Laser butt joining of Al2O3 ceramic plates metallized by friction stir welding

被引：5

作者：

Sonomura, Hirosuke ^{[1
]}

Katagiri, Kazuaki ^{[1
]}

Yamaguchi, Takuto ^{[1
]}

Tanaka, Keigo ^{[1
]}

Ozaki, Tomoatsu ^{[1
]}

Hasegawa, Yasunori ^{[1
]}

Tanaka, Tsutomu ^{[1
]}

Kakitsuji, Atsushi ^{[1
]}

机构：

[1] Osaka Res Inst Ind Sci & Technol, 7-1 Ayumino-2, Izumi, Osaka 5941157, Japan

来源：

CERAMICS INTERNATIONAL | 2022年 / 48卷 / 16期

关键词：

Laser butt joining; Brazing; Metallization; Al; 2; O; 3; ceramics; MICROSTRUCTURE; ALUMINA;

D O I：

10.1016/j.ceramint.2022.04.329

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Laser butt joining of Al2O3 ceramic plates was successfully achieved after metallization of the plate end surfaces with Mo by friction stir welding. This pretreatment technique conveniently afforded metallized Al2O3 ceramic plates with a high adhesive strength exceeding 7.16 MPa between the Mo film and the plate. Two pieces of Mo or Ni foil with a thickness of 20 mu m were then inserted between the metallized end surfaces and laser butt joining was performed. The tensile strengths of the butt joints obtained using Mo and Ni foil as the insert material reached 0.21 and 0.63 MPa, respectively.

引用

页码：23381 / 23386

页数：6

共 50 条

[41] Investigation on the Joinability of Al 6061 Al-Alloy Plates with Friction Stir Welding
Eker, Ilker
Sevim, Ibrahim
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI, 2009, 15 (02): : 137 - 141
[42] Microstructural and mechanical characteristics of AA7020-O Al plates joined by friction stir welding
Gaafer, A. M.
Mahmoud, T. S.
Mansour, E. H.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (27-28): : 7424 - 7429
[43] Taguchi optimization of process parameters in friction stir welding of the AA7010–SiC–Al2O3 hybrid composite
Gopi Krishnan P.
Siva K.
High Temperature Material Processes, 2016, 20 (03): : 185 - 196
[44] Tool wear in the friction-stir welding of aluminum alloy 6061+20% Al2O3:: a preliminary study
Prado, RA
Murr, LE
Shindo, DJ
Soto, KF
SCRIPTA MATERIALIA, 2001, 45 (01) : 75 - 80
[45] Friction-stir welding:: A study of tool wear variation in aluminum alloy 6061+20% Al2O3
Prado, RA
Murr, LE
Shindo, DJ
McClure, JC
FRICTION STIR WELDING AND PROCESSING, 2001, : 105 - 116
[46] Effects of Friction Load and Ultrasonic Vibration on The Tribological Properties of Al2O3/Al2O3 Ceramic Friction Pairs under Liquid Paraffin Lubrication
Dong Xinyu
Qiao Yulin
Zang Yan
Cui Qingsheng
ADVANCES IN MATERIALS AND MATERIALS PROCESSING, PTS 1-3, 2013, 652-654 : 1881 - 1885
[47] Effect of friction stir processing on the tribological performance of Steel/Al2O3 nanocomposites
Ghasemi-Kahrizsangi, A.
Kashani-Bozorg, S. F.
Moshref-Javadi, M.
SURFACE & COATINGS TECHNOLOGY, 2015, 276 : 507 - 515
[48] FABRICATION OF AZ31/Al2O3 NANOCOMPOSITES BY FRICTION STIR PROCESSING
Azizieh, M.
Kim, H. S.
Kokabi, A. H.
Abachi, P.
Shahraki, B. K.
REVIEWS ON ADVANCED MATERIALS SCIENCE, 2011, 28 (01) : 85 - 89
[49] Design of friction stir welding for butt joining of aluminum to steel of dissimilar thickness: heat treatment and fracture behavior
Beygi, R.
Zarezadeh Mehrizi, M.
Akhavan-Safar, A.
Safaei, S.
Loureiro, A.
da Silva, L. F. M.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 112 (7-8): : 1951 - 1964
[50] Electrically assisted friction stir welding for joining Al 6061 to TRIP 780 steel
Liu, Xun
Lan, Shuhuai
Ni, Jun
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2015, 219 : 112 - 123

← 1 2 3 4 5 →