Investigation into constitutive and fracture modeling of hot stamped parts with multiphase

被引：0
|
作者：
Wang, Zijian [1 ]
Xiang, Chongchen [1 ]
Zhang, Yisheng [2 ]
机构：
[1] Soochow Univ, Sch Iron & Steel, Suzhou, Jiangsu, Peoples R China
[2] Huazhong Univ Sci & Technol, State Key Lab Mat Proc & Die & Mould Technol, Wuhan, Hubei, Peoples R China
来源：
MECHANICS OF ADVANCED MATERIALS AND STRUCTURES | 2022年 / 29卷 / 23期
基金：
中国国家自然科学基金;
关键词：
Constitutive model; fracture model; liner criterion; parameters optimization; representative volume element (RVD); tailored properties;
D O I：
10.1080/15376494.2021.1898704
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The constitutive and fracture models of single-phase structure have been obtained by combining simulation and experiment. Mechanical properties of multiphase are predicted using the liner-mixture rule and representative volume element (RVE) method. The results show that the stress calculated by the linear criterion is always higher and the curve obtained by the RVE model matches better with the experimental value. The fracture strain predicted by the linear criterion is always higher than the predicted value of the RVE model and experiment, and the prediction accuracy of the RVE model is higher than that of the linear criterion in general.
引用
收藏
页码：3408 / 3420
页数：13
相关论文
共 50 条
  • [1] Constitutive and fracture models of hot stamped parts with multiphase using digital image correlate technology
    Wang, Zijian
    Xue, Fei
    Zhu, Bin
    Wang, Yilin
    Zhang, Yisheng
    PROCEEDINGS OF THE 17TH INTERNATIONAL CONFERENCE ON METAL FORMING METAL FORMING 2018, 2018, 15 : 1079 - 1086
  • [2] Investigation of Resistance Spot Weld Fracture in Hot Stamped Steels
    O'Keeffe, Cameron
    Butcher, Clifford
    Worswick, Michael
    Malcolm, Skye
    Dykeman, Jim
    Penner, Pavlo
    Yau, Cyrus
    Biro, Elliot
    Soldaat, Ron
    Bernert, Willie
    HOT SHEET METAL FORMING OF HIGH-PERFORMANCE STEEL: CHS2, 6TH INTERNATIONAL CONFERENCE, 2017, 2017, : 565 - 572
  • [3] Constitutive modeling of damage accumulation and fracture in multiphase materials
    Wnuk, MP
    COMPUTER METHODS IN APPLIED MECHANICS AND ENGINEERING, 1998, 151 (3-4) : 587 - 591
  • [4] Study on GISSMO fracture model of hot-stamped Tailored-Tempering-Properties parts
    Qiu, B. Y.
    Wang, Y. L.
    Zhu, B.
    Liu, W.
    Zhang, Y. S.
    Ren, X. Q.
    Ren, X. P.
    43RD INTERNATIONAL DEEP DRAWING RESEARCH GROUP, IDDRG CONFERENCE, 2024, 2024, 1307
  • [5] Numerical modeling of ductile fracture of hot stamped 22MnB5 boron steel parts in three-point bending
    Tang, Bingtao
    Wu, Fangxing
    Guo, Ning
    Liu, Jiyuan
    Ge, Hailong
    Bruschi, Stefania
    Li, Xinsheng
    INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2020, 188
  • [6] Numerical modeling of ductile fracture of hot stamped 22MnB5 boron steel parts in three-point bending
    Tang, Bingtao
    Wu, Fangxing
    Guo, Ning
    Liu, Jiyuan
    Ge, Hailong
    Bruschi, Stefania
    Li, Xinsheng
    International Journal of Mechanical Sciences, 2021, 188
  • [7] SPRAY COOLING OF EARLY EXTRACTED HOT STAMPED PARTS
    Nuernberger, Florian
    Diekamp, Max
    Moritz, Joern
    Wolf, Lars
    Huebner, Sven
    Behrens, Bernd-Arno
    TMS 2014 SUPPLEMENTAL PROCEEDINGS, 2014, : 983 - 990
  • [8] Metallurgical Controlling Factors for the Ductility of Hot Stamped Parts
    Otani, Shigeo
    Kozuka, Masaya
    Murakami, Toshio
    Naito, Junya
    Pichler, Andreas
    Kurz, Thomas
    HOT SHEET METAL FORMING OF HIGH-PERFORMANCE STEEL CHS2 (5TH INTERNATIONAL CONFERENCE), 2015, (05): : 411 - 416
  • [9] Investigation of the influence of forming parameters on the springback of hot-stamped hat-shaped parts
    ChiuHuang, Cheng-Kai
    Wang, Shi-Wei
    Lee, Ping-Kun
    38TH INTERNATIONAL DEEP DRAWING RESEARCH GROUP ANNUAL CONFERENCE (IDDRG 2019), 2019, 651
  • [10] State-of-the-Knowledge on Coating Systems for Hot Stamped Parts
    Fan, Dong Wei
    De Cooman, Bruno C.
    STEEL RESEARCH INTERNATIONAL, 2012, 83 (05) : 412 - 433
12345