Investigation on microstructure and mechanical properties of diffusion bonded Al/Mg2Si metal matrix composite using copper interlayer

被引：27
|
作者：
Nami, H. [1 ]
Halvaee, A. [1 ]
Adgi, H. [1 ]
Hadian, A. [1 ]
机构：
[1] Univ Tehran, Sch Met & Mat Engn, Fac Engn, Tehran, Iran
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2010年 / 210卷 / 10期
关键词：
Diffusion bonding; Mechanical properties; Microstructure; Copper interlayer; TITANIUM;
D O I：
10.1016/j.jmatprotec.2010.03.015
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Diffusion bonding of Al/Mg2Si metal matrix composite (MMC) using Cu interlayer at optimal bonding temperature of 5405 degrees C for various bonding durations was investigated This metal matrix composite (MMC) containing 15% Mg2Si particles was produced by in situ technique Specific diffusion bonding process was introduced as a low vacuum technique The composition and microstructure of the joined areas were examined by X-ray diffraction (XRD) and scanning electron microscopy equipped with energy dispersive X-ray spectroscopy (EDS) Microhardness and shear tests were conducted to the samples to evaluate the effect of bonding duration on weldability Several different diffusion layers exist at the bond region depending on the bonding duration The shear strength of Joints increased with bonding duration due to elimination of CuAl2 brittle diffusion layer (C) 2010 Elsevier B V All rights reserved
引用
收藏
页码：1282 / 1289
页数：8
相关论文
共 50 条
  • [1] Microstructure and mechanical properties of diffusion bonded Al/Mg2Si metal matrix in situ composite
    Nami, H.
    Halvaee, A.
    Adgi, H.
    Hadian, A.
    MATERIALS & DESIGN, 2010, 31 (08) : 3908 - 3914
  • [2] Microstructure and mechanical properties of friction stir welded Al/Mg2Si metal matrix cast composite
    Nami, H.
    Adgi, H.
    Sharifitabar, M.
    Shamabadi, H.
    MATERIALS & DESIGN, 2011, 32 (02) : 976 - 983
  • [3] On the Role of Bonding Time on Microstructure and Mechanical Properties of TLP Bonded Al/Mg2Si Composite
    Ghayoor, Milad
    Hadian, Ali M.
    JOURNAL OF COMPOSITES SCIENCE, 2019, 3 (03):
  • [4] The influence of beryllium addition on the microstructure and mechanical properties of Al-15%Mg2Si in-situ metal matrix composite
    Azarbarmas, Mortaza
    Emamy, Masoud
    Rassizadehghani, Jafar
    Alipour, Mohammad
    Karamouz, Mostafa
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2011, 528 (28): : 8205 - 8211
  • [5] Transient liquid phase diffusion bonding of Al/Mg2Si metal matrix composite
    Nami, H.
    Halvaee, A.
    Adgi, H.
    MATERIALS & DESIGN, 2011, 32 (07) : 3957 - 3965
  • [6] Effect of ultrasonic stirring on the microstructure and mechanical properties of in situ Mg2Si/Al composite
    Lin, Jixing
    Bai, Guangzhu
    Liu, Zheng
    Niu, Liyuan
    Li, Guangyu
    Wen, Cuie
    MATERIALS CHEMISTRY AND PHYSICS, 2016, 178 : 112 - 118
  • [7] Microstructure and mechanical properties of diffusion-bonded Mg-Al joints using silver film as interlayer
    Wang, Yiyu
    Luo, Guoqiang
    Zhang, Jian
    Shen, Qiang
    Zhang, Lianmeng
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2013, 559 : 868 - 874
  • [8] Effect of Ce Inoculation on Microstructure and Mechanical Properties of in situ Al–20%Mg2Si Composite
    Yingmin Li
    Tongyu Liu
    Shengyuan Chen
    Yuyan Ren
    International Journal of Metalcasting, 2019, 13 : 331 - 336
  • [9] Microstructure and mechanical property of the ECAPed Mg2Si/Mg composite
    Gan, W. M.
    Wu, K.
    Zheng, M. Y.
    Wang, X. J.
    Chang, H.
    Brokmeier, H. -G.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2009, 516 (1-2): : 283 - 289
  • [10] High Temperature Flow Behavior and Microstructure of Al-Cu/Mg2Si Metal Matrix Composite
    Shafieizad, A. H.
    Zarei-Hanzaki, A.
    Ghambari, M.
    Abbasi-Bani, A.
    JOURNAL OF ENGINEERING MATERIALS AND TECHNOLOGY-TRANSACTIONS OF THE ASME, 2015, 137 (02):
12345