A new type of tribological coating for machine elements based on carbon, molybdenum disulphide and titanium diboride

被引:33
|
作者
Steinmann, M [1 ]
Müller, A [1 ]
Meerkamm, H [1 ]
机构
[1] Univ Erlangen Nurnberg, Inst Engn Design, D-91058 Erlangen, Germany
关键词
MoS2; carbon; relative humidity; friction; wear; pin-on-disk test;
D O I
10.1016/j.triboint.2004.07.003
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
In this study, solid lubricant films containing molybdenum disulphide, carbon, and titanium diboride (MoS2:C:TiB2) were deposited onto steel substrates by a non-reactive d.c. magnetron sputtering process. Adhesion was examined as a function of sputter-etching parameters and design of the interface between TiB2 intermediate layer and MoS2:C:TiB2 top layer. Optimum adhesion was achieved by a short sputter etching process at high r.f. power in combination with a smoothly graded interface. The tribological behaviour of the optimized coating was then examined at ambient air in dependence of relative humidity (RH). The friction coefficient turned out to be nearly independent of RH. The wear rate at low RH was about 5 x 10(-8) mm(3)/Nm. However, wear rate increased significantly with RH. (C) 2004 Elsevier Ltd. All rights reserved.
引用
收藏
页码:879 / 885
页数:7
相关论文
共 50 条
  • [21] Tribological behavior of sustainable carbon based composite coating for wear resistance applications
    Tyagi, Ankit
    Pandey, S. M.
    Gupta, Kalpna
    Walia, R. S.
    Murtaza, Qasim
    Krishen, Kumar
    MATERIALS RESEARCH EXPRESS, 2019, 6 (12)
  • [22] Functionalized multiwall carbon nanotube-molybdenum disulphide nanocomposite based electrochemical ultrasensitive detection of neurotransmitter epinephrine
    Kumar, Sachin
    Awasthi, Abhishek
    Sharma, Manish Dev
    Singh, Kulvinder
    Singh, Dilbag
    Materials Chemistry and Physics, 2022, 290
  • [23] Functionalized multiwall carbon nanotube-molybdenum disulphide nanocomposite based electrochemical ultrasensitive detection of neurotransmitter epinephrine
    Kumar, Sachin
    Awasthi, Abhishek
    Sharma, Manish Dev
    Singh, Kulvinder
    Singh, Dilbag
    MATERIALS CHEMISTRY AND PHYSICS, 2022, 290
  • [24] High performance asymmetric supercapacitor based on molybdenum disulphide/graphene foam and activated carbon from expanded graphite
    Masikhwa, Tshifhiwa M.
    Madito, Moshawe J.
    Bello, Abdulhakeem
    Dangbegnon, Julien K.
    Manyala, Ncholu
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2017, 488 : 155 - 165
  • [25] Hypochloride carbon chains as a new type of galvanic elements
    Thiel, A
    ZEITSCHRIFT FUR ELEKTROCHEMIE UND ANGEWANDTE PHYSIKALISCHE CHEMIE, 1915, 21 : 325 - 329
  • [26] Effect of Molybdenum Content on Structural, Mechanical, and Tribological Properties of Hot Isostatically Pressed β-Type Titanium Alloys for Orthopedic Applications
    Fellah, Mamoun
    Hezil, Naouel
    Abdul Samad, Mohammed
    Djellabi, Ridha
    Montagne, Alex
    Mejias, Alberto
    Kossman, Stephania
    Iost, Alain
    Purnama, Agung
    Obrosov, Aleksei
    Weiss, Sabine
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2019, 28 (10) : 5988 - 5999
  • [27] Calculation elements for a new type of turning pistons working machine
    Baran, N
    REVISTA DE CHIMIE, 2000, 51 (04): : 318 - 321
  • [28] Effect of Molybdenum Content on Structural, Mechanical, and Tribological Properties of Hot Isostatically Pressed β-Type Titanium Alloys for Orthopedic Applications
    Mamoun Fellah
    Naouel Hezil
    Mohammed Abdul Samad
    Ridha Djellabi
    Alex Montagne
    Alberto Mejias
    Stephania Kossman
    Alain Iost
    Agung Purnama
    Aleksei Obrosov
    Sabine Weiss
    Journal of Materials Engineering and Performance, 2019, 28 : 5988 - 5999
  • [29] High temperature tribological behavior of W containing diamond-like carbon (DLC) coating against titanium alloys
    Banerji, A.
    Bhowmick, S.
    Alpas, A. T.
    SURFACE & COATINGS TECHNOLOGY, 2014, 241 : 93 - 104
  • [30] FRICTION AND WEAR CHARACTERISTICS OF DIAMOND-LIKE CARBON (DLC) COATING USED FOR MACHINE ELEMENTS
    Kim, D. W.
    Kim, K. W.
    PROCEEDINGS OF THE ASME/STLE INTERNATIONAL JOINT TRIBOLOGY CONFERENCE - 2011, 2012, : 203 - 205