The Friction and Wear Properties of Thermoplastic PA6 Composites Filled with Carbon Fiber

被引：20
|
作者：
Li, J. [1 ]
Xia, Y. C. [1 ]
机构：
[1] Shanghai Second Polytech Univ, Sch Mech & Elect Engn, Shanghai 201209, Peoples R China
来源：
JOURNAL OF THERMOPLASTIC COMPOSITE MATERIALS | 2010年 / 23卷 / 03期
关键词：
tribological; polyamide; 6; SEM; TRIBOLOGICAL BEHAVIOR; MECHANICAL-PROPERTIES; ABRASIVE WEAR; PTFE; PERFORMANCE; DRY; COATINGS; STEEL; OXIDE;
D O I：
10.1177/0892705708103397
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
The tribological performance of PA6 and carbon fiber reinforced polyamide 6 (CF/PA6) under dry sliding condition was examined. Different contents of carbon fibers were employed as reinforcement. All filled and unfilled polyamide 6 composites were tested against CGr15 ball and representative testing was performed. The effects of carbon fiber content on tribological properties of the composites were investigated. The worn surface morphologies of neat PA6 and its composites were examined by scanning electron microscopy and the wear mechanisms were discussed. Moreover, all filled polyamide 6 have superior tribological characteristics to unfilled polyamides 6. The optimum wear reduction was obtained when the content of carbon fiber is 20 vol%.
引用
收藏
页码：337 / 349
页数：13
相关论文
共 50 条
  • [31] Abrasive Wear Volume Maps for PA6 and PA6 Composites Under Dry Working Condition
    A. Mimaroglu
    U. Sen
    H. Unal
    Applied Composite Materials, 2008, 15 : 13 - 25
  • [32] Abrasive wear volume maps for PA6 and PA6 composites under dry working condition
    Mimaroglu, A.
    Sen, U.
    Unal, H.
    APPLIED COMPOSITE MATERIALS, 2008, 15 (01) : 13 - 25
  • [33] Effect of surface treatment on interface properties of carbon fiber reinforced PA6 composites during overmolding
    Kang, Dongxu
    Qin, Yinle
    Zhang, Xiaoyang
    Han, Keqing
    Cheng, Lele
    Zhang, Yichen
    Sun, Zeyu
    Dai, Jinyin
    Yu, Muhuo
    POLYMER COMPOSITES, 2025, 46 (01) : 530 - 546
  • [34] The tensile properties of HNO3-treated carbon fiber reinforced ABS/PA6 composites
    Li, J.
    Zhang, Y. F.
    SURFACE AND INTERFACE ANALYSIS, 2009, 41 (07) : 610 - 614
  • [35] Study of the effective parameters on mechanical and electrical properties of carbon black filled PP/PA6 microfibrillar composites
    Naficy, Sina
    Garmabi, Hamid
    COMPOSITES SCIENCE AND TECHNOLOGY, 2007, 67 (15-16) : 3233 - 3241
  • [36] Friction and wear properties of carbon fiber reinforced polypropylene composites
    Li, Jian
    Cai, Chilan
    MATERIALS AND DESIGN, PTS 1-3, 2011, 284-286 : 2380 - 2383
  • [37] Friction and wear properties of UHMWPE composites reinforced with carbon fiber
    Xiong, DS
    MATERIALS LETTERS, 2005, 59 (2-3) : 175 - 179
  • [38] Effect of amorphous carbon coating of carbon fiber on mechanical properties of carbon fiber reinforced PA6
    Tanaka K.
    Habe R.
    Katayama T.
    Nakatsuka K.
    Zairyo/Journal of the Society of Materials Science, Japan, 2020, 69 (05) : 365 - 372
  • [39] Wear and friction of aramid fiber and polytetrafluoroethylene filled composites
    Bolvari, A
    Glenn, S
    Janssen, R
    Ellis, C
    WEAR, 1997, 203 : 697 - 702
  • [40] FRICTION AND WEAR OF CARBON FIBER REINFORCED THERMOPLASTIC POLYMERS
    MIYAKE, S
    KATAYAMA, Y
    JOURNAL OF JAPAN SOCIETY OF LUBRICATION ENGINEERS, 1973, 18 (05): : 404 - 412
12345