Electrophoretic deposition for fabrication of ceramic microparts

被引：12
|
作者：
Bonnas, Sylvia [1 ,2 ]
Ritzhaupt-Kleissl, Hans-Joachim [2 ]
Hausselt, Juergen [1 ,2 ]
机构：
[1] Univ Freiburg, Lab Mat Proc, Dept Microsyst Engn IMTEK, D-79110 Freiburg, Germany
[2] Forschungszentrum Karlsruhe, Inst Mat Res 3, D-76021 Karlsruhe, Germany
来源：
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY | 2010年 / 30卷 / 05期
关键词：
Electrophoretic deposition; Microparts; Shaping; Suspensions; ZrO2; Structural applications; SUSPENSIONS;
D O I：
10.1016/j.jeurceramsoc.2009.06.039
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Electrophoretic deposition (EPD) is mostly used for producing moulds and layers. The present work shows the fabrication of ceramic microparts by the use of structured electrodes. As electrode structures euro coins and spinning nozzles were used. Additionally a cost effective and simple method was developed, which allows preserving the original master mould by using microstructured silicone moulds as substrate. This was enabled by coating the silicone moulds with graphite to obtain an electrically conductive surface, required for electrophoretic deposition. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：1159 / 1162
页数：4
相关论文
共 50 条
  • [1] Fabrication of ceramic membranes on porous ceramic supports by electrophoretic deposition
    Uchikoshi, T.
    Kreethawate, L.
    Matsunaga, C.
    Larpkiattaworn, S.
    Jiemsirilers, S.
    Besra, L.
    ADVANCES IN APPLIED CERAMICS, 2014, 113 (01) : 3 - 7
  • [2] The use of electrophoretic deposition for the fabrication of ceramic and glass matrix composites
    Boccaccini, AR
    Kaya, C
    ADVANCES IN CERAMIC MATRIX COMPOSITES IX, 2003, 153 : 57 - 66
  • [3] Electrophoretic Deposition of Ceramic Nanoparticles
    Wu, Kangmin
    Zhitomirsky, Igor
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2011, 8 (04) : 920 - 927
  • [4] Electrophoretic deposition of ceramic materials
    Boccaccini, Aldo R.
    Ferrari, Begona
    ADVANCES IN APPLIED CERAMICS, 2014, 113 (01) : 1 - 2
  • [5] Electrophoretic deposition of ceramic powders
    Zhang, SH
    Sorrel, CC
    Li, FY
    JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2005, 21 : 107 - 110
  • [6] Effects of solid loading on the fabrication of ceramic microparts by soft molding
    Su, Bo
    Meng, Junhu
    Zhang, Zhaozhu
    Yang, Zidong
    Wang, Honggang
    CERAMICS INTERNATIONAL, 2017, 43 (02) : 2221 - 2225
  • [7] Preparation of heterocoagulated colloidal suspensions for fabrication of ceramic matrix composites by electrophoretic filtration deposition
    Kaya, C
    Trusty, PA
    Ponton, CB
    BRITISH CERAMIC TRANSACTIONS, 1998, 97 (02): : 48 - 54
  • [8] Fabrication technologies for oxide-oxide ceramic matrix composites based on electrophoretic deposition
    Stoll, E
    Mahr, P
    Krüger, HG
    Kern, H
    Thomas, BJC
    Boccaccini, AR
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2006, 26 (09) : 1567 - 1576
  • [9] Electrophoretic deposition of ceramic coatings on ceramic composite substrates
    Kaya, C
    Kaya, F
    Atiq, S
    Boccaccini, AR
    BRITISH CERAMIC TRANSACTIONS, 2003, 102 (03): : 99 - 102
  • [10] Electrophoretic deposition of PZT ceramic films
    Sweeney, T
    Whatmore, RW
    ISAF '96 - PROCEEDINGS OF THE TENTH IEEE INTERNATIONAL SYMPOSIUM ON APPLICATIONS OF FERROELECTRICS, VOLS 1 AND 2, 1996, : 193 - 196
12345