An Investigation into the Experimental and Finite Element Analysis of Cutting Forces in Milling: A Study on Machining of Pure Molybdenum

被引：3
|
作者：
Gokce, Huseyin [1 ]
Ciftci, Ibrahim [2 ]
Gokce, Harun [3 ]
机构：
[1] Cankiri Karatekin Univ, Meslek Yuksek Okulu, Makine & Met Teknol Bolumu, Cankiri, Turkey
[2] Cankiri Karatekin Univ, Makine Muh Bolumu, Muhendislik Fak, Cankiri, Turkey
[3] TUBITAK Savunma Sanayii Arastirma & Gelistirme En, Ankara, Turkey
来源：
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI | 2019年 / 22卷 / 04期
关键词：
Milling; Finite Element Analysis (FEA); deform-3D;
D O I：
10.2339/politeknik.482604
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this study, milling tests were carried out on commercially pure molybdenum. The tests were conducted at various cutting parameters using carbide cutting tools without coolant. The cutting forces acting on the workpiece during the milling tests were measured. In addition, the cutting forces were aimed to be determined through finite element analysis (FEA) method. Deform-3D software was used for finite element analysis. The cutting tool was modelled through reverse engineering approach using Geomagic Design X software. The measured cutting force results were compared with the finite element analysis results and a good correlation (a 10 % difference) was seen between the measured and modelled results.
引用
收藏
页码：947 / 954
页数：8
相关论文
共 50 条
  • [1] Side Milling Machining Simulation Using Finite Element Analysis: Prediction of Cutting Forces
    Mebrahitom, A.
    Choon, Wong
    Azhari, A.
    [J]. MATERIALS TODAY-PROCEEDINGS, 2017, 4 (04) : 5215 - 5221
  • [2] Finite element analysis of cutting forces in high speed machining
    Zhao, Jun
    Ai, Xing
    Li, Zuoli
    [J]. ADVANCES IN MATERIALS MANUFACTURING SCIENCE AND TECHNOLOGY II, 2006, 532-533 : 753 - +
  • [3] Prediction of Cutting Forces in Milling Using Machine Learning Algorithms and Finite Element Analysis
    Paschalis Charalampous
    [J]. Journal of Materials Engineering and Performance, 2021, 30 : 2002 - 2013
  • [4] Prediction of Cutting Forces in Milling Using Machine Learning Algorithms and Finite Element Analysis
    Charalampous, Paschalis
    [J]. JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2021, 30 (03) : 2002 - 2013
  • [5] An Experimental Investigation of Dynamic Cutting Forces in the Stable Milling Processes
    Nhu-Tung Nguyen
    Yung-Chou Kao
    Gia Thinh Bui
    Quan Nguyen
    Quoc-Manh Nguyen
    The-Vinh Do
    [J]. ADVANCES IN ENGINEERING RESEARCH AND APPLICATION, 2019, 63 : 158 - 166
  • [6] 3D finite element analysis of cutting forces in the process of machining rectangular microchannels
    [J]. He, Zhanshu (hezhanshu@qq.com), 1600, Bentham Science Publishers B.V., P.O. Box 294, Bussum, 1400 AG, Netherlands (08):
  • [7] Cutting forces analysis of micro-milling process on Inconel 718 - a finite element approach
    Tripathy, Padmaja
    Maity, Kalipada
    [J]. INTERNATIONAL JOURNAL OF MODELING SIMULATION AND SCIENTIFIC COMPUTING, 2020, 11 (02)
  • [8] Analysis of cutting forces in peripheral milling under varying machining conditions
    Perez Garcia, Hilde
    Diez Cifuentes, Eduardo
    Perez Garcia, Jesus
    Vizan Idoipe, Antonio
    [J]. ADVANCES IN MATERIALS PROCESSING TECHNOLOGIES-MESIC V, 2014, 797 : 23 - +
  • [9] Influence of Material Models Used in Finite Element Modeling on Cutting Forces in Machining
    Jivishov, Vusal
    Rzayev, Elchin
    [J]. VII INTERNATIONAL SCIENTIFIC PRACTICAL CONFERENCE INNOVATIVE TECHNOLOGIES IN ENGINEERING, 2016, 142
  • [10] Experimental and numerical investigation into machining parameters for cutting forces and temperatures of PBX
    Zhao, XD
    Bai, P
    Li, M
    Shi, ZJ
    Huang, SC
    [J]. Theory and Practice of Energetic Materials, Vol 6, 2005, : 338 - 342
12345