Thermal stability of a plastic bonded explosive

被引:7
|
作者
Tompa, AS [1 ]
Boswell, RF [1 ]
机构
[1] USN, Surface Warfare Ctr, Indian Head Div, Indian Head, MD 20640 USA
关键词
plastic bonded explosive; differential scanning calorimetry; thermogravimetry;
D O I
10.1016/S0040-6031(00)00386-5
中图分类号
O414.1 [热力学];
学科分类号
摘要
Data on the thermal stability of a plastic bonded explosive containing an oxidizer cyclotetramethylene tetranitramine (HMX), binder and plasticizer was required in order to satisfy the requirement of NAVORD OD 44811 and to obtain safety information for handling and use. The thermal stability of the PBX was determined by dynamic differential scanning calorimetry (DSC) in sealed/unsealed sample pans and by thermogravimetry (TG) in a nitrogen atmosphere using the variable heating rate method. Critical temperature for self-heating at various sample radii and the 500 day cookoff temperature were calculated. Thermal conductivity, specific heat and thermal diffusivity were determined at the critical temperatures in order to calculate the approximate time to explosion at these temperatures. A DSC self-heating half-life experiment was carried out to confirm that the overall decomposition of the PBX was first order. Published by Elsevier Science B.V.
引用
收藏
页码:169 / 175
页数:7
相关论文
共 50 条
  • [31] THERMAL-STABILITY OF AN EXPLOSIVE DETONATOR
    TOMPA, AS
    THERMOCHIMICA ACTA, 1984, 80 (02) : 367 - 377
  • [32] Numerical parameter optimizations of the Ignition and Growth model for a HMX plastic bonded explosive
    Gambino, James R.
    Tarver, Craig M.
    Springer, H. Keo
    JOURNAL OF APPLIED PHYSICS, 2018, 124 (19) : 1DUMY
  • [33] One-dimensional creep-damage model of plastic bonded explosive
    2000, China Ordnance Soc, Beijing, China (21):
  • [34] ESTIMATE OF PBX (PLASTIC-BONDED EXPLOSIVE) SHELF LIFE WITH ACCELERATED AGING
    Kirchhof, Edemar
    Rocha, Roberta Jachura
    Nakamura, Nanci Miyeko
    Lapa, Camila Maria
    Martins Pinheiro, Glaci Ferreira
    Boschi Goncalves, Rene Francisco
    Fritz Fidel Rocco, Jose Atilio
    Iha, Koshun
    QUIMICA NOVA, 2016, 39 (06): : 661 - 668
  • [35] Microstructural effects of processing in the plastic-bonded explosive Composition A-3
    Yeager, J. D.
    Ramos, K. J.
    Pesce-Rodriguez, R. A.
    Piraino, S. M.
    MATERIALS CHEMISTRY AND PHYSICS, 2013, 139 (01) : 305 - 313
  • [36] Brazilian disk compression testing of plastic-bonded idoxuridine mock explosive
    Liu, C.
    Woznick, C. S.
    Scott, S. J.
    Duque, A. L.
    Herman, M. J.
    Yeager, J. D.
    JOURNAL OF ENERGETIC MATERIALS, 2023, 41 (03) : 319 - 350
  • [37] Shock Pressure Dependence of Hot Spots in a Model Plastic-Bonded Explosive
    Johnson, Belinda P.
    Zhou, Xuan
    Dlott, Dana D.
    JOURNAL OF PHYSICAL CHEMISTRY A, 2022, 126 (01): : 145 - 154
  • [38] Use of a Reverberation Technique to Determine Gruneisen Parameter of Unreacted Plastic bonded Explosive
    Qin, Shuang
    Zhang, Xu
    Liu, Jun Ming
    Yu, Zheng
    Zhao, Feng
    Zhang, Rong
    Zhong, Bin
    PROPELLANTS EXPLOSIVES PYROTECHNICS, 2019, 44 (02) : 166 - 174
  • [39] Mechanical and Explosive Properties of Plastic Bonded Explosives Based on Mixture of HMX and TATB
    Singh, Arjun
    Kumar, Mahesh
    Soni, Pramod
    Singh, Manjit
    Srivastava, Alok
    DEFENCE SCIENCE JOURNAL, 2013, 63 (06) : 622 - 629
  • [40] INFLUENCE OF THE OCTOGEN QUALITY AND PRODUCTION SCALE ON CHARACTERISTICS OF GRANULATED PLASTIC BONDED EXPLOSIVE
    Kemmoukhe, Hicham
    Terzic, Slavica
    Dimic, Mirjana
    Simic, Danica
    Burzic, Zijah
    Jelisavac, Ljiljana
    CHEMICAL INDUSTRY & CHEMICAL ENGINEERING QUARTERLY, 2020, 26 (02) : 183 - 190