类号：

学科分类号：

摘要：

Cold rotary forging is an advanced but very complicated metal plastic forming technology with continuous local plastic deformation. Investigating the contact parameters between the contact interactions has a great importance to improve the contact performance. This paper is aimed to utilize the finite element (FE) method to study the contact parameters in a complex continuous local forming technology of cold rotary forging. For this purpose, a reasonable 3D elastic–plastic dynamic explicit FE model of cold rotary forging of 20CrMnTi alloy is developed using the FE software ABAQUS/Explicit. Based on this valid 3D FE model, some important contact parameters, such as the contact pressure, contact slip rate, contact slip distance, and contact force, are numerically examined in detail. The results of this research help to better understand the complicated contact mechanisms in cold rotary forging.

引用

页码：1087 / 1106

页数：19

共 50 条

[21] An Investigation into Forming of Gears Using Rotary Forging Process
Abd-Eltwab, Ayman Ali
Ayoub, Walid Elsyed
El-Sheikh, Mohamed N.
Saied, Essam Khalaf
Ghazaly, Nouby M.
Gomaa, A. A.
[J]. MANUFACTURING TECHNOLOGY, 2024, 24 (04):
[22] An Investigation of 3D Printing Parameters on Tensile Strength of PLA Using Response Surface Method
Tuncay, Mehmet Masum
[J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2024, 33 (12) : 6249 - 6258
[23] A Novel Cold Rotary Forging Method of Producing Multiple Racks Using One Set of Punch
Han, Xinghui
Hu, Yaxiong
Hua, Lin
[J]. JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2018, 140 (08):
[24] A 3D Contact Smoothing Method based on Quasi-C1 Interpolation and Normal voting-Application to 3D Forging and Rolling
Hachani, Maha
Fourment, Lionel
[J]. NUMIFORM 2010, VOLS 1 AND 2: DEDICATED TO PROFESSOR O. C. ZIENKIEWICZ (1921-2009), 2010, 1252 : 487 - 495
[25] 3D measuring and segmentation method for hot heavy forging
Du Zhengchun
Wu Zhaoyong
Yang Jianguo
[J]. MEASUREMENT, 2016, 85 : 43 - 53
[26] 3D FINITE ELEMENTS METHOD (FEM) ANALYSIS OF BASIC PROCESS PARAMETERS IN ROTARY PIERCING MILL
Pater, Z.
Bartnicki, J.
Kazanecki, J.
[J]. METALURGIJA, 2012, 51 (04): : 501 - 504
[27] Research on precision forging law of complicated blade by using 3D FE simulation and physical modeling
Zhan, M
Yang, H
Liu, YL
[J]. ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY, 2004, 471-472 : 839 - 843
[28] The Double Hierarchy Method. A parallel 3D contact method for the interaction of spherical particles with rigid FE boundaries using the DEM
Miquel Santasusana
Joaquín Irazábal
Eugenio Oñate
Josep Maria Carbonell
[J]. Computational Particle Mechanics, 2016, 3 : 407 - 428
[29] The Double Hierarchy Method. A parallel 3D contact method for the interaction of spherical particles with rigid FE boundaries using the DEM
Santasusana, Miquel
Irazabal, Joaquin
Onate, Eugenio
Carbonell, Josep Maria
[J]. COMPUTATIONAL PARTICLE MECHANICS, 2016, 3 (03) : 407 - 428
[30] TOOLING DESIGN IMPROVEMENT OF MULTISTAGE COLD FORGING OF SPECIALTY SHAPED NUTS USING CAE AND 3D PRINTING
Hsia, Shao-Yi
Chou, Yu-Tuan
[J]. TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2016, 40 (04) : 501 - 510

← 1 2 3 4 5 →