Microstructure and strength of rapidly solidified and extruded Mg-Zn alloys

被引：93
|
作者：
Maeng, DY [1 ]
Kim, TS
Lee, JH
Hong, SJ
Seo, SK
Chun, BS
机构：
[1] Chungnam Natl Univ, Rapidly Solidified Mat Res Ctr, Taejon 305764, South Korea
[2] Taedok Coll, Ind Liason Off 48, Taejon 305715, South Korea
来源：
SCRIPTA MATERIALIA | 2000年 / 43卷 / 05期
关键词：
flake; rapid solidification; cooling rate; twin rolling; precipitation hardening;
D O I：
10.1016/S1359-6462(00)00428-0
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Rapidly solidified Mg-(3,6)wt%Zn binary alloy flakes were manufactured by twin roll process and extruded. Microstructural change of the as solidified flake and the extruded bar was dependent on the composition, cooling rate and heat treating. Grain size was reduced from 125 μm in as cast alloy to 10 μm by rapid solidification, resulting in the hardness increase. Using the secondary dendrite arm spacing in the microstructure of the flake, cooling rate during the twin rolling was calculated as 2×103 K/s. Strength of the both alloy bars was measured to increase by forming MgZn′ precipitates during aging at 473 K for 15 hrs.
引用
收藏
页码：385 / 389
页数：5
相关论文
共 50 条
  • [1] Mechanical properties of rapidly solidified Mg-Zn alloys
    Materials Science Forum, 2000, 350 : 105 - 110
  • [2] Mechanical properties of rapidly solidified Mg-Zn alloys
    Koike, J
    Kawamura, Y
    Hayashi, K
    Suzuki, M
    Maruyama, K
    Inoue, A
    MAGNESIUM ALLOYS 2000, 2000, 350-3 : 105 - 110
  • [3] The relation between microstructure and corrosion properties of extruded Mg-Zn base alloys
    Ben-Hamu, G.
    Eliezer, D.
    Shin, K. S.
    MAGNESIUM TECHNOLOGY 2007, 2007, : 317 - +
  • [4] Microstructure and corrosion behavior of rapidly solidified Mg-Zn-Y alloys
    Nam, S. W.
    Kim, W. T.
    Kim, D. H.
    Kim, T. S.
    METALS AND MATERIALS INTERNATIONAL, 2013, 19 (02) : 205 - 209
  • [5] Microstructure and corrosion behavior of rapidly solidified Mg-Zn-Y alloys
    S. W. Nam
    W. T. Kim
    D. H. Kim
    T. S. Kim
    Metals and Materials International, 2013, 19 : 205 - 209
  • [6] MICROSTRUCTURE AND STRENGTH OF RAPIDLY SOLIDIFIED MAGNESIUM ALLOYS
    IWASAKI, H
    MORI, T
    TAMURA, A
    HIGASHI, K
    TANIMURA, S
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 179 : 712 - 716
  • [7] The microstructure of rapidly solidified Al-Zn-Mg-Cu alloys with Zr addition
    Litynska-Dobrzynska, Lidia
    Ochin, Patrick
    Goral, Anna
    Faryna, Marek
    Dutkiewicz, Jan
    APPLIED CRYSTALLOGRAPHY XXI, 2010, 163 : 42 - +
  • [8] DC Casting - Simulation and Microstructure of Mg-Zn Alloys
    Harel, Galia
    Bamberger, Menachem
    Rami, Y.
    Spigarelli, S.
    El Mehtedi, M. I.
    Cupito, G.
    THERMEC 2009, PTS 1-4, 2010, 638-642 : 1518 - +
  • [9] Effect of Ce on microstructures and mechanical properties of rapidly solidified Mg-Zn alloy
    Zhou, T.
    Xia, H.
    Chen, Z. H.
    MATERIALS SCIENCE AND TECHNOLOGY, 2011, 27 (07) : 1198 - 1205
  • [10] Microstructure and mechanical properties of directionally solidified Mg-Zn alloy as a biomaterial
    Jia, Hongmin
    Feng, Xiaohui
    Yang, Yuansheng
    MATERIALS SCIENCE AND TECHNOLOGY, 2019, 35 (18) : 2165 - 2172
12345