Wide-gap brazing of IN738 and the bonding strength using Ni-based filler metal powders

被引：2

作者：

Kim, Y. H. ^{[1
]}

Kim, I. H. ^{[2
]}

Kim, K. T. ^{[1
]}

Shin, S. Y. ^{[1
]}

机构：

[1] Korea Inst Ind Technol, Adv Funct Mat Team, 7-47 Songdo, Inchon 406800, South Korea

[2] Korea Inst Ind Technol, Adv Mat Div, Inchon 406-800, South Korea

来源：

MECHANICAL BEHAVIOR OF MATERIALS X, PTS 1AND 2 | 2007年 / 345-346卷

关键词：

wide-gap brazing; IN738; superalloy; additive powder; bonding strength; eutectic;

D O I：

10.4028/www.scientific.net/KEM.345-346.1449

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The microstructure and bonding strength of the wide-gap region brazed with different filler metal powder (BNi-3 and DF 4B) and various powder mixing ratios of additive powder to filler metal powder were investigated. The microstructure characterization showed that Cr borides with a blocky morphology were existed in the brazed region in both filler metal powder, The bonding strength of the wide-gap region brazed with 60 wt.% IN738 additive and 40 wt.% DF 413 powder exhibited 92% tensile strength of IN738 superalloy at room temperature. The Cracks in the wide-gap brazed region initiated at the intermetallic compound and eutectic structure, and then propagated through them.

引用

下载

页码：1449 / +

页数：2

共 45 条

[21] Joining of -TiAl Alloy to Ni-Based Superalloy Using Ag-Cu Sputtered Coated Ti Brazing Filler Foil
Simoes, Sonia
Tavares, Carlos Jose
Guedes, Anibal
METALS, 2018, 8 (09)
[22] Bonding temperature effects on the wide gap transient liquid phase bonding of Inconel 718 using BNi-2 paste filler metal
Yan, Guangxu
Bhowmik, Ayan
Nagarajan, Balasubramanian
Song, Xu
Tan, Sung Chyn
Tan, Ming Jen
APPLIED SURFACE SCIENCE, 2019, 484 : 1223 - 1233
[23] Brazing Characteristics and Bonding Strength of Pure Titanium Joints Brazed with Low-Melting Temperature Zi-17Ti-22Ni Filler Metal
Lee, Sang-Kyo
Lim, Seong-Sik
Shin, Young-Chul
Choi, Ho-Joon
Kim, Tae-Bum
Kim, Jae-Bum
Choi, Dong-Ki
Cho, Chong-Du
Jung, Taek-Kyun
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2019, 19 (03) : 1592 - 1596
[24] Multiscale microstructural consideration of enhanced shear strength in TiAl intermetallic/K4169 alloy composite joints prepared by vacuum brazing with (Ti, Zr)-Ni-based amorphous filler metal
Zhang, Liangliang
Dong, Honggang
Li, Peng
Wu, Baosheng
Ma, Yueting
Huang, Libing
Li, Chao
Li, Jiachen
Journal of Materials Science and Technology, 2024, 172 : 51 - 70
[25] Multiscale microstructural consideration of enhanced shear strength in TiAl intermetallic/K4169 alloy composite joints prepared by vacuum brazing with (Ti, Zr)-Ni-based amorphous filler metal
Zhang, Liangliang
Dong, Honggang
Li, Peng
Wu, Baosheng
Ma, Yueting
Huang, Libing
Li, Chao
Li, Jiachen
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2024, 172 : 51 - 70
[26] Study of brazed diamond micro-powder burs fabricated using induction brazing with either an amorphous or a crystalline Ni-based filler alloy
Ma, Bojiang
Yang, Guanglei
Bu, Fanning
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2017, 62 : 58 - 63
[27] Dissimilar brazing of NbSS/Nb5Si3 composite to GH5188 superalloy using Ni-based filler alloys
Ren, Xinyu
Li, Wenwen
Jing, Yongjuan
Chen, Bo
Huang, Shuai
Xiong, Huaping
WELDING IN THE WORLD, 2021, 65 (09) : 1767 - 1775
[28] Wide gap brazing using Ni-B-Si and Ni-B-Si-Cr-Fe filler metals: Microstructure and high-temperature mechanical properties
Alinaghian, H.
Farzadi, A.
Marashi, P.
Pouranvari, M.
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2023, 23 : 2329 - 2342
[29] Dissimilar brazing of NbSS/Nb5Si3 composite to GH5188 superalloy using Ni-based filler alloys
Xinyu Ren
Wenwen Li
Yongjuan Jing
Bo Chen
Shuai Huang
Huaping Xiong
Welding in the World, 2021, 65 : 1767 - 1775
[30] Effect of brazing temperature and brazing time on the microstructure and tensile strength of TiAl-based alloy joints with Ti-Zr-Cu-Ni amorphous alloy as filler metal
Cai, Y. S.
Liu, R. C.
Zhu, Z. W.
Cui, Y. Y.
Yang, R.
INTERMETALLICS, 2017, 91 : 35 - 44

← 1 2 3 4 5 →