Nitriding response of chromium containing ferritic steels on plasma immersion ion implantation at elevated temperature

被引：0
|
作者：
Blawert, C
Mordike, BL
Rensch, U
Schreiber, G
Oettel, H
机构：
[1] GKSS Forschungszentrum Geesthacht GmbH, Zentrum Magnesiumtechnol, D-21502 Geesthacht, Germany
[2] Tech Univ Clausthal, Inst Werkstoffkunde & Werkstofftech, D-38678 Clausthal Zellerfeld, Germany
[3] Tech Univ Bergakad Freiberg, Inst Metallkunde, D-09596 Freiberg, Germany
来源：
SURFACE ENGINEERING | 2002年 / 18卷 / 04期
关键词：
D O I：
暂无
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The result of nitriding ferritic steels using a PI3 treatment depends strongly on the composition of the steel. For chromium containing steels, an expanded ferrite phase was found for higher chromium contents (about 3(.)6%Cr) under certain treatment conditions. Standard metallography did not reveal any precipitation and the treated surface layer possessed a uniform microstructure. The expanded ferrite phase exhibits high hardness and thus good wear resistance.
引用
收藏
页码：249 / 254
页数：6
相关论文
共 50 条
  • [1] The effect of HV in the nitriding of ferritic steels by plasma immersion ion implantation
    Blawert, C
    Mordike, BL
    Rensch, U
    Oettel, H
    SURFACE & COATINGS TECHNOLOGY, 2001, 142 : 376 - 383
  • [2] Nitriding of austenitic stainless steels using plasma immersion ion implantation
    Mandl, S
    Gunzel, R
    Richter, E
    Moller, W
    SURFACE & COATINGS TECHNOLOGY, 1998, 100 (1-3): : 372 - 376
  • [3] Influence of process parameters on the nitriding of steels by plasma immersion ion implantation
    Blawert, C
    Mordike, BL
    Collins, GA
    Short, KT
    Tendys, J
    SURFACE & COATINGS TECHNOLOGY, 1998, 104 : 240 - 247
  • [4] Structure and properties of stainless steels after plasma immersion ion implantation and plasma nitriding
    Spies, HJ
    Brusky, U
    Mordike, BL
    Blawert, C
    Hübner, VP
    MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK, 1999, 30 (08) : 457 - 464
  • [5] Influence of the material composition on the nitriding result of steels by plasma immersion ion implantation
    Blawert, C
    Mordike, BL
    Rensch, U
    Wunsch, R
    Wiedemann, R
    Oettel, H
    SURFACE & COATINGS TECHNOLOGY, 2000, 131 (1-3): : 334 - 339
  • [6] PLASMA IMMERSION ION-IMPLANTATION OF STEELS
    COLLINS, GA
    HUTCHINGS, R
    TENDYS, J
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1991, 139 : 171 - 178
  • [7] Nitriding of stainless steel and aluminium alloys by plasma immersion ion implantation
    Richter, E
    Günzel, R
    Parasacandola, S
    Telbizova, T
    Kruse, O
    Möller, W
    SURFACE & COATINGS TECHNOLOGY, 2000, 128 : 21 - 27
  • [8] NITRIDING OF SUPER-FERRITIC STAINLESS STEEL BY PLASMA IMMERSION ION IMPLANTATION IN RADIO FREQUENCY AND ECR-MICROWAVE PLASMA SYSTEM
    Bhuyan, H.
    Favre, M.
    Cisternas, M.
    Henriquez, A.
    Wyndham, E.
    Mandl, S.
    Manova, D.
    Walczak, M.
    2015 42ND IEEE INTERNATIONAL CONFERENCE ON PLASMA SCIENCES (ICOPS), 2015,
  • [9] Surface modification of metal alloys by plasma immersion ion implantation and subsequent plasma nitriding
    Kostov, KG
    Ueda, M
    Lepiensky, A
    Soares, PC
    Gomes, GF
    Silva, MM
    Reuther, H
    SURFACE & COATINGS TECHNOLOGY, 2004, 186 (1-2): : 204 - 208
  • [10] NITRIDING OF AUSTENITIC STAINLESS-STEEL BY PLASMA IMMERSION ION-IMPLANTATION
    COLLINS, GA
    HUTCHINGS, R
    SHORT, KT
    TENDYS, J
    LI, X
    SAMANDI, M
    SURFACE & COATINGS TECHNOLOGY, 1995, 74-5 (1-3): : 417 - 424
12345