Two-body abrasive behavior of brake pad dry sliding against interpenetrating network ceramics/Al-alloy composites

被引：15

作者：

Zhang, S. Y. ^{[1
]}

Qu, S. G. ^{[1
]}

Li, Y. Y. ^{[1
]}

Chen, W. P. ^{[1
]}

机构：

[1] S China Univ Technol, Sch Mech & Automot Engn, Guangdong Key Lab Adv Metall Mat Proc, Guangzhou 510640, Peoples R China

来源：

WEAR | 2010年 / 268卷 / 7-8期

关键词：

Brake pad; Interpenetrating network composites; Friction; Wear; METAL-MATRIX-COMPOSITES; FRICTION; WEAR;

D O I：

10.1016/j.wear.2009.12.004

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

Interpenetrating network composites containing 56 vol % foam ceramics and 44 vol % Al-alloy were fabricated in place of the conventional cast iron used for brake rotors Experimental studies on phenolic resin brake pad dry sliding against the composites were performed on an Optimol SRV testing machine in order to examine the effect of temperature and load on friction and wear performances Friction fade took place at high temperatures followed by overrecovery upon cooling. Wear showed an incremental tendency with temperature thanks to thermal decomposition of the resin. For applied loads from 32 N to 128 N. the friction and wear increased at 100 C and 250 C, whereas the former friction and wear were inferior to the latter, respectively Topographic examination of the worn pad surfaces using scanning electron microscopy revealed that the pad two-body abrasion predominated over its three-body abrasion in determining the friction and wear (C) 2009 Elsevier B V All rights reserved

引用

页码：939 / 945

页数：7

共 48 条

[31] Effect of vanadium alloying on microstructure and wear behavior of two-body abrasive particles of Fe-5.5 wt% B surfacing alloy
Zhuang, Minghui
Li, Xiaoxia
Ma, Zhen
Xiong, Xin
Yuan, Shidan
Li, Hongbo
MATERIALS TODAY COMMUNICATIONS, 2022, 33
[32] Dry Sliding Wear Behavior of 2218 Al-Alloy-Al2O3(TiO2) Hybrid Composites
Tirth, Vineet
JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2018, 140 (02):
[33] Investigation on two-body abrasive wear behavior and mechanism of Fe-3.0 wt% B cast alloy with different chromium content
Jian, Yongxin
Huang, Zhifu
Xing, Jiandong
Liu, Xiaoting
Sun, Liang
Zheng, Baochao
Wang, Yong
WEAR, 2016, 362 : 68 - 77
[34] Experimental Investigation and Analysis of Properties and Dry Sliding Wear Behavior of Al -Fe-Si Alloy Matrix Composites
Sakthivelu, S.
Sethusundaram, P. P.
Ravichandran, M.
Meignanamoorthy, M.
SILICON, 2021, 13 (04) : 1285 - 1294
[35] Experimental Investigation and Analysis of Properties and Dry Sliding Wear Behavior of Al -Fe-Si Alloy Matrix Composites
S. Sakthivelu
P. P. Sethusundaram
M. Ravichandran
M. Meignanamoorthy
Silicon, 2021, 13 : 1285 - 1294
[36] Dry sliding friction and wear behavior of bronze matrix composites reinforced with Ni3Al particles: Comparison with conventional brake lining
Celikyurek, Ibrahim
Bicer, Aytac
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2016, 107 (09) : 835 - 841
[37] Comparison of friction and wear performances of brake materials containing different amounts of ZrSiO4 dry sliding against SiCp reinforced Al matrix composites
Zhang, Shaoyang
Wang, Fuping
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 443 (1-2): : 242 - 247
[38] Third Body Behavior During Dry Sliding of Cold-Sprayed Al-Al2O3 Composites: In Situ Tribometry and Microanalysis
J. Michael Shockley
S. Descartes
E. Irissou
J.-G. Legoux
R. R. Chromik
Tribology Letters, 2014, 54 : 191 - 206
[39] Third Body Behavior During Dry Sliding of Cold-Sprayed Al-Al2O3 Composites: In Situ Tribometry and Microanalysis
Shockley, J. Michael
Descartes, S.
Irissou, E.
Legoux, J. -G.
Chromik, R. R.
TRIBOLOGY LETTERS, 2014, 54 (02) : 191 - 206
[40] Mechanical and dry sliding wear behavior of cenosphere particulate reinforced Al-Si12 matrix alloy composites produced by squeeze casting
Bera, Tanusree
Acharya, S. K.
PROCEEDINGS OF ASIA INTERNATIONAL CONFERENCE ON TRIBOLOGY 2018 (ASIATRIB 2018), 2018, : 125 - 126

← 1 2 3 4 5 →