High-speed compulsator stator thermal management

被引:16
|
作者
Liu, HP [1 ]
Hahne, JJ [1 ]
机构
[1] Univ Texas, Ctr Electromech, Austin, TX 78758 USA
关键词
compulsator; transposed conductor wire bundles; stator armature winding cooling;
D O I
10.1109/TMAG.2002.806414
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The compulsator stator armature winding includes multiple conductor layers. Each conductor layer is made of insulation wraps and transposed aluminum litz wire bundles with epoxy potting compound between the wires and the wire bundles. For a typical pulse-duty application, based on a room-temperature electrical loss calculation, the temperature rise in the aluminum winding is approximately 30 degreesC per shot. Adequate active cooling must be provided such that the stator insulation can survive thermally under a certain pulse repetition rate. The thermal management is quite challenging since the heat loss in the litz wires needs to be conducted through multiple insulations before reaching the coolant passages. As a result of the low equivalent thermal conductivities of the stator winding in the transverse direction, without compromising the overall structural integrity of the winding, the coolant passages have to be allocated as close as possible to the heat sources. For a given electric gun firing mission, four different cooling configurations have been investigated and analyzed by using water ethylene glycol mixture as an active liquid coolant. In this paper, thermal analysis cooling parameters, transient stator winding temperature distributions, and hot-spot temperature histories are presented, discussed, and compared.
引用
收藏
页码:357 / 361
页数:5
相关论文
共 50 条
  • [21] HIGH-SPEED BATTERY OPERATED THERMAL PRINTER
    WATANABE, S
    FUNADA, K
    YAMAJI, S
    FUJITSU SCIENTIFIC & TECHNICAL JOURNAL, 1992, 28 (04): : 524 - 531
  • [22] THERMAL MODELING OF HIGH-SPEED INDUCTION MACHINES
    SAARI, J
    ACTA POLYTECHNICA SCANDINAVICA-ELECTRICAL ENGINEERING SERIES, 1995, (82): : 1 - &
  • [23] Thermal model of high-speed spindle units
    Igor Alexeevich Zverev
    In-Ung Eun
    Won Jee Chung
    Choon Man Lee
    KSME International Journal, 2003, 17 : 668 - 678
  • [24] High-Speed Visualization of Thermal Plasma Characteristics
    Watanabe, T.
    Hashizume, T.
    Imatsuji, T.
    Tanaka, M.
    SELECTED PAPERS FROM THE 31ST INTERNATIONAL CONGRESS ON HIGH-SPEED IMAGING AND PHOTONICS, 2017, 10328
  • [25] Splits of windage losses in integrated transient rotor and stator thermal analysis of a high-speed alternator during multiple discharges
    Liu, HP
    Hearn, CS
    Werst, MD
    Hahne, JJ
    Bogard, D
    2004 12TH SYMPOSIUM ON ELECTROMAGNETIC LAUNCH TECHNOLOGY, 2004, : 217 - 222
  • [26] Splits of windage losses in integrated transient rotor and stator thermal analysis of a high-speed alternator during multiple discharges
    Liu, HP
    Hearn, CS
    Werst, MD
    Hahne, JJ
    Bogard, D
    IEEE TRANSACTIONS ON MAGNETICS, 2005, 41 (01) : 311 - 315
  • [27] HIGH-SPEED MANAGEMENT FOR THE HIGH-TECH AGE
    FRAKER, S
    FORTUNE, 1984, 109 (05) : 62 - &
  • [28] A Study on New High-Speed Motor That Has Stator Decreased in Weight and Coreloss
    Song, Si-Woo
    Yang, In-Jun
    Lee, Seung-Hyeon
    Kim, Dong-Ho
    Kim, Kwang Soo
    Kim, Won-Ho
    IEEE TRANSACTIONS ON MAGNETICS, 2021, 57 (02)
  • [29] Failure and redesign of a high-speed pump with respect to rotor-stator interaction
    Olimstad, Grunde
    Ostby, Petter Thorvald Krogh
    ENGINEERING FAILURE ANALYSIS, 2019, 104 : 704 - 713
  • [30] Study of a Novel High-Speed Compensated Pulsed Alternator With Multistage Stator Cores
    Yang, Jiangtao
    Ye, Caiyong
    Liang, Xin
    Xiong, Fei
    IEEE TRANSACTIONS ON PLASMA SCIENCE, 2019, 47 (05) : 2376 - 2381