NUMERICAL AND EXPERIMENTAL FORMING OF AXISYMMETRIC PRODUCTS USING FLOW FORMING METHOD FOR HARD-TO-DEFORM MATERIAL

被引：0

作者：

Wozniak, Dawid ^{[1
]}

Hojny, Marcin ^{[1
]}

Glowacki, Miroslaw ^{[1
]}

Gadek, Tomasz ^{[2
]}

机构：

[1] AGH Univ Sci & Technol, PL-30059 Krakow, Poland

[2] Met Forming Inst, Poznan, Poland

来源：

METAL 2015: 24TH INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS | 2015年

关键词：

Flow forming; FEM modeling; hard-to-deform material;

D O I：

暂无

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This article is devoted to the problem of forming of axisymmetric elements of hard-to-deform material. The first stage was the deep drawing process of metal discs. Then the blanks were formed by the method of flow forming. The use of modern computer technology has become an integral part of the development of innovative flow forming technologies. The use of software tools in the forming of numerical analysis systems based on the finite element method speeds up the design and optimization of processes.

引用

页码：452 / 457

页数：6

共 50 条

[41] Deformation Behavior in Flow Forming of Cylindrical Cups using Finite Element Method
Wong, Chow Cher
Danno, Atsushi
Fong, Kai Soon
STEEL RESEARCH INTERNATIONAL, 2010, 81 (09) : 1002 - 1005
[42] Numerical simulation of forming process of glass-lens using finite element method
Department of Mechanical Systems Engineering, Shinshu University, 4-17-1 Wakasato, Nagano-shi, Nagano, 380-8553, Japan
Nihon Kikai Gakkai Ronbunshu A, 2006, 5 (683-690):
[43] Numerical simulation and experiment on material flow regulation during superplastic forming process of box-shaped part
Duan, Qirui
Yuan, Xiaoming
Nanjing Hangkong Hangtian Daxue Xuebao/Journal of Nanjing University of Aeronautics and Astronautics, 2012, 44 (SUPPL.): : 91 - 96
[44] Control of the material flow in sheet-bulk metal forming using modifications of the tool surface
Loeffler, Maria
Schulte, R.
Freiburg, D.
Biermann, D.
Stangier, D.
Tillmann, W.
Merklein, M.
INTERNATIONAL JOURNAL OF MATERIAL FORMING, 2019, 12 (01) : 17 - 26
[45] Control of the material flow in sheet-bulk metal forming using modifications of the tool surface
Maria Löffler
R. Schulte
D. Freiburg
D. Biermann
D. Stangier
W. Tillmann
M. Merklein
International Journal of Material Forming, 2019, 12 : 17 - 26
[46] Analytical solutions of strain of axisymmetric curved part in sheet metal forming process using direct integral method
Qin, Si-Ji
Gai, Bin-bin
Kong, Xiao-hua
Deng, Chao
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2015, 101 : 49 - 58
[47] Numerical and experimental analysis of electrohydraulic forming of Al 5052 and Al 6061 using conical die
Ramesh Kumar
Sunil K. Matwa
Kamlesh Punaisiya
Sachin D. Kore
The International Journal of Advanced Manufacturing Technology, 2022, 122 : 303 - 325
[48] Research on explosive forming of magnesium alloy plate using numerical simulation and experimental studies (II)
Nishi, Masatoshi
Sakaguchi, Hiroko
Tanaka, Shigeru
Iyama, Hirofumi
Fujita, Masahiro
SCIENCE AND TECHNOLOGY OF ENERGETIC MATERIALS, 2021, 82 (02) : 39 - 43
[49] Forming Limit Diagram Prediction of Tailor-Welded Blank Using Experimental and Numerical Methods
Korouyeh, Rasoul Safdarian
Naeini, Hassan Moslemi
Liaghat, Gholamhosein
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2012, 21 (10) : 2053 - 2061
[50] Numerical and experimental approach to reduce bouncing effect in electromagnetic forming process using cushion plate
Hak-Gon Noh
Woo-Jin Song
Beom-Soo Kang
Jeong Kim
Journal of Mechanical Science and Technology, 2014, 28 : 3263 - 3271

← 1 2 3 4 5 →