Investigation on microstructure and mechanical properties of diffusion bonded Al/Mg2Si metal matrix composite using copper interlayer

被引:27
|
作者
Nami, H. [1 ]
Halvaee, A. [1 ]
Adgi, H. [1 ]
Hadian, A. [1 ]
机构
[1] Univ Tehran, Sch Met & Mat Engn, Fac Engn, Tehran, Iran
关键词
Diffusion bonding; Mechanical properties; Microstructure; Copper interlayer; TITANIUM;
D O I
10.1016/j.jmatprotec.2010.03.015
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Diffusion bonding of Al/Mg2Si metal matrix composite (MMC) using Cu interlayer at optimal bonding temperature of 5405 degrees C for various bonding durations was investigated This metal matrix composite (MMC) containing 15% Mg2Si particles was produced by in situ technique Specific diffusion bonding process was introduced as a low vacuum technique The composition and microstructure of the joined areas were examined by X-ray diffraction (XRD) and scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (EDS) Microhardness and shear tests were conducted to the samples to evaluate the effect of bonding duration on weldability Several different diffusion layers exist at the bond region depending on the bonding duration The shear strength of Joints increased with bonding duration due to elimination of CuAl2 brittle diffusion layer (C) 2010 Elsevier B V All rights reserved
引用
收藏
页码:1282 / 1289
页数:8
相关论文
共 50 条
  • [21] Effect of phosphorus on microstructure and growth manner of primary Mg2Si crystal in Mg2Si/Al composite
    Qin, Q. D.
    Zhao, Y. G.
    Zhou, W.
    Cong, P. J.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 447 (1-2): : 186 - 191
  • [22] Complex Modification on Microstructure and Properties in Mg2Si Reinforced Hypereutectic Al-Si Composite
    Liu, Zheng
    Liu, Xiao-mei
    MATERIALS AND MANUFACTURING, PTS 1 AND 2, 2011, 299-300 : 735 - 738
  • [23] Effect of modification and aging treatment on mechanical properties of Mg2Si/Al composite
    Qin, Q. D.
    Li, W. X.
    Zhao, K. W.
    Qiu, S. L.
    Zhao, Y. G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (09): : 2253 - 2257
  • [24] Influence of solution heat treatment and ageing on microstructure and properties of in-situ Mg2Si/Mg-Al matrix composite
    Jia, Shu-Zhuo
    Xu, Chun-Jie
    Guo, Xue-Feng
    Zheng, Shui-Yun
    Zhang, Zhong-Ming
    Lu, Tao
    Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, 2006, 27 (06): : 25 - 28
  • [25] Effects of Boron on Microstructure and Tensile Properties of Al-Mg2Si Metal Matrix Composite
    Azarbarmas, M.
    Emamy, M.
    Alipour, M.
    Karamouz, M.
    NUMIFORM 2010, VOLS 1 AND 2: DEDICATED TO PROFESSOR O. C. ZIENKIEWICZ (1921-2009), 2010, 1252 : 1073 - 1083
  • [26] Microstructure evolution and mechanical properties of Mg/Al diffusion bonded joints
    Liu, Wensheng
    Long, Luping
    Ma, Yunzhu
    Wu, Lei
    JOURNAL OF ALLOYS AND COMPOUNDS, 2015, 643 : 34 - 39
  • [27] The effects of Mg2Si(p) on microstructure and mechanical properties of AA332 composite
    Zainon, Fizam
    Ahmad, Khairel Rafezi
    Daud, Ruslizam
    ADVANCES IN MATERIALS RESEARCH-AN INTERNATIONAL JOURNAL, 2016, 5 (01): : 55 - 66
  • [28] Effect of beryllium addition and heat treatment on the microstructure and mechanical properties of the 15%Mg2Si/Al-8Si composite
    Tang, Peng
    Yu, Fengyang
    Teng, Xiaodan
    Peng, Linxin
    Wang, Kang
    MATERIALS CHARACTERIZATION, 2021, 180
  • [29] Low-temperature partial transient liquid phase diffusion bonding of Al/Mg2Si metal matrix composite to AZ91D using Al-based interlayer
    Atabaki, M. Mazar
    Idris, J.
    MATERIALS & DESIGN, 2012, 34 : 832 - 841
  • [30] On the microstructure of an as-cast Al/Mg2Si/Si in-situ composite
    Inst of Metal Research, Chinese Acad of Sciences, Shenyang, China
    Fuhe Cailiao Xuebao, 4 (30-34):