Effects of frequency and grouted length on the behavior of guided ultrasonic waves in rock bolts

被引：42
|
作者：
Zou, D. H. [1 ]
Cui, Y. [1 ]
Madenga, V. [1 ]
Zhang, C. [1 ]
机构：
[1] Dalhousie Univ, Dept Civil & Resource Engn, Halifax, NS B3H 3J5, Canada
来源：
INTERNATIONAL JOURNAL OF ROCK MECHANICS AND MINING SCIENCES | 2007年 / 44卷 / 06期
基金：
加拿大自然科学与工程研究理事会;
关键词：
rock bolts; guided waves; attenuation; amplitude; group velocity;
D O I：
10.1016/j.ijrmms.2006.12.002
中图分类号：
P5 [地质学];
学科分类号：
0709 ; 081803 ;
摘要：
Experiments were conducted to study the behavior of guided waves in free and grouted rock bolts. Ultrasonic waves with frequencies from 25 to 100kHz were used as excitation inputs. Tests were first conducted on free bolts to help understand the behavior of guided waves in non-grouted bolts. The effects of wave frequency and grouted length on the group velocity and attenuation of the guided ultrasonic waves were then evaluated. The test results indicated clear but different trends for the group velocity in the free and the grouted bolts. The attenuation in free bolts was not affected by bolt length and frequency. However, in grouted bolts it increased with frequency and grouted length. It was also found that the two main sources of attenuation are the setup energy loss, which has a fixed quantity for a specific type of test setup, and the dispersive and spreading energy loss which varies with frequency and bolt length. (C) 2007 Elsevier Ltd. All rights reserved.
引用
收藏
页码：813 / 819
页数：7
相关论文
共 50 条
  • [21] Propagation characteristics of ultrasonic guided waves in bolts embedded in soil
    Sun Yaxin
    He Cunfu
    Wu Bin
    Wang Xiuyan
    Liu Zenghua
    THIRD INTERNATIONAL SYMPOSIUM ON PRECISION MECHANICAL MEASUREMENTS, PTS 1 AND 2, 2006, 6280
  • [22] A study of the load transfer behavior of fully grouted rock bolts with analytical modelling
    Chen, Jianhang
    He, Fulian
    Zhang, Shoubao
    INTERNATIONAL JOURNAL OF MINING SCIENCE AND TECHNOLOGY, 2020, 30 (01) : 105 - 109
  • [23] Effects of rock weathering on guided wave propagation in rock bolts
    Yu, Jung-Doung
    Lee, Jong-Sub
    Yoon, Hyung-Koo
    TUNNELLING AND UNDERGROUND SPACE TECHNOLOGY, 2021, 115
  • [24] Investigation on Methods of Determining the Grouting Quality of Embedded Rock Bolts Using High Frequency Guided Waves
    Li, Peng
    Zhang, Changsuo
    Yang, Guanlin
    ADVANCES IN CIVIL ENGINEERING, 2021, 2021
  • [25] Experimental Investigation of the Tensile Behavior of Rock with Fully Grouted Bolts by the Direct Tensile Test
    Wu, Chuangzhou
    Chen, Xuguang
    Hong, Yi
    Xu, Riqing
    Yu, Denghua
    ROCK MECHANICS AND ROCK ENGINEERING, 2018, 51 (01) : 351 - 357
  • [26] Experimental Investigation of the Tensile Behavior of Rock with Fully Grouted Bolts by the Direct Tensile Test
    Chuangzhou Wu
    Xuguang Chen
    Yi Hong
    Riqing Xu
    Denghua Yu
    Rock Mechanics and Rock Engineering, 2018, 51 : 351 - 357
  • [27] Experimental and Numerical Study of the Dynamic Mechanical Behavior of Fully Grouted GFRP Rock Bolts
    Wang, Wenjie
    Yu, Longzhe
    Xu, Chaoshui
    Liu, Chao
    Wang, Hao
    Ye, Jingting
    INTERNATIONAL JOURNAL OF GEOMECHANICS, 2023, 23 (09)
  • [28] Low-cost instrumentation for high frequency ultrasonic guided wave laboratory research in free rock bolts
    Loveday, Philip W.
    Fromme, Paul
    APPLIED ACOUSTICS, 2025, 227
  • [29] Behavior of grouted rock bolts under varying stress factor of safety in tunnel contractual specifications
    Malik, Akx
    NEW CHALLENGES IN ROCK MECHANICS AND ROCK ENGINEERING, EUROCK 2024, 2024, : 1334 - 1339
  • [30] Mechanical Behavior of Fully Grouted Rock Bolts in Hydraulic Tunnels Subjected to Elevated Ground Temperatures
    Jiang, Haibo
    Li, Shuangxi
    Li, Qinglin
    Xu, Juncai
    BUILDINGS, 2023, 13 (05)
12345