Surface characterization and growth mechanism of laminated Ti3SiC2 crystals fabricated by hot isostatic pressing

被引：32
|
作者：
Wu, Qiong [1 ]
Li, Changsheng [1 ]
Tang, Hua [1 ]
机构：
[1] Jiangsu Univ, Sch Mat Sci & Engn, Zhenjiang 212013, Jiangsu, Peoples R China
来源：
APPLIED SURFACE SCIENCE | 2010年 / 256卷 / 23期
关键词：
Ti3SiC2; Hot isostatic pressing; Growth mechanism; DEFORMATION; TEMPERATURE; MORPHOLOGY; CARBIDE;
D O I：
10.1016/j.apsusc.2010.05.012
中图分类号：
O64 [物理化学（理论化学）、化学物理学];
学科分类号：
070304 ; 081704 ;
摘要：
Laminated Ti3SiC2 crystals were prepared by hot isostatic pressing from Ti, Si, C and Al powders with NaCl additive in argon at 1350 degrees C. The morphology and microstructure of Ti3SiC2 crystals were investigated by means of XRD, SEM, and TEM. The high symmetry and crystalline was revealed by high resolution transmission electronic microscope (HRTEM) and selected area electron diffraction (SAED). The growth mechanism of Ti3SiC2 crystals controlled by two-dimensional nucleation was put forward. The growth pattern of layered steps implies that the growth of the (002) face should undergo two steps, the intermittent two-dimensional nucleation and the continuous lateral spreading of layers on growth faces. (C) 2010 Elsevier B.V. All rights reserved.
引用
收藏
页码：6986 / 6990
页数：5
相关论文
共 50 条
  • [21] Microstructure and Mechanical Properties of (TiB2 + SiC) Reinforced Ti3SiC2 Composites Synthesized by In Situ Hot Pressing
    Pan, Limei
    Song, Kai
    Gu, Jian
    Qiu, Tai
    Yang, Jian
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2016, 13 (04) : 629 - 635
  • [22] Synthesis and Sintering of Ti3SiC2–SiC Composites through Reactive Hot-Pressing of TiC and Si Precursors
    Sheida Haji Amiri
    Mahdi Ghassemi Kakroudi
    Nasser Pourmohammadie Vafa
    Mehdi Shahedi Asl
    Silicon, 2022, 14 : 4227 - 4235
  • [23] Preparation and characterization of Ti3SiC2 powder
    Li, H
    Peng, LM
    Gong, M
    Zhao, JH
    He, LH
    Guo, CY
    CERAMICS INTERNATIONAL, 2004, 30 (08) : 2289 - 2294
  • [24] Synthesis of high-purity Ti3SiC2 polycrystals by hot-pressing of the elemental powders
    Luo, YM
    Pan, W
    Li, SQ
    Chen, J
    Wang, RG
    Li, JQ
    MATERIALS LETTERS, 2002, 52 (4-5) : 245 - 247
  • [25] Synthesis of Ti3SiC2 Machinable Ceramics by High-Energy Milling and Hot-Pressing
    Liu Bo-bo
    Wang Fen
    Zhu Jian-feng
    Li Ya-ling
    CHINESE CERAMICS COMMUNICATIONS, 2010, 105-106 : 733 - 735
  • [26] Mechanical properties of synthesized Ti3SiC2 by hot pressing from TiCx/Si powder mixture
    Hwang, SS
    Park, SW
    Kim, TW
    ADVANCED SI-BASED CERAMICS AND COMPOSITES, 2005, 287 : 194 - 199
  • [27] Machinability of Ti3SiC2 with layered structure synthesized by hot pressing mixture of TiCx and Si powder
    Hwang, SungSic
    Lee, Sang Chul
    Han, JaeHo
    Lee, Dongyun
    Park, Sang-Whan
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (12) : 3493 - 3500
  • [28] An investigation of the reaction hot-pressing synthesis of MoSi2/Ti3SiC2/Al composites
    Zhang, J. Y.
    Fu, Z. Y.
    Wang, W. M.
    HIGH-PERFORMANCE CERAMICS IV, PTS 1-3, 2007, 336-338 : 1364 - 1367
  • [29] Synthesis of Ti3SiC2/TiB2 Composite by In-situ Hot Pressing (HP) Method
    Zhou Weibing
    Mei Bingchu
    Zhu Jiaoqun
    JOURNAL OF WUHAN UNIVERSITY OF TECHNOLOGY-MATERIALS SCIENCE EDITION, 2008, 23 (06): : 863 - 865
  • [30] Synthesis of Ti3SiC2/TiB2 composite by in-situ hot pressing (HP) method
    Weibing Zhou
    Bingchu Mei
    Jiaoqun Zhu
    Journal of Wuhan University of Technology-Mater. Sci. Ed., 2008, 23 : 863 - 865
12345