Analysis of compression ignition combustion in a Schnurle-type gasoline engine - Comparison of performance between direct injection and port injection systems

被引:2
|
作者
Kim, SW
Moriyoshi, Y
机构
[1] Chiba Univ, Grad Sch Sci & Technol, Inage Ku, Chiba 2638522, Japan
[2] Chiba Univ, Dept Elect & Mech Engn, Inage Ku, Chiba 2638522, Japan
来源
KSME INTERNATIONAL JOURNAL | 2004年 / 18卷 / 08期
关键词
gasoline engine; compression-ignition engine; two-stroke engine; fuel injection; homogeneous charge compression ignition;
D O I
10.1007/BF02984258
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
A two-stroke Schnurle-type gasoline engine was modified to enable compression-ignition in both the port fuel injection and the in-cylinder direct injection. Using the engine, examinations of compression-ignition operation and engine performance tests were carried out. The amount of the residual gas and the in-cylinder mixture conditions were controlled by varying the valve angle rate of the exhaust valve (VAR) and the injection timing for direct injection conditions. It was found that the direct injection system is superior to the port injection system in terms of exhaust gas emissions and thermal efficiency, and that almost the same operational region of compression-ignition at medium speeds and loads was attained. Some interesting combustion characteristics, such as a shorter combustion period in higher engine speed conditions, and factors for the onset of compression-ignition were also examined.
引用
收藏
页码:1451 / 1460
页数:10
相关论文
共 50 条
  • [21] Investigation on Performance and Emissions of Ethanol Direct Injection Plus Gasoline Port Injection Engine
    Kang R.
    Feng D.
    Wei H.
    Hua J.
    Zhou L.
    Neiranji Xuebao/Transactions of CSICE (Chinese Society for Internal Combustion Engines), 2019, 37 (01): : 25 - 31
  • [22] The Influence of Hydrogen Direct Injection on the Combustion Characteristics of a Compression Ignition Engine
    Aghahasani, Mahdi
    Gharehghani, Ayat
    Andwari, Amin Mahmoudzadeh
    Konno, Juho
    CONFERENCE ON THERMO-AND FLUID DYNAMICS OF CLEAN PROPULSION POWERPLANTS, THIESEL 2022, 2022,
  • [23] Effects of water direct injection on a combustion phase and performance of six-stroke gasoline homogeneous charge compression ignition engine
    Shin, Woo Jae
    Song, Han Ho
    FUEL, 2024, 356
  • [24] MODELLING OF THE INJECTION AND COMBUSTION PROCESSES IN THE GASOLINE DIRECT INJECTION ENGINE
    Cygnar, Mariusz
    Budzik, Grzegorz
    Grzelka, Miroslaw
    Marciniak-Podsadna, Lidia
    Sendyka, Bronislaw
    Samardzic, Ivan
    TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2014, 21 (04): : 867 - 872
  • [25] COMBUSTION ANALYSIS OF ALGAL OIL METHYL ESTER IN A DIRECT INJECTION COMPRESSION IGNITION ENGINE
    Hariram, V.
    Kumar, G. Mohan
    JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2013, 8 (01) : 77 - 92
  • [26] Modelling of the injection and combustion processes in the gasoline direct injection engine
    Modeliranje procesa ubrizgavanja i izgaranja kod motora s direktnim ubrizgavanjem
    1600, Strojarski Facultet (21):
  • [27] Effect of HHO addition on combustion and emission in SI engine with butanol direct injection and gasoline port injection
    Zhao, Zhe
    Huang, Yan
    Yu, Xiumin
    Sun, Ping
    Li, Ming
    Shi, Weibo
    Guo, Zezhou
    Wang, Tianqi
    CASE STUDIES IN THERMAL ENGINEERING, 2023, 42
  • [28] Investigation to charge cooling effect and combustion characteristics of ethanol direct injection in a gasoline port injection engine
    Huang, Yuhan
    Hong, Guang
    Huang, Ronghua
    APPLIED ENERGY, 2015, 160 : 244 - 254
  • [29] Understanding the performance of the multiple injection gasoline partially premixed combustion concept implemented in a 2-Stroke high speed direct injection compression ignition engine
    Benajes, J.
    Martin, J.
    Novella, R.
    Thein, K.
    APPLIED ENERGY, 2016, 161 : 465 - 475
  • [30] COMBUSTION ANALYSIS OF A CNG DIRECT INJECTION SPARK IGNITION ENGINE
    Aziz, A. Rashid A.
    Firmansyah
    Shahzad, Raja
    INTERNATIONAL JOURNAL OF AUTOMOTIVE AND MECHANICAL ENGINEERING, 2010, 2 (01) : 157 - 170