Electrophoretic deposition for fabrication of ceramic microparts

被引：12
|
作者：
Bonnas, Sylvia [1 ,2 ]
Ritzhaupt-Kleissl, Hans-Joachim [2 ]
Hausselt, Juergen [1 ,2 ]
机构：
[1] Univ Freiburg, Lab Mat Proc, Dept Microsyst Engn IMTEK, D-79110 Freiburg, Germany
[2] Forschungszentrum Karlsruhe, Inst Mat Res 3, D-76021 Karlsruhe, Germany
来源：
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2010年 / 30卷 / 05期
关键词：
Electrophoretic deposition; Microparts; Shaping; Suspensions; ZrO2; Structural applications; SUSPENSIONS;
D O I：
10.1016/j.jeurceramsoc.2009.06.039
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Electrophoretic deposition (EPD) is mostly used for producing moulds and layers. The present work shows the fabrication of ceramic microparts by the use of structured electrodes. As electrode structures euro coins and spinning nozzles were used. Additionally a cost effective and simple method was developed, which allows preserving the original master mould by using microstructured silicone moulds as substrate. This was enabled by coating the silicone moulds with graphite to obtain an electrically conductive surface, required for electrophoretic deposition. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1159 / 1162
页数：4
相关论文
共 50 条
  • [41] Ceramic coatings on carbon and metallic fibres by electrophoretic deposition
    Boccaccini, AR
    Schindler, U
    Krüger, HG
    MATERIALS LETTERS, 2001, 51 (03) : 225 - 230
  • [42] Fabrication of Ba0.6Sr0.4TiO3 ceramic thick film by electrophoretic deposition process
    Wang Xili
    Xue Hao
    Zhou Heping
    RARE METAL MATERIALS AND ENGINEERING, 2007, 36 : 935 - 938
  • [43] Fabrication of SiOC Ceramic Microparts and Patterned Structures from Polysiloxanes via Liquid Cast and Pyrolysis
    Liu, Xiang
    Li, Ya-Li
    Hou, Feng
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2009, 92 (01) : 49 - 53
  • [44] Functionally graded ceramic and ceramic-metal composites shaped by electrophoretic deposition
    Put, S
    Vleugels, J
    Anné, G
    Van der Biest, O
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2003, 222 (1-3) : 223 - 232
  • [45] Study on micromachine tools in fabrication of microparts
    Liang, Yingchun
    Zhao, Yan
    Bai, Qingshun
    Wang, Shumei
    Wang, Bo
    Chen, Mingjun
    Dou, Jianhua
    2006 1ST IEEE INTERNATIONAL CONFERENCE ON NANO/MICRO ENGINEERED AND MOLECULAR SYSTEMS, VOLS 1-3, 2006, : 856 - +
  • [46] Fabrication of micromechanical structures of titania and titanium with electrophoretic deposition
    Marquordt, C
    Allen, MG
    TRANSDUCERS '01: EUROSENSORS XV, DIGEST OF TECHNICAL PAPERS, VOLS 1 AND 2, 2001, : 616 - 619
  • [47] Fabrication of Tailored Powder Structures by Electrophoretic Deposition and Sintering
    Olevsky, Eugene
    Wang, Xuan
    HIGH-PERFORMANCE CERAMICS VI, 2010, 434-435 : 757 - 760
  • [48] Fabrication of polystyrene colloidal crystal film by electrophoretic deposition
    Tran, Giang T. H.
    Koike, Masaki
    Uchikoshi, Tetsuo
    Fudouzi, Hiroshi
    ADVANCED POWDER TECHNOLOGY, 2020, 31 (08) : 3085 - 3092
  • [49] Fabrication of SiCf/SiC Composites using an Electrophoretic Deposition
    Lee, Jong-Hyun
    Gil, Gun-Young
    Yoon, Dang-Hyok
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2009, 46 (05) : 447 - 451
  • [50] Fabrication of small tubular SOFCs by electrophoretic deposition technique
    Negishi, H
    Sakai, N
    Yamaji, K
    Horita, T
    Yokokawa, H
    SOLID OXIDE FUEL CELLS (SOFC VI), 1999, 99 (19): : 885 - 892
12345