Manufacturing of Cu-TiB2 composites by turbulent in situ mixing process

被引：35
|
作者：
Kim, J. H.
Yun, J. H.
Park, Y. H.
Cho, K. M.
Choi, I. D.
Park, I. M.
机构：
[1] Pusan Natl Univ, Dept Mat Sci & Engn, Pusan 609735, South Korea
[2] Korea Maritime Univ, Dept Mech & Mat Engn, Pusan 606791, South Korea
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2007年 / 449卷
关键词：
in situ process; turbulent; copper matrix composite; TiB2; nanoparticle; FABRICATION; CARBIDE;
D O I：
10.1016/j.msea.2006.02.302
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A copper matrix composite reinforced by turbulent in situ TiB2 nanoparticle was prepared through the reactions of boron and titanium. The microstructure, mechanical and electrical properties of the as-drawn turbulent in situ composites were investigated. The results showed that the turbulent in situ formed TiB2 particles, which had a size of about from 50 to 200 nm, exhibited a homogenous dispersion in the copper matrix. The hardness and Young's modulus of Cu composite elevated with the increase of cooling rate owing to dispersion strengthening by nanoscale TiB2 particles. Moreover, the electrical conductivity of Cu-TiB2 composite improved with the increase of cooling rate. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：1018 / 1021
页数：4
相关论文
共 50 条
  • [31] Mechanical properties of CU-TiB2 nanocomposite by MA/SPS
    Yum, YJ
    Lee, KS
    Kim, JS
    Kwon, YS
    Chang, MG
    Kwon, DH
    Sung, CH
    Korus 2005, Proceedings, 2005, : 568 - 570
  • [32] Relationship between microstructure, properties and reaction conditions for Cu-TiB2 alloys prepared by in situ reaction
    Guo, Mingxing
    Shen, Kun
    Wang, Mingpu
    ACTA MATERIALIA, 2009, 57 (15) : 4568 - 4579
  • [33] Thermodynamics and kinetics of in-situ reaction of double-beam melts for preparing Cu-TiB2 alloys
    School of Materials Science and Engineering, Central South University, Changsha 410083, China
    Zhongguo Youse Jinshu Xuebao, 2007, 9 (1440-1446):
  • [34] Effect of high-energy ball-milling and TiB2 content on microstructures and properties of Cu-TiB2 composites sintered by SPS
    Kwon, Dae-Hwan
    Nguyen, Thuy Dang
    Choi, Pyuck-Pa
    Kim, Ji-Soon
    Kwon, Young-Soon
    HEAT TREATMENT OF MATERIALS, 2006, 118 (661-665): : 661 - +
  • [35] Strengthening Mechanism of a Spray-Formed Cu-TiB2 Composite
    Lee, Jongsang
    Jung, J.Y.
    Lee, Eon-Sik
    Kim, Nack J.
    Ahn, S.
    Metals and Materials International, 1998, 4 (04): : 610 - 615
  • [36] Microstructure of Cu-TiB2 nanocomposite during spark plasma sintering
    Kwon, YS
    Kim, JS
    Park, JJ
    Kim, HT
    Dudina, DV
    DESIGNING, PROCESSING AND PROPERTIES OF ADVANCED ENGINEERING MATERIALS, PTS 1 AND 2, 2004, 449-4 : 1113 - 1116
  • [37] Strengthening mechanism of a spray-formed Cu-TiB2 composite
    Jongsang Lee
    J. Y. Jung
    Eon-Sik Lee
    Nack J. Kim
    S. Ahn
    Metals and Materials, 1998, 4 : 610 - 615
  • [38] Strengthening mechanism of a spray-formed Cu-TiB2 composite
    Lee, J
    Jung, JY
    Lee, ES
    Kim, NJ
    Ahn, S
    METALS AND MATERIALS-KOREA, 1998, 4 (04): : 610 - 615
  • [39] Performance and characterization of dispersion strengthened Cu-TiB2 composite for electrical use
    López, M
    Corredor, D
    Camurri, C
    Vergara, V
    Jiménez, J
    MATERIALS CHARACTERIZATION, 2005, 55 (4-5) : 252 - 262
  • [40] Microstructure and Properties of Laser Cladding Cu-TiB2 Composite Coating on Copper
    Guo, Xiaoqin
    Chen, Jingbo
    Zhang, Xinfang
    Wang, Yongkai
    Zhang, Rui
    HIGH-PERFORMANCE CERAMICS VII, PTS 1 AND 2, 2012, 512-515 : 639 - +
12345