Contact properties of Ni micro-springs for MEMS probe card

被引：0
|
作者：
Kataoka, K [1 ]
Itoh, T [1 ]
Suga, T [1 ]
Inoue, K [1 ]
机构：
[1] Univ Tokyo, Res Ctr Adv Scienceand Technol, Meguro Ku, Tokyo 1538904, Japan
来源：
ELECTRICAL CONTACTS-2004: PROCEEDINGS OF THE 50TH IEEE HOLM CONFERENCE ON ELECTRICAL CONTACTS/THE 22ND INTERNATIONAL CONFERENCE ON ELECTRICAL CONTACTS | 2004年
关键词：
component; MEMS probe card; 3-dimensional fabrication; fritting;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
We have developed MEMS probe cards consisting of micro-springs arranged in a 250-mum-pitch array. Three-dimensional spring structures were designed and Ni microsprings were directly fabricated on a circuit board by a multilayer electroplating process. IS shaped' springs consisting of seven electroplated layers and 'folded lever' springs of five layers were designed and fabricated. Mechanical properties of the micro-springs were measured and no fracture or deformation were found after applying force of 10 mN for 10,000 times to 7-layer springs, while deformation of 1 Am were found in 5-layer springs. Low force electric contacts of smaller than 5 Omega for Al, and 3 Omega for Cu electrodes were obtained. Difference of the contact resistance in different types of spring structure was found.
引用
收藏
页码：231 / 235
页数：5
相关论文
共 50 条
  • [31] A robust MEMS probe card with vertical guide for a fine pitch test
    Kim, Bong-Hwan
    Kim, Hyeon-Cheol
    Choi, Soon-Don
    Chun, Kukjin
    Kim, Jong-Bok
    Kim, Jong-Hyun
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2007, 17 (07) : 1350 - 1359
  • [32] Matched expansion MEMS probe card with low CTE LTCC substrate
    Choe, Seong-Hun
    Tanaka, Shuji
    Esashi, Masayoshi
    2007 IEEE INTERNATIONAL TEST CONFERENCE, VOLS 1 AND 2, 2007, : 545 - 550
  • [33] SMA film actuated Si cantilever beams for MEMS probe card
    Namazu, T
    Inoue, S
    Tashiro, Y
    Okamura, Y
    Koterazawa, K
    Transducers '05, Digest of Technical Papers, Vols 1 and 2, 2005, : 733 - 736
  • [34] Analysis, simulation and fabrication of MEMS springs for a micro-tensile system
    Liu, Rui
    Wang, Hong
    Li, Xueping
    Tang, Jun
    Mao, Shengping
    Ding, Guifu
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2009, 19 (01)
  • [35] Process effects of double step DRIE and Ni-Co electroplating for a trench-type cantilever probe for a fine-pitched MEMS probe card
    Kim, Bong-Hwan
    Park, Bum-Jin
    Kim, Jong Bok
    SENSORS AND ACTUATORS A-PHYSICAL, 2009, 152 (02) : 252 - 260
  • [36] Design, fabrication and characterization of MEMS probe card for fine pitch IC testing
    Yuan, Tao
    Chen, Di
    Chen, Jingdong
    Fu, Hualin
    Kurth, Steffen
    Otto, Thomas
    Gessner, Thomas
    SENSORS AND ACTUATORS A-PHYSICAL, 2013, 204 : 67 - 73
  • [37] MEMS-based Ni–B probe with enhanced mechanical properties for fine pitch testing
    Kim K.
    Kwon H.-B.
    Ahn H.-R.
    Kim Y.-J.
    Micro and Nano Systems Letters, 5 (1)
  • [38] Design and fabrication of a highly manufacturable MEMS probe card for high speed testing
    Kim, Bong-Hwan
    Kim, Jong-Bok
    JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2008, 18 (07)
  • [39] Mechanical calibration of MEMS springs with sub-micro-Newton force resolution
    Miyamoto, Kenji
    Jornori, Tomoya
    Sugano, Koji
    Tabata, Osamu
    Tsuchiya, Toshiyuki
    SENSORS AND ACTUATORS A-PHYSICAL, 2008, 143 (01) : 136 - 142
  • [40] Characteristics of low force contact process for MEMS probe cards
    Itoh, T
    Kataoka, K
    Suga, T
    TRANSDUCERS '01: EUROSENSORS XV, DIGEST OF TECHNICAL PAPERS, VOLS 1 AND 2, 2001, : 1422 - 1425
12345