Investigation into constitutive and fracture modeling of hot stamped parts with multiphase

被引：0
|
作者：
Wang, Zijian [1 ]
Xiang, Chongchen [1 ]
Zhang, Yisheng [2 ]
机构：
[1] Soochow Univ, Sch Iron & Steel, Suzhou, Jiangsu, Peoples R China
[2] Huazhong Univ Sci & Technol, State Key Lab Mat Proc & Die & Mould Technol, Wuhan, Hubei, Peoples R China
来源：
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES | 2022年 / 29卷 / 23期
基金：
中国国家自然科学基金;
关键词：
Constitutive model; fracture model; liner criterion; parameters optimization; representative volume element (RVD); tailored properties;
D O I：
10.1080/15376494.2021.1898704
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The constitutive and fracture models of single-phase structure have been obtained by combining simulation and experiment. Mechanical properties of multiphase are predicted using the liner-mixture rule and representative volume element (RVE) method. The results show that the stress calculated by the linear criterion is always higher and the curve obtained by the RVE model matches better with the experimental value. The fracture strain predicted by the linear criterion is always higher than the predicted value of the RVE model and experiment, and the prediction accuracy of the RVE model is higher than that of the linear criterion in general.
引用
收藏
页码：3408 / 3420
页数：13
相关论文
共 50 条
  • [41] Multi-regression modeling for springback effect on automotive body in white stamped parts
    Bashah, Nagur Aziz Kamal
    Muhamad, Norhamidi
    Deros, Baba Md
    Zakaria, Ahmad
    Ashari, Shaharum
    Mobin, Achmed
    Lazat, Mohd Safuan Mohd Abdul
    MATERIALS & DESIGN, 2013, 46 : 175 - 190
  • [42] Metal forming - Challenges in constitutive and fracture modeling
    Yoon, Jeong Whan
    INTERNATIONAL JOURNAL OF PLASTICITY, 2015, 75 : 1 - 1
  • [43] Investigation on laser welding of a novel hot-stamped steel with 2000 MPa
    Lu, Li
    Liang, Zhenxin
    Yang, Jia
    Sun, Qian
    Zhu, Tiancai
    Wang, Xiaonan
    JOURNAL OF MATERIALS RESEARCH AND TECHNOLOGY-JMR&T, 2020, 9 (06): : 13147 - 13152
  • [44] Estimation of Final Shape of Hot-Stamped Parts by Coupling CAE between Forming and Phase Transformation
    Nomura, Naruhiko
    Kubo, Masahiro
    Nakata, Masahiro
    MATERIALS TRANSACTIONS, 2024, 65 (02) : 144 - 151
  • [45] Numerical and experimental investigations on mechanical trimming process for hot stamped ultra-high strength parts
    Han, Xianhong
    Yang, Kun
    Ding, Yanan
    Tan, Shulin
    Chen, Jun
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2016, 234 : 158 - 168
  • [46] Control over Mechanical Properties and Microstructure of BR1500HS Hot-stamped Parts
    Bai-liang Zhuang
    Zhong-de Shan
    Chao Jiang
    Xin-ya Li
    Journal of Iron and Steel Research International, 2014, 21 : 606 - 613
  • [47] Control over Mechanical Properties and Microstructure of BR1500HS Hot-stamped Parts
    Bai-liang ZHUANG
    Zhong-de SHAN
    Chao JIANG
    Xin-ya LI
    JournalofIronandSteelResearch(International), 2014, 21 (06) : 606 - 613
  • [48] Numerical modeling of deformation and fracture of a multiphase polymer concrete
    Sapozhnikov, S. B.
    Aniskevich, A. N.
    Tsarevskii, V. A.
    MECHANICS OF COMPOSITE MATERIALS, 2006, 42 (06) : 571 - 576
  • [49] Numerical modeling of deformation and fracture of a multiphase polymer concrete
    S. B. Sapozhnikov
    A. N. Aniskevich
    V. A. Tsarevskii
    Mechanics of Composite Materials, 2006, 42 : 571 - 576
  • [50] Control over Mechanical Properties and Microstructure of BR1500HS Hot-stamped Parts
    Zhuang, Bai-liang
    Shan, Zhong-de
    Jiang, Chao
    Li, Xin-ya
    JOURNAL OF IRON AND STEEL RESEARCH INTERNATIONAL, 2014, 21 (06) : 606 - 613
12345