Laser butt joining of Al2O3 ceramic plates metallized by friction stir welding

被引：5

作者：

Sonomura, Hirosuke ^{[1
]}

Katagiri, Kazuaki ^{[1
]}

Yamaguchi, Takuto ^{[1
]}

Tanaka, Keigo ^{[1
]}

Ozaki, Tomoatsu ^{[1
]}

Hasegawa, Yasunori ^{[1
]}

Tanaka, Tsutomu ^{[1
]}

Kakitsuji, Atsushi ^{[1
]}

机构：

[1] Osaka Res Inst Ind Sci & Technol, 7-1 Ayumino-2, Izumi, Osaka 5941157, Japan

来源：

CERAMICS INTERNATIONAL | 2022年 / 48卷 / 16期

关键词：

Laser butt joining; Brazing; Metallization; Al; 2; O; 3; ceramics; MICROSTRUCTURE; ALUMINA;

D O I：

10.1016/j.ceramint.2022.04.329

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Laser butt joining of Al2O3 ceramic plates was successfully achieved after metallization of the plate end surfaces with Mo by friction stir welding. This pretreatment technique conveniently afforded metallized Al2O3 ceramic plates with a high adhesive strength exceeding 7.16 MPa between the Mo film and the plate. Two pieces of Mo or Ni foil with a thickness of 20 mu m were then inserted between the metallized end surfaces and laser butt joining was performed. The tensile strengths of the butt joints obtained using Mo and Ni foil as the insert material reached 0.21 and 0.63 MPa, respectively.

引用

页码：23381 / 23386

页数：6

共 50 条

[1] Metallization of Al2O3 ceramic with Mg by friction stir spot welding
Sonomura, Hirosuke
Ozaki, Tomoatsu
Katagiri, Kazuaki
Hasegawa, Yasunori
Tanaka, Tsutomu
Kakitsuji, Atsushi
CERAMICS INTERNATIONAL, 2021, 47 (09) : 12789 - 12794
[2] The joining of the thin plates by friction stir welding
Sato, Akihiro
Hirano, Satoshi
Aota, Kinya
Yosetsu Gakkai Shi/Journal of the Japan Welding Society, 2015, 84 (03): : 189 - 192
[3] Butt joining of Al-Cu bilayer sheet through friction stir welding
Beygi, R.
Kazeminezhad, M.
Kokabi, A. H.
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (12) : 2925 - 2929
[4] Friction stir butt welding of A5052-O aluminum alloy plates
Sung-Ook YOON
Myoung-Soo KANG
Hyun-Bin NAM
Yong-Jai KWON
Sung-Tae HONG
Jin-Chun KIM
Kwang-Hak LEE
Chang-Yong LIM
Jong-Dock SEO
Transactions of Nonferrous Metals Society of China, 2012, 22(S3) (S3) : 619 - 623
[5] Friction stir butt welding of A5052-O aluminum alloy plates
Yoon, Sung-Ook
Kang, Myoung-Soo
Nam, Hyun-Bin
Kwon, Yong-Jai
Hong, Sung-Tae
Kim, Jin-Chun
Lee, Kwang-Hak
Lim, Chang-Yong
Seo, Jong-Dock
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 : S619 - S623
[6] Friction stir welding of Al2O3 particulate 6061 Al alloy composite
Nakata, K
Inoki, S
Nagano, Y
Ushio, M
THERMEC'2003, PTS 1-5, 2003, 426-4 : 2873 - 2878
[7] Joining of PEEK plates by friction stir welding process
Jose, J. Vinodh
Panneerselvam, K.
MATERIALS TODAY-PROCEEDINGS, 2021, 39 : 1635 - 1639
[8] Friction Stir Butt Welding of Commercially Pure Copper Plates
Karrar, Gihad
Shuaib, A. N.
Al-Badour, F. A.
Merah, N.
Mahgoub, A. K.
PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2014, VOL 2A, 2014,
[9] Friction Stir Welding of aluminium based composites reinforced with Al2O3 particles
Ceschini, L.
Boromei, I.
Gambaro, C.
Minak, G.
Morri, A.
Tarterini, F.
THERMEC 2009, PTS 1-4, 2010, 638-642 : 87 - +
[10] Friction stir welding of constrained groove pressed Al1050 using Al2O3 nanoparticles
Keshavarz, Hossein
Moosavi, Seyyed Ezzatollah
Kazeminezhad, Mohsen
Movahedi, Mojtaba
JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2024, 32 : 597 - 608

← 1 2 3 4 5 →