Thermodynamic characteristics of a low concentration methane catalytic combustion gas turbine

被引:43
|
作者
Yin, Juan [1 ,2 ]
Su, Shi [1 ]
Yu, Xin Xiang [1 ]
Weng, Yiwu [2 ]
机构
[1] CSIRO, Kenmore, Qld 4069, Australia
[2] Shanghai Jiao Tong Univ, Sch Mech & Power Engn, Shanghai, Peoples R China
关键词
Fugitive methane; Gas turbine; Catalytic combustion; Thermodynamics; Exergy; Cycle efficiency; CYCLE;
D O I
10.1016/j.apenergy.2009.12.011
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
Low concentration methane, emitted from coal mines, landfill, animal waste, etc. into the atmosphere, is not only a greenhouse gas, but also a waste energy source if not utilised. Methane is 23 times more potent than CO2 in terms of trapping heat in the atmosphere over a timeframe of 100 years. This paper studies a novel lean burn catalytic combustion gas turbine, which can be powered with about 1% methane (volume) in air. When this technology is successfully developed, it can be used not only to mitigate the methane for greenhouse gas reduction, but also to utilise such methane as a clean energy source. This paper presents our study results on the thermodynamic characteristics of this new lean burn catalytic combustion gas turbine system by conducting thermal performance analysis of the turbine cycle. The thermodynamic data including thermal efficiencies and exergy loss of main components of the turbine system are presented under different pressure ratios, turbine inlet temperatures and methane concentrations. Crown Copyright (C) 2009 Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码:2102 / 2108
页数:7
相关论文
共 50 条
  • [41] Numerical Study on the Catalytic Combustion Characteristics of Ultra-Low Calorific Value Coalbed Methane
    Yu, Zhou
    2023 4TH INTERNATIONAL CONFERENCE ON CLEAN AND GREEN ENERGY ENGINEERING, CGEE, 2023, : 123 - 127
  • [42] Impact of low-temperature and water immersion on the response characteristics of catalytic combustion methane detectors
    He Q.
    Nie S.
    Zhang H.
    Liu X.
    Guo X.
    Xu L.
    Qinghua Daxue Xuebao/Journal of Tsinghua University, 2024, 64 (06): : 965 - 974
  • [43] Ignition and combustion characteristics of the gas turbine slinger combustor
    Choi, Seongman
    Lee, Donghun
    Park, Jeongbae
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2008, 22 (03) : 538 - 544
  • [44] Gas Turbine Emission Characteristics in Perfectly Premixed Combustion
    Elkady, A. M.
    Herbon, J.
    Kalitan, D. M.
    Leonard, G.
    Akula, R.
    Karim, H.
    Hadley, M.
    JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 2012, 134 (06):
  • [45] Ignition and combustion characteristics of the gas turbine slinger combustor
    Seongman Choi
    Donghun Lee
    Jeongbae Park
    Journal of Mechanical Science and Technology, 2008, 22 : 538 - 544
  • [46] Experiment on combustion characteristics of micro gas turbine combustor
    Liu A.
    Li Y.
    Yang Y.
    Zeng W.
    Liu K.
    1600, BUAA Press (35): : 1335 - 1344
  • [47] GAS TURBINE EMISSION CHARACTERISTICS IN PERFECTLY PREMIXED COMBUSTION
    Elkady, A. M.
    Kalitan, D. M.
    Herbon, J.
    Leonard, G.
    Akula, R.
    Karim, H.
    Hadley, M.
    PROCEEDINGS OF THE ASME TURBO EXPO 2011, VOL 2, PTS A AND B, 2011, : 1173 - 1182
  • [48] HYDROGEN ENRICHMENT IMPACT ON GAS TURBINE COMBUSTION CHARACTERISTICS
    Mohammad, Bassam S.
    McManus, Keith
    Brand, Anthony
    Elkady, Ahmed M.
    Cuppoletti, Daniel
    PROCEEDINGS OF THE ASME TURBO EXPO 2020: TURBOMACHINERY TECHNICAL CONFERENCE AND EXHIBITION, VOL 4B, 2020,
  • [49] Experimental research of inert particle effect on low concentration methane combustion characteristics in a fluidized bed
    Tang, Qiang
    Song, Yun
    Yang, Zhong-Qing
    Liu, Chuan-Chuan
    Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics, 2014, 35 (06): : 1232 - 1235
  • [50] Numerical Analysis of the Combustion in Micro Gas Turbine with Methane/Biogas Fuels
    Xiaoyu Chen
    Weiguo Zhou
    Yunfei Jia
    Junying Tang
    Arabian Journal for Science and Engineering, 2021, 46 : 11897 - 11907