The influence of low-melting-point alloy on the rheological properties of a polystyrene melt

被引：0
|
作者：
Xiangwu Zhang
Yi Pan
Jianfeng Cheng
Xiaosu Yi
机构：
[1] Zhejiang University,Dept. of Polymer Science and Engineering
[2] Zhejiang University,Dept. of Polymer Science and Engineering
[3] National Key Laboratory of Advanced Composites,undefined
来源：
Journal of Materials Science | 2000年 / 35卷
关键词：
Polymer; Viscosity; Melting Point; Polystyrene; Rheological Property;
D O I：
暂无
中图分类号：
学科分类号：
摘要：
The rheological behavior of polystyrene melts filled with different loadings of Sn-Pb alloy has been studied. The filled polystyrene melts showed a pseudoplastic behavior, and the viscosity varied dramatically at the melting point of the alloy. The temperature dependence of the viscosity has been found to follow two separate Arrhenius equations for high and low temperatures, respectively. The presence of alloy filler was found to increase melt viscosity below the melting point of the alloy, but decreased it on reaching the alloy melting point. The melt elasticity was found to decrease with increase of alloy concentration, and increase abruptly at the alloy melting point. However, viscous flow was the dominant mechanism of deformation over the entire range of temperature studied.
引用
收藏
页码：4573 / 4581
页数：8
相关论文
共 50 条
  • [31] Ball Grid Array Interconnection Properties of Solderable Polymer-Solder Composites With Low-Melting-Point Alloy Fillers
    Yim, Byung-Seung
    Shin, Young-Eui
    Kim, Jong-Min
    JOURNAL OF ELECTRONIC PACKAGING, 2017, 139 (04)
  • [32] Low-melting-point alloy integration into puffed wood for improving mechanical and thermal properties of wood–metal functional composites
    Yuan Chai
    Shanqing Liang
    Yongdong Zhou
    Lanying Lin
    Feng Fu
    Wood Science and Technology, 2020, 54 : 637 - 649
  • [33] A Method to Fabricate Complex Structure for Variable Stiffness Manipulators Based on Low-Melting-Point Alloy
    Wang, Fengxu
    Xing, Zhiguang
    Wang, Xinbo
    Zhao, Jianwen
    2019 2ND IEEE INTERNATIONAL CONFERENCE ON SOFT ROBOTICS (ROBOSOFT 2019), 2019, : 491 - 495
  • [34] Preparation of Microencapsulated Low-Melting-Point Sn-Bi Alloy for Latent Heat Storage
    Zhu, Chunyu
    Liu, Renjie
    Lu, Jiahui
    Sheng, Nan
    ENERGY TECHNOLOGY, 2023, 11 (02)
  • [35] New encapsulation method using low-melting-point alloy for sealing micro heat pipes
    Li, Congming
    Wang, Xiaodong
    Zhou, Chuanpeng
    Luo, Yi
    Li, Zhixin
    Li, Sidi
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2017, 31 (06) : 2621 - 2626
  • [36] Effect of contact states in the tube on the push bending with low-melting-point alloy as filling medium
    Jie Xiao
    Xuefeng Xu
    Dunwen Zuo
    Shitian Wu
    Lin Huang
    The International Journal of Advanced Manufacturing Technology, 2022, 123 : 4277 - 4291
  • [37] Effect of contact states in the tube on the push bending with low-melting-point alloy as filling medium
    Xiao, Jie
    Xu, Xuefeng
    Zuo, Dunwen
    Wu, Shitian
    Huang, Lin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2022, 123 (11-12): : 4277 - 4291
  • [38] Variable Stiffness Actuator for Soft Robotics Using Dielectric Elastomer and Low-Melting-Point Alloy
    Shintake, Jun
    Schubert, Bryan
    Rosset, Samuel
    Shea, Herbert
    Floreano, Dario
    2015 IEEE/RSJ INTERNATIONAL CONFERENCE ON INTELLIGENT ROBOTS AND SYSTEMS (IROS), 2015, : 1097 - 1102
  • [39] New encapsulation method using low-melting-point alloy for sealing micro heat pipes
    Congming Li
    Xiaodong Wang
    Chuanpeng Zhou
    Yi Luo
    Zhixin Li
    Sidi Li
    Journal of Mechanical Science and Technology, 2017, 31 : 2621 - 2626
  • [40] Rapid thermal annealing of high-melting-point films on low-melting-point substrates
    Rosenberg, SE
    Wong, PY
    Miaoulis, IN
    IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 1996, 9 (02) : 249 - 256
12345