Dual functions of TiC nanoparticles on tribological performance of Al/graphite composites

被引:37
|
作者
Fallandoost, Hamid [1 ]
Nouri, Alireza [2 ]
Azimi, Amin [1 ]
机构
[1] KN Toosi Univ Technol, Fac Mech Engn, Tehran, Iran
[2] Univ Toronto, Inst Biomat & Biomed Engn, Toronto, ON M5S 3G9, Canada
关键词
Aluminum; TiC; Graphite; Composite; Tribology; SLIDING WEAR BEHAVIOR; MATRIX COMPOSITES; POWDER-METALLURGY; GRAPHITE; MICROSTRUCTURE; COMPRESSIBILITY; CONSOLIDATION; FRICTION;
D O I
10.1016/j.jpcs.2016.02.020
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
In this study, the effect of TiC nanoparticles as a reinforcement on the mechanical and tribological properties of Aluminum-based self lubricating composite was investigated. The microstructure, relative density, hardness, and tribological properties of Al/graphite and Al/TiC/graphite composites were examined as a function of graphite content. The tribo-surfaces of the samples were analyzed using SEM and EDS elemental mapping. The results indicated that the addition of TiC nanoparticles not only decreased the wear rate and coefficient of friction of the composites, but also facilitated the formation of a stable graphite layer at longer sliding distances and high sliding velocities by forming a durable graphite/TiC composite on the tribo-surface. Therefore, the stability of graphite layer can be considered as a possible cause for decrease in wear rate of the Al/TiC/graphite composite. Crown Copyright (C) 2016 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:137 / 144
页数:8
相关论文
共 50 条
  • [31] Pressureless sintering and tribological properties of in-situ TiC-Ni3(Al,Ti)/Ni(Al,Ti) composites
    Chiker, Nabil
    Benamor, Abdessabour
    Haddad, Adel
    Hadji, Youcef
    Hakem, Maamar
    Badji, Riad
    Labaiz, Mohamed
    Azzaz, Mohamed
    Hadji, Mohamed
    INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2021, 98
  • [32] SHS of TiC–Graphite Porous Composites and Carbon Graphitization
    E. R. Umerov
    A. P. Amosov
    E. I. Latukhin
    V. A. Novikov
    International Journal of Self-Propagating High-Temperature Synthesis, 2025, 34 (1) : 42 - 49
  • [33] Effect of graphite and granite dust particulates as micro-fillers on tribological performance of Al 6061-T6 hybrid composites
    Pai, Anand
    Sharma, Sathya Shankar
    D'Silva, Raynor Errol
    Nikhil, R. G.
    TRIBOLOGY INTERNATIONAL, 2015, 92 : 462 - 471
  • [34] Effect of weight percentage of TiC on their tribological properties of magnesium composites
    Narayanasamy, P.
    Selvakumar, N.
    Balasundar, P.
    MATERIALS TODAY-PROCEEDINGS, 2018, 5 (02) : 6570 - 6578
  • [35] EXPERIMENTAL INVESTIGATIONS ON THE INFLUENCE OF TiC/GRAPHITE REINFORCEMENT IN WEAR BEHAVIOR OF Al 6061HYBRID COMPOSITES
    Jeyaprakasam, S.
    Venkatachalam, R.
    Velmurugan, C.
    SURFACE REVIEW AND LETTERS, 2019, 26 (04)
  • [36] Explosive Synthesis and Tribological Performance of Graphite Coated Metal (Fe, Co, Ni) Nanoparticles
    Xiang Junxiang
    Ning, Luo
    Ma Zhanguo
    Tao, Shen
    RARE METAL MATERIALS AND ENGINEERING, 2019, 48 (05) : 1682 - 1686
  • [37] Investigation of Microstructural, Mechanical and Tribological Properties of Al8011-TiC Metal Matrix Nano-Composites
    Palanichamy R.
    Lakshmipathy J.
    Raju M.
    Paulraj A.
    Sivakumar J.
    Sathiyavelu V.
    International Journal of Vehicle Structures and Systems, 2022, 14 (03) : 323 - 327
  • [38] Tribological Performance of M50-Ag-TiC Self-Lubricating Composites at Elevated Temperature
    Zhou, Hongyan
    Shi, Xiaoliang
    Huang, Yuchun
    Liu, Xiyao
    Li, Ben
    JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2018, 27 (07) : 3731 - 3741
  • [39] Tribological Performance of M50-Ag-TiC Self-Lubricating Composites at Elevated Temperature
    Hongyan Zhou
    Xiaoliang Shi
    Yuchun Huang
    Xiyao Liu
    Ben Li
    Journal of Materials Engineering and Performance, 2018, 27 : 3731 - 3741
  • [40] Tribological Performance of Hybrid PTFE/Nano-EG Composites Reinforced with Nanoparticles
    Jia, Zhining
    Yang, Yulin
    Fan, Bingli
    APPLIED MECHANICS AND MECHANICAL ENGINEERING, PTS 1-3, 2010, 29-32 : 395 - +