Discharge coefficient influence on the performance of aerostatic journal bearings

被引:36
|
作者
Neves, M. T. [1 ]
Schwarz, V. A. [1 ]
Menon, G. J. [1 ]
机构
[1] Univ Fed Itajuba, Inst Engn Mech, Itajuba, MG, Brazil
关键词
Aerostatic journal bearing; Orifice discharge coefficient; Load carrying capacity; Externally pressurized; ORIFICE-TYPE RESTRICTOR;
D O I
10.1016/j.triboint.2009.11.001
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Aerostatic journal bearings need externally pressurized air. The discharge coefficient is usually assumed constant for sonic and subsonic flow conditions. However, some authors found that it is variable as a function of the pressure ratio, orifice throat discharge and supply pressures. The present study is a theoretical investigation of the discharge coefficient influence on the performance of aerostatic journal bearings. The Reynolds equation for compressible fluids is solved by the finite element method with triangular linear elements. For 0.5 eccentricity ratio, the bearing load carrying capacity difference is 0.5%, although the bearing total mass flow rate difference is 7.4%. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码:746 / 751
页数:6
相关论文
共 50 条
  • [11] A simplified FEM analysis on the static performance of aerostatic journal bearings with orifice restrictor
    Cui, Hailong
    Gong, Weiwei
    Zheng, Yueqing
    Li, Yifei
    Wang, Wei
    Jiang, Zhengyi
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2021, 235 (07) : 1379 - 1389
  • [12] A simplified FEM analysis on the static performance of aerostatic journal bearings with orifice restrictor
    Cui, Hailong
    Gong, Weiwei
    Zheng, Yueqing
    Li, Yifei
    Wang, Wei
    Jiang, Zhengyi
    Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2021, 235 (07): : 1379 - 1389
  • [13] On the modelling of hybrid aerostatic-gas journal bearings
    Morosi, S.
    Santos, I. F.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART J-JOURNAL OF ENGINEERING TRIBOLOGY, 2011, 225 (J7) : 641 - 653
  • [14] CYCLIC SQUEEZE IN TAPERED LAND AEROSTATIC JOURNAL BEARINGS
    PANDE, SS
    WEAR, 1983, 89 (03) : 273 - 281
  • [15] DESIGN OF AEROSTATIC JOURNAL BEARINGS WITH PARTIALLY POROUS WALLS
    SZWARCMAN, M
    GOREZ, R
    INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1978, 18 (02): : 49 - 58
  • [16] Influence of lubricants on the performance of journal bearings - a review
    Kumar, Sunil
    Kumar, Vijay
    Singh, Anoop Kumar
    TRIBOLOGY-MATERIALS SURFACES & INTERFACES, 2020, 14 (02) : 67 - 78
  • [17] Numerical investigation of journal misalignment on the static and dynamic characteristics of aerostatic journal bearings
    Wang, Xinkuan
    Zhou, Lin
    Huang, Ming
    Yue, Xiaobin
    Xu, Qiao
    MEASUREMENT, 2018, 128 : 314 - 324
  • [18] EFFECT OF SLIP-FLOW ON THE STEADY-STATE PERFORMANCE OF AEROSTATIC POROUS JOURNAL BEARINGS
    SINGH, KC
    RAO, NS
    MAJUMDAR, BC
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 1984, 106 (01): : 156 - 162
  • [19] ANALYSIS OF TAPERED-LAND HYBRID AEROSTATIC JOURNAL BEARINGS
    PANDE, SS
    SOMASUNDARAM, S
    WEAR, 1982, 81 (01) : 97 - 107
  • [20] The seal system in aerostatic journal bearings for high vacuum chambers
    Yoshimoto, S
    Yoshida, Y
    Yagi, K
    JOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, 2004, 126 (02): : 310 - 315