MPC-BASED steering control for backward-driving vehicle using stereo vision

被引:7
|
作者
Son, Chang-Woo [1 ]
Choi, Wansik [1 ]
Ahn, Changsun [1 ]
机构
[1] Pusan Natl Univ, Sch Mech Engn, Busan 46241, South Korea
关键词
Stereo vision; Autonomous driving; Backward driving; Model predictive control; LOW-COST DESIGN; SYSTEM; OBSTACLE; TRACKING;
D O I
10.1007/s12239-017-0091-8
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
We propose a steering control algorithm for autonomous backward driving in a narrow corridor. Passable spaces are detected using a stereo camera, and the steering angle is controlled by a model predictive controller (MPC). For passable space detection, an UV-disparity map is calculated from the original disparity map. Information regarding passable spaces collected by the stereo camera is used in steering control. Backward driving requires the driver's preemptive actions, which can be learned by experience because of the non-intuitive responses (the initial motion of the vehicle is opposite to the driver's steering angle input). This occurs because a backward-driving vehicle is a non-minimum phase system. One of the most popular steering control algorithms is Stanley method, which is based on the feedback of lateral displacement error and heading angle error. The method is very intuitive and works well for forward driving, but it exhibits significant undershoot for backward driving cases. Furthermore, the method does not explicitly consider any constraints on control inputs and states. We designed a steering controller based on the MPC technique that requires future information but can handle constraints explicitly. Because we have near-future information from the stereo camera under limited passable spaces, MPC can be effectively implemented. We performed several simulations and experiments to show the performance and superiority of the suggested method over a simple feedback-based control algorithm.
引用
收藏
页码:933 / 942
页数:10
相关论文
共 50 条
  • [21] Study on MPC-based Energy Management for a Series Tracked Vehicle
    Wei, Chao
    Wu, Xitao
    Liu, Sicheng
    2019 IEEE 28TH INTERNATIONAL SYMPOSIUM ON INDUSTRIAL ELECTRONICS (ISIE), 2019, : 1898 - 1902
  • [22] MPC-BASED ENERGY MANAGEMENT OF A PARALLEL HYBRID ELECTRIC VEHICLE USING TERRAIN INFORMATION
    Wahba, Mohamed
    Brennan, Sean
    PROCEEDINGS OF THE ASME 8TH ANNUAL DYNAMIC SYSTEMS AND CONTROL CONFERENCE, 2015, VOL 1, 2016,
  • [23] Cascaded Disturbance Compensation for MPC-based Autonomous Vehicle Guidance
    Jalilian, Arash
    Schwarz, Norman
    Voelz, Andreas
    Ritschel, Robert
    2023 31ST MEDITERRANEAN CONFERENCE ON CONTROL AND AUTOMATION, MED, 2023, : 932 - 937
  • [24] An MPC-based Energy Management System for a Hybrid Electric Vehicle
    Serpi, Alessandro
    Porru, Mario
    2020 IEEE VEHICLE POWER AND PROPULSION CONFERENCE (VPPC), 2020,
  • [25] MPC-based yaw and lateral stabilisation via active front steering and braking
    Falcone, Paolo
    Tseng, H. Eric
    Borrelli, Francesco
    Asgari, Jahan
    Hrovat, Davor
    VEHICLE SYSTEM DYNAMICS, 2008, 46 : 611 - 628
  • [26] MPC-based Path Following Design for Automated Vehicles with Rear Wheel Steering
    Yu, Chuanyang
    Zheng, Yanggu
    Shyrokau, Barys
    Ivanov, Valentin
    2021 IEEE INTERNATIONAL CONFERENCE ON MECHATRONICS (ICM), 2021,
  • [27] MPC-based fault tolerant control system for yaw stability of distributed drive electric vehicle
    Shi, Ke
    Yuan, Xiaofang
    2019 3RD CONFERENCE ON VEHICLE CONTROL AND INTELLIGENCE (CVCI), 2019, : 74 - 79
  • [28] MPC-Based Downshift Control of Automated Manual Transmissions
    Xin Li
    Jidong Lyu
    Jinlong Hong
    Jinghua Zhao
    Bingzhao Gao
    Hong Chen
    Automotive Innovation, 2019, 2 : 55 - 63
  • [29] Study on Vehicle Lateral Control for Backward Driving
    Kim, Minsung
    Shin, Seho
    Park, Jaeheung
    2016 13TH INTERNATIONAL CONFERENCE ON UBIQUITOUS ROBOTS AND AMBIENT INTELLIGENCE (URAI), 2016, : 191 - 193
  • [30] Vehicle Backward Driving Control with Obstacle Avoidance
    Son, Chang-Woo
    Ahn, Changsun
    2015 15TH INTERNATIONAL CONFERENCE ON CONTROL, AUTOMATION AND SYSTEMS (ICCAS), 2015, : 1771 - 1774