Zirconia-based potentiometric sensor using a pair of oxide electrodes for selective detection of carbon monoxide

被引：29
|
作者：
Miura, N
Raisen, T
Lu, GY
Yamazoe, N
机构：
[1] Dept. of Mat. Science and Technology, Grad. School of Engineering Sciences, Kyushu University, Kasuga-shi
来源：
JOURNAL OF THE ELECTROCHEMICAL SOCIETY | 1997年 / 144卷 / 07期
关键词：
D O I：
10.1149/1.1837798
中图分类号：
O646 [电化学、电解、磁化学];
学科分类号：
081704 ;
摘要：
By using a pair of oxide electrodes, a stabilized-zirconia-based sensor was developed for selective detection of CO at high temperature. Among the oxide pair examined, the combination of CdO and SnO2 was best suited for the electrode couple. giving quick and selective response to CO in air at 600 degrees C. The 90% response and the 90% recovery times of the sensor to 200 ppm CO was as short as ca. 8 and 10 s, respectively, at 600 degrees C. The EMF value was linearly related with the logarithm of CO concentration in the range of 20 to 4000 ppm. Moreover, the cross-sensitivities to other gases, such as H-2, NO, NO2, CO2, O-2, and H2O, were small or insignificant.
引用
收藏
页码：L198 / L200
页数：3
相关论文
共 50 条
  • [31] Plasma sprayed copper oxide sensor for selective sensing of carbon monoxide
    Ambardekar, V
    Bandyopadhyay, P. P.
    Majumder, S. B.
    MATERIALS CHEMISTRY AND PHYSICS, 2021, 258
  • [32] Novel zirconia-based NO2 sensor attached with carbon sensing-electrode
    Sato, Tomoaki
    Ikeda, Hiroshi
    Miura, Norio
    ELECTROCHEMISTRY COMMUNICATIONS, 2014, 46 : 60 - 62
  • [33] Detection of combustible hydrogen-containing gases by using impedancemetric zirconia-based water-vapor sensor
    Nakatou, M
    Miura, N
    SOLID STATE IONICS, 2005, 176 (31-34) : 2511 - 2515
  • [34] Stabilized zirconia-based sensor attached with NiO/Au sensing electrode aiming for highly selective detection of ammonia in automobile exhausts
    Elumalai, Perumal
    Plashnitsa, Vladimir V.
    Fujio, Yuki
    Miura, Norio
    ELECTROCHEMICAL AND SOLID STATE LETTERS, 2008, 11 (11) : J79 - J81
  • [35] Effects of carbon monoxide, carbon dioxide, and methane on nickel/yttria-stabilized zirconia-based solid oxide fuel cells performance for direct coupling with a gasifier
    Lebreton, M.
    Delanoue, B.
    Baron, E.
    Ricoul, F.
    Kerihuel, A.
    Subrenat, A.
    Joubert, O.
    La Salle, A. Le Gal
    INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2015, 40 (32) : 10231 - 10241
  • [36] Stabilized zirconia-based electrochemical sensors attached with oxide electrode for detection of NO or NO2
    Lu, G
    Miura, N
    Yamazoe, N
    TECHNICAL DIGEST OF THE SEVENTH INTERNATIONAL MEETING ON CHEMICAL SENSORS, 1998, : 112 - 114
  • [37] Pillared clay and zirconia-based monolithic catalysts for selective catalytic reduction of nitric oxide by methane
    Bahamonde, A
    Mohino, F
    Rebollar, M
    Yates, M
    Avila, P
    Mendioroz, S
    CATALYSIS TODAY, 2001, 69 (1-4) : 233 - 239
  • [38] Sensing characteristics of mixed-potential-type zirconia-based sensor using laminated-oxide sensing electrode
    Elumalai, Perumal
    Plashnitsa, Vladimir V.
    Ueda, Taro
    Miura, Norio
    ELECTROCHEMISTRY COMMUNICATIONS, 2008, 10 (05) : 745 - 748
  • [39] POTENTIOMETRIC SENSOR USING STABILIZED ZIRCONIA AND TUNGSTEN-OXIDE FOR HYDROGEN-SULFIDE
    YAN, YT
    MIURA, N
    YAMAZOE, N
    CHEMISTRY LETTERS, 1994, (09) : 1753 - 1756
  • [40] YSZ-based sensor using Cr-Fe-based spinel-oxide electrodes for selective detection of CO
    Anggraini, Sri Ayu
    Fujio, Yuki
    Ikeda, Hiroshi
    Miura, Norio
    ANALYTICA CHIMICA ACTA, 2017, 982 : 176 - 184
12345