Manufacturing of Cu-TiB2 composites by turbulent in situ mixing process

被引：35
|
作者：
Kim, J. H.
Yun, J. H.
Park, Y. H.
Cho, K. M.
Choi, I. D.
Park, I. M.
机构：
[1] Pusan Natl Univ, Dept Mat Sci & Engn, Pusan 609735, South Korea
[2] Korea Maritime Univ, Dept Mech & Mat Engn, Pusan 606791, South Korea
来源：
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2007年 / 449卷
关键词：
in situ process; turbulent; copper matrix composite; TiB2; nanoparticle; FABRICATION; CARBIDE;
D O I：
10.1016/j.msea.2006.02.302
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
A copper matrix composite reinforced by turbulent in situ TiB2 nanoparticle was prepared through the reactions of boron and titanium. The microstructure, mechanical and electrical properties of the as-drawn turbulent in situ composites were investigated. The results showed that the turbulent in situ formed TiB2 particles, which had a size of about from 50 to 200 nm, exhibited a homogenous dispersion in the copper matrix. The hardness and Young's modulus of Cu composite elevated with the increase of cooling rate owing to dispersion strengthening by nanoscale TiB2 particles. Moreover, the electrical conductivity of Cu-TiB2 composite improved with the increase of cooling rate. (c) 2006 Elsevier B.V. All rights reserved.
引用
收藏
页码：1018 / 1021
页数：4
相关论文
共 50 条
  • [1] Properties of Cu-TiB2 Composites Fabricated by In-situ Liquid Melt Mixing Process
    Yun, J. H.
    Kim, J. H.
    Park, J. S.
    Park, Y. D.
    Park, Y. H.
    Cho, K. M.
    Park, I. M.
    THERMEC 2006 SUPPLEMENT: 5TH INTERNATIONAL CONFERENCE ON PROCESSING AND MANUFACTURING OF ADVANCED MATERIALS, 2007, 15-17 : 215 - 219
  • [2] Design of Turbulent In-situ Mixing Mixer and Fabrication of Cu-TiB2 Nanocomposites
    Choi, Baek-Boo
    Park, Jung-Su
    Yun, Ji-Hun
    Ha, Man-Young
    Park, Yong-Ho
    Park, Ik-Min
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2007, 17 (01): : 11 - 17
  • [3] Effect of cooling rate on mechanical and electrical properties of Cu-TiB2 by turbulent in-situ mixing process
    Park, J. S.
    Yun, J. H.
    Park, Y. D.
    Park, Y. H.
    Cho, K. M.
    Park, I. M.
    NANOCOMPOSITES AND NANOPOROUS MATERIALS, 2007, 119 : 135 - +
  • [4] Study on Cu-TiB2 in situ composite prepared by liquid-metal mixing and rapid solidification process
    Li, Zhou
    Xiao, Zhu
    Guo, Ming-Xing
    Wang, Ming-Pu
    Gong, Zhu-Qing
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2006, 27 (05): : 6 - 9
  • [5] A Study on the Wear Behavior of the Cu-TiB2 Composites
    Kim, Jung-Nam
    Choi, Jong-Un
    Kang, Kae-Myung
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2005, 15 (01): : 61 - 65
  • [6] Observation on the Microstructures of Cu-TiB2 Composites with Wear Behavior
    Lee, Tae-Woo
    Kang, Kae-Myung
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2006, 16 (08): : 511 - 515
  • [7] Characterization of TiB2 Particle Reinforced Cu Matrix Composites Processed by Turbulent In-situ Mixing
    Kim, J. H.
    Yun, J. H.
    Lee, G. G.
    Choi, I. D.
    Park, Y. H.
    Cho, K. M.
    Park, I. M.
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2005, 15 (12): : 809 - 813
  • [8] Study of enhanced dry sliding wear behavior and mechanical properties of Cu-TiB2 composites fabricated by in situ casting process
    Zou, Cunlei
    Chen, Zongning
    Kang, Huijun
    Wang, Wei
    Li, Rengeng
    Li, Tingju
    Wang, Tongmin
    WEAR, 2017, 392 : 118 - 125
  • [9] The Characteristics of Wear Resistance of Cu-TiB2 Composites Reinforced by TiB2 Powders
    Lee, Tae-Woo
    Choi, Jong-Un
    Kang, Kae-Myung
    KOREAN JOURNAL OF MATERIALS RESEARCH, 2005, 15 (12): : 824 - 828
  • [10] Effect of La addition on the particle characteristics, mechanical and electrical properties of in situ Cu-TiB2 composites
    Zou, Cunlei
    Kang, Huijun
    Wang, Wei
    Chen, Zongning
    Li, Rengeng
    Gao, Xiaoxia
    Li, Tingju
    Wang, Tongmin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2016, 687 : 312 - 319
12345