Variation on anthracite combustion efficiency with CeO2 and Fe2O3 addition by Differential Thermal Analysis (DTA)

Effects of CeO2 and Fe2O3 on anthracite combustion efficiency were investigated using differential thermal analysis (DTA). Based on heat release (Q(D)) of anthracite as well as anthracite with CeO2 and anthracite with Fe2O3 additions against alpha-Al2O3 in DTA experiment, effects of additives CeO2 and Fe2O3 on anthracite combustion efficiency were evaluated. Under the same experimental conditions, heat releases of raw anthracite, anthracite with CeO2 and anthracite with Fe2O3 were 11.04 kJ/g, 11.30 kJ/g and 11.42 kJ/g, respectively, indicating that anthracite combustion efficiency was improved by addition of CeO2 and Fe2O3. To confirm the above results, carbon transfer was monitored using Thermogravimetric analysis Fourier transform infrared (TGA-FTIR) and Carbon-Sulfur analyzer during catalytic combustion process. The results indicated that CO2 emission was increased, whereas CO emission and residual carbon of ash were decreased, being in accordance with the results of DTA. Finally, according to analyses of ignition temperature and catalytic combustion process, the possible mechanism of catalytic combustion of anthracite was proposed. Crown Copyright (C) 2009 Published by Elsevier Ltd. All rights reserved.