Trapping of agglomerated nanoparticles by the acoustic field: influence of particle diameter and density on the trap efficiency

Acoustic force field has been studied for its use in trapping submicron particulates of various sizes and densities. Both wave and fluid dynamics have been used to study the effect of various particulate sizes and densities. A numerical model was used to arrive at quantitative trap efficiency data for the combined size and density variations. The particles used in the present work are assumed to be agglomerations of nanoparticles (ANPs) produced via the vapour condensation route. The particles present in the domain have considerable porosity and their skeletal densities are very dissimilar to their respective bulk densities. The study has been done for acoustic waves of frequency 40 kHz. Particles of uniform sizes and densities are introduced into the acoustic force field in independent case studies, to obtain trap efficiency of the system. The work presented not only elaborates on the effects of size and density on the trap efficiency, but also estimates trap efficiency for any given size less than 1 mm and density less than 150 kg/m3\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$^3$$\end{document}. These studies provide quantitative data for employing this technique in various areas dealing with synthesis and collection of ANPs. The study helps in addressing the major problem of contamination due to conventional collection methods as a result of their contact with the synthesis chamber. It also provides theoretical estimate of the quantities that can be effectively trapped/collected. Detailed analysis of the acoustic forces on the ANPs present in the domain have been reported in the present work.